Jump to content

Just installed a ryzen 1700 with an h100i GTX. Temps I'm getting are around 45°C idle no OC, is this alright? Could be better?

Community Standards || Tech News Posting Guidelines

---======================================================================---

CPU: R5 9600X || GPU: RX 9070 XT|| Memory: 32GB || Cooler: Peerless Assassin || PSU: RM850e|| Case: Lian Li A3

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/
Share on other sites

Link to post
Share on other sites

Idle, load, gaming, stress tested?

My daily driver: The Wrath of Red: OS Windows 10 home edition / CPU Ryzen TR4 1950x 3.85GHz / Cooler Master MasterAir MA621P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / ASRock x399 Taichi / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / Samsung 512GB 970 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor x3

 

My technology Rig: The wizard: OS Windows 10 home edition / CPU Ryzen R7 1800x 3.95MHz / Corsair H110i / PSU Thermaltake Toughpower 750watt / ASUS CH 6 / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / 512GB 960 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor HP Monitor

 

My I don't use RigOS Windows 10 home edition / CPU Ryzen 1600x 3.85GHz / Cooler Master MasterAir MA620P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / MSI x370 Gaming Pro Carbon / Gskill Flare X 32GB DDR4 3200Mhz / Samsung PM961 256GB M.2 PCIe Internal SSDEVGA GeForce GTX 1050 Ti SSC GAMING / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor

 

My NAS: The storage miser: OS unRAID v. 6.9.0-beta25 / CPU Intel i7 6700 / Cooler Master MasterWatt Lite 500 Watt 80 Plus / ASUS Maximus viii Hero / 32GB Gskill RipJaw DDR4 3200Mhz / HP Mellanox ConnectX-2 10 GbE PCI-e G2 Dual SFP+ Ported Ethernet HCA NIC / 9 Drives total 29TB - 1 4TB seagate parity - 7 4TB WD Red data - 1 1TB laptop drive data - and 2 240GB Sandisk SSD's cache / Headless

 

Why did I buy this server: OS unRAID v. 6.9.0-beta25 / Dell R710 enterprise server with dual xeon E5530 / 48GB ecc ddr3 / Dell H310 6Gbps SAS HBA w/ LSI 9211-8i P20 IT / 4 450GB sas drives / headless

 

Just another server: OS Proxmox VE / Dell poweredge R410

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10562480
Share on other sites

Link to post
Share on other sites

2 minutes ago, mrbilky said:

Idle, load, gaming, stress tested?

Idle, updated the post.

Community Standards || Tech News Posting Guidelines

---======================================================================---

CPU: R5 9600X || GPU: RX 9070 XT|| Memory: 32GB || Cooler: Peerless Assassin || PSU: RM850e|| Case: Lian Li A3

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10562491
Share on other sites

Link to post
Share on other sites

I would say being on water yes, my 1800x is overclocked to 39.25 and I idle at 31c what are you getting under load?

My daily driver: The Wrath of Red: OS Windows 10 home edition / CPU Ryzen TR4 1950x 3.85GHz / Cooler Master MasterAir MA621P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / ASRock x399 Taichi / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / Samsung 512GB 970 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor x3

 

My technology Rig: The wizard: OS Windows 10 home edition / CPU Ryzen R7 1800x 3.95MHz / Corsair H110i / PSU Thermaltake Toughpower 750watt / ASUS CH 6 / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / 512GB 960 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor HP Monitor

 

My I don't use RigOS Windows 10 home edition / CPU Ryzen 1600x 3.85GHz / Cooler Master MasterAir MA620P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / MSI x370 Gaming Pro Carbon / Gskill Flare X 32GB DDR4 3200Mhz / Samsung PM961 256GB M.2 PCIe Internal SSDEVGA GeForce GTX 1050 Ti SSC GAMING / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor

 

My NAS: The storage miser: OS unRAID v. 6.9.0-beta25 / CPU Intel i7 6700 / Cooler Master MasterWatt Lite 500 Watt 80 Plus / ASUS Maximus viii Hero / 32GB Gskill RipJaw DDR4 3200Mhz / HP Mellanox ConnectX-2 10 GbE PCI-e G2 Dual SFP+ Ported Ethernet HCA NIC / 9 Drives total 29TB - 1 4TB seagate parity - 7 4TB WD Red data - 1 1TB laptop drive data - and 2 240GB Sandisk SSD's cache / Headless

