Xmp profile problem

[Anas Dweik]

Hi guys. 

I have corsair vengeance 3200mhz speed.

With xmp profile off I take 2133mhz speed

And the windows boots normally.

With xmp profile on I take 2400mhz. And windows boots normally .

 I am trying to reach my full ram speed 3200. But when I manually put the ram at 3200 I take massage from bios "All settings were rest to default values".

And  sometimes xmp profile works and give me 3200mhz but I take this screen fromis windows "the photo"

I tried to rest bios manually from mobo

And I have the last bios update 

"Sorry for my bad English"

Edited September 4, 2017 by W-L
Merged Thread

[ACEHACK]

do u have the latest bios update and whats your mobo

[Glennieboyyy007]

have you tried googling it? maybe try this site?

[ACEHACK]

is there an auto reset option or something like that in your bios maybe try to reflash your bios 

6 minutes ago, Anas Dweik said:

Hi guys. 

I have corsair vengeance 3200mhz speed.

With xmp profile off I take 2133mhz speed

And the windows boots normally.

With xml profile on I take 2400mhz. And windows boots normally .

 I am trying to reach my full ram speed 3200. But when I manually put the ram at 3200 I take massage from bios "All settings were rest to default values".

And  sometimes xmp profile works andfor give me 3200mhz but I take this screen fromis windows "the photo"

I tried to rest bios manually from mobo

And I have the last bios update

 

[Anas Dweik]

Just now, ACEHACK said:

is there an auto reset option or something like that in your bios maybe try to reflash your bios 

 

it was working fine before. but today i checked my old rams if they are working , so i put them into my pc for like 1m the pc detect there is a new ram with 2133 speed "they don't support xmp profle" after i checked . the problem started. but i will try to reflash.

[SquintyG33Rs]

23 minutes ago, Anas Dweik said:

it was working fine before. but today i checked my old rams if they are working , so i put them into my pc for like 1m the pc detect there is a new ram with 2133 speed "they don't support xmp profle" after i checked . the problem started. but i will try to reflash.

there is usually 2 XMP profiles loaded on the ram. XMP 1 will be the 2400 XMP 2 will be your full speed one. what CPU and motherboard are you using?

[Anas Dweik]

35 minutes ago, Glennieboyyy007 said:

have you tried googling it? maybe try this site?

Didn't work

[Glennieboyyy007]

ram speed aren't fully guarranteed to work on all mobo's and cpu's. try lowering it to 3000Mhz or even 2666Mhz and see if it works then.

[W-L]

-Multiple Topics Merged- 

[Anas Dweik]

Any help ?

[Anas Dweik]

On 9/4/2017 at 9:40 AM, Glennieboyyy007 said:

ram speed aren't fully guarranteed to work on all mobo's and cpu's. try lowering it to 3000Mhz or even 2666Mhz and see if it works then.

It worked at 3100 , but 3200 nope

[Glennieboyyy007]

4 hours ago, Anas Dweik said:

It worked at 3100 , but 3200 nope

then you are unlucky, as rated speeds are speeds that most likely will work on al cpu's, but not every single one of them. stick to 3100mhz, as the difference between 3100 and 3200 is very small

[Anas Dweik]

2 minutes ago, Glennieboyyy007 said:

then you are unlucky, as rated speeds are speeds that most likely will work on al cpu's, but not every single one of them. stick to 3100mhz, as the difference between 3100 and 3200 is very small

Yep , thanks for help