 

Why did I buy this server: OS unRAID v. 6.9.0-beta25 / Dell R710 enterprise server with dual xeon E5530 / 48GB ecc ddr3 / Dell H310 6Gbps SAS HBA w/ LSI 9211-8i P20 IT / 4 450GB sas drives / headless

 

Just another server: OS Proxmox VE / Dell poweredge R410

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10562501
Share on other sites

Link to post
Share on other sites

Just now, mrbilky said:

I would say being on water yes, my 1800x is overclocked to 39.25 and I idle at 31c what are you getting under load?

Haven't tested yet, just put the system together- don't have windows installed as of now.

Community Standards || Tech News Posting Guidelines

---======================================================================---

CPU: R5 9600X || GPU: RX 9070 XT|| Memory: 32GB || Cooler: Peerless Assassin || PSU: RM850e|| Case: Lian Li A3

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10562505
Share on other sites

Link to post
Share on other sites

I'd say that's a bit hot, but as you didn't mention ambient temp don't have anything to go on really. Mine OC'ed to 3.85Ghz all cores, Ambient of between 16-20 with the wraith cooler on idle sits around 26-40 on idle, depending on what I actually have going on.. and around 65-75 on full load.

Please quote my post, or put @paddy-stone if you want me to respond to you.

Spoiler
  • PCs:- 
  • Main PC build  https://uk.pcpartpicker.com/list/2K6Q7X
  • ASUS x53e  - i7 2670QM / Sony BD writer x8 / Win 10, Elemetary OS, Ubuntu/ Samsung 830 SSD
  • Lenovo G50 - 8Gb RAM - Samsung 860 Evo 250GB SSD - DVD writer
  •  
  • Displays:-
  • Philips 55 OLED 754 model
  • Panasonic 55" 4k TV
  • LG 29" Ultrawide
  • Philips 24" 1080p monitor as backup
  •  
  • Storage/NAS/Servers:-
  • ESXI/test build  https://uk.pcpartpicker.com/list/4wyR9G
  • Main Server https://uk.pcpartpicker.com/list/3Qftyk
  • Backup server - HP Proliant Gen 8 4 bay NAS running FreeNAS ZFS striped 3x3TiB WD reds
  • HP ProLiant G6 Server SE316M1 Twin Hex Core Intel Xeon E5645 2.40GHz 48GB RAM
  •  
  • Gaming/Tablets etc:-
  • Xbox One S 500GB + 2TB HDD
  • PS4
  • Nvidia Shield TV
  • Xiaomi/Pocafone F2 pro 8GB/256GB
  • Xiaomi Redmi Note 4

 

  • Unused Hardware currently :-
  • 4670K MSI mobo 16GB ram
  • i7 6700K  b250 mobo
  • Zotac GTX 1060 6GB Amp! edition
  • Zotac GTX 1050 mini

 

 

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10562526
Share on other sites

Link to post
Share on other sites

Well I run at 65c under full load in aida54 I have to ask but did you remember to pull the plastic off the plate before install that idle temp is way high for being on water have you checked corsair link to see that all is running well i.e. pump, fans what point are you monitoring with cpu, fluid temp? MB temps? You'll need to run these things to get a baseline before you'll be able to be assisted

My daily driver: The Wrath of Red: OS Windows 10 home edition / CPU Ryzen TR4 1950x 3.85GHz / Cooler Master MasterAir MA621P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / ASRock x399 Taichi / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / Samsung 512GB 970 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor x3

 

My technology Rig: The wizard: OS Windows 10 home edition / CPU Ryzen R7 1800x 3.95MHz / Corsair H110i / PSU Thermaltake Toughpower 750watt / ASUS CH 6 / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / 512GB 960 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor HP Monitor

 

My I don't use RigOS Windows 10 home edition / CPU Ryzen 1600x 3.85GHz / Cooler Master MasterAir MA620P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / MSI x370 Gaming Pro Carbon / Gskill Flare X 32GB DDR4 3200Mhz / Samsung PM961 256GB M.2 PCIe Internal SSDEVGA GeForce GTX 1050 Ti SSC GAMING / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor

 

My NAS: The storage miser: OS unRAID v. 6.9.0-beta25 / CPU Intel i7 6700 / Cooler Master MasterWatt Lite 500 Watt 80 Plus / ASUS Maximus viii Hero / 32GB Gskill RipJaw DDR4 3200Mhz / HP Mellanox ConnectX-2 10 GbE PCI-e G2 Dual SFP+ Ported Ethernet HCA NIC / 9 Drives total 29TB - 1 4TB seagate parity - 7 4TB WD Red data - 1 1TB laptop drive data - and 2 240GB Sandisk SSD's cache / Headless

 

Why did I buy this server: OS unRAID v. 6.9.0-beta25 / Dell R710 enterprise server with dual xeon E5530 / 48GB ecc ddr3 / Dell H310 6Gbps SAS HBA w/ LSI 9211-8i P20 IT / 4 450GB sas drives / headless

 

Just another server: OS Proxmox VE / Dell poweredge R410

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10562530
Share on other sites

Link to post
Share on other sites

3 hours ago, mrbilky said:

Well I run at 65c under full load in aida54 I have to ask but did you remember to pull the plastic off the plate before install that idle temp is way high for being on water have you checked corsair link to see that all is running well i.e. pump, fans what point are you monitoring with cpu, fluid temp? MB temps? You'll need to run these things to get a baseline before you'll be able to be assisted

Just got into corsair link, the cooler isn't showing up. And before that, on post it states that there was a cpu fan error.

Community Standards || Tech News Posting Guidelines

---======================================================================---

CPU: R5 9600X || GPU: RX 9070 XT|| Memory: 32GB || Cooler: Peerless Assassin || PSU: RM850e|| Case: Lian Li A3

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10563261
Share on other sites

Link to post
Share on other sites

Is the usb2 connector in all the way on both the block and the board? Make sure the pump control wire in in the cpu fan header and you may need to make a change in your bios if the cpu fan header is not set to monitor not sure think it is my asus board that needed to be changed if not it was my msi board

My daily driver: The Wrath of Red: OS Windows 10 home edition / CPU Ryzen TR4 1950x 3.85GHz / Cooler Master MasterAir MA621P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / ASRock x399 Taichi / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / Samsung 512GB 970 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor x3

 

My technology Rig: The wizard: OS Windows 10 home edition / CPU Ryzen R7 1800x 3.95MHz / Corsair H110i / PSU Thermaltake Toughpower 750watt / ASUS CH 6 / Gskill Flare X 32GB DDR4 3200Mhz / HP 10GB Single Port Mellanox Connectx-2 PCI-E 10GBe NIC / 512GB 960 pro M.2 / ASUS GeForce GTX 1080 STRIX 8GB / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor HP Monitor

 

My I don't use RigOS Windows 10 home edition / CPU Ryzen 1600x 3.85GHz / Cooler Master MasterAir MA620P Twin-Tower RGB CPU Air Cooler / PSU Thermaltake Toughpower 750watt / MSI x370 Gaming Pro Carbon / Gskill Flare X 32GB DDR4 3200Mhz / Samsung PM961 256GB M.2 PCIe Internal SSDEVGA GeForce GTX 1050 Ti SSC GAMING / Acer - H236HLbid 23.0" 1920x1080 60Hz Monitor

 

My NAS: The storage miser: OS unRAID v. 6.9.0-beta25 / CPU Intel i7 6700 / Cooler Master MasterWatt Lite 500 Watt 80 Plus / ASUS Maximus viii Hero / 32GB Gskill RipJaw DDR4 3200Mhz / HP Mellanox ConnectX-2 10 GbE PCI-e G2 Dual SFP+ Ported Ethernet HCA NIC / 9 Drives total 29TB - 1 4TB seagate parity - 7 4TB WD Red data - 1 1TB laptop drive data - and 2 240GB Sandisk SSD's cache / Headless

 

Why did I buy this server: OS unRAID v. 6.9.0-beta25 / Dell R710 enterprise server with dual xeon E5530 / 48GB ecc ddr3 / Dell H310 6Gbps SAS HBA w/ LSI 9211-8i P20 IT / 4 450GB sas drives / headless

 

Just another server: OS Proxmox VE / Dell poweredge R410

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10564670
Share on other sites

Link to post
Share on other sites

Download AIDA64 and do some stress testing to let us know what temps you get under load.

But 45°C at idle with no OC seems too high.

I get that temp at idle with 3,8GHz OC.

 

My stock temps were around 35°C at most when idle and that's with air cooling (signature).

Test what temps you get under load (stress testing), then report back to us :)

Intel i7 12700K | Gigabyte Z690 Gaming X DDR4 | Pure Loop 240mm | G.Skill 3200MHz 32GB CL14 | CM V850 G2 | RTX 3070 Phoenix | Lian Li O11 Air mini

Samsung EVO 960 M.2 250GB | Samsung EVO 860 PRO 512GB | 4x Be Quiet! Silent Wings 140mm fans

WD My Cloud 4TB

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10564741
Share on other sites

Link to post
Share on other sites

Same temps I'm getting with my 1700x After reseating the cooler about 3 times I was able to get down to 30-35 degrees idle and 70 degrees under load. That's at a 3.8 overclock though. I just ordered a Kraken x62 just to see if there is any difference over the DeepCool Captain 240 I was running. I was not very happy with my temps either, but upon searching, it seems 30-40 degrees idle is pretty standard for the 1700-1800. There are people getting less, but most are in the 30's

 Current System: MoonLightRyzen

CPU: Ryzen 7 1700x @ 3.9ghz  Board: Asus ROG C6H  Ram: G.Skill TridentZ 32gb 3000mhz  Case: Lian Li PC-O11 Dynamic

GPU: Asus ROG Strix GTX 1070 OC in SLI M.2: Samsung 960 Evo 250gb SSD: Samsung 850 Pro 512gb x2 HDD: Seagate Barracuda 3TB and 2TB

PSU: Corsair RM850x White  Cooler: XSPC/Phanteks Custom Loop 

Backup System: RedDragonV3.0

FX-8350 @ 4.7ghz, Asus TUF Sabertooth 990fx r3.0, MSI GTX 1060 6gb Gaming X, Crucial Balistix Tracer 32gb, M.2 Samsung 960 Evo 250,

Seagate Firecudda 2tb, Seagate Barracuda 2tb, NZXT S340 Elite White, Kraken X62, Corsair RM750x, Hue+

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10564754
Share on other sites

Link to post
Share on other sites

4 hours ago, mrbilky said:

Is the usb2 connector in all the way on both the block and the board? Make sure the pump control wire in in the cpu fan header and you may need to make a change in your bios if the cpu fan header is not set to monitor not sure think it is my asus board that needed to be changed if not it was my msi board

Everything has been reseated and plugged back in at least 3 times now. Still no difference. Bios was already set to monitor. Going to throw the stock cooler one to see here.

Community Standards || Tech News Posting Guidelines

---======================================================================---

CPU: R5 9600X || GPU: RX 9070 XT|| Memory: 32GB || Cooler: Peerless Assassin || PSU: RM850e|| Case: Lian Li A3

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10565674
Share on other sites

Link to post
Share on other sites

Update: so I threw the stock cooler in- no more CPU fan error and temps are down to 25°. Looks like I'm dropping 100$ on a dark rock 3 or something of the likes.

Community Standards || Tech News Posting Guidelines

---======================================================================---

CPU: R5 9600X || GPU: RX 9070 XT|| Memory: 32GB || Cooler: Peerless Assassin || PSU: RM850e|| Case: Lian Li A3

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10565763
Share on other sites

Link to post
Share on other sites

26 minutes ago, dave_k said:

How did you see idle when you havent installed windows?

Sorry, meaning bios temps. Though after getting windows installed I was working with the same numbers.

Community Standards || Tech News Posting Guidelines

---======================================================================---

CPU: R5 9600X || GPU: RX 9070 XT|| Memory: 32GB || Cooler: Peerless Assassin || PSU: RM850e|| Case: Lian Li A3

Link to comment
https://linustechtips.com/topic/847082-ryzen-1700-temps/#findComment-10566007
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×