How many of what fittings

[GeorgeDouj88]

This is my first time water cooling and I will be using PETG tubing to do my build. I chose all my parts, except my radiators which I have some in mind, but I still need help finding fittings. What I want to know is what is the minimum required fittings (ie. fittings into the GPU and CPU and fittings into the reservoirs and pumps) for a water loop like mine (GPU Loop and CPU Loop). Any help would be appreciated .

[Max_Settings]

No way for us to know without your loop map. And since you are doing hardline you might use more than what we suggest because you might use them for bends.

[W-L]

3 minutes ago, G3ORG3Douj88 said:

This is my first time water cooling and I will be using PETG tubing to do my build. I chose all my parts, except my radiators which I have some in mind, but I still need help finding fittings. What I want to know is what is the minimum required fittings (ie. fittings into the GPU and CPU and fittings into the reservoirs and pumps) for a water loop like mine (GPU Loop and CPU Loop). Any help would be appreciated .

You will require two per watercooling component, angled adapter fittings though will depend on the tubing routing and your setup. 

[Damascus]

I'm  going to assume that you have a seperate pump and reservoir, not a pump res combo.  if that is the case you will need at least, but maybe more,

 

CPU - 2

GPU - 2

RES - 2 

PUMP - 2

RAD - 2

 

Total of 10.  If you like RGB swagger, thermaltake has some hardline RGB fittings.  Other then that get monsoon, bitspower or barrow hard tubing.  Barrow actually sells a kit with tubing, fittings and an RGB block on ebay/ali express

[PPCs-Matt]

Feel free to check out are many PETG kits. They are all CPU only loops, but you could easily add in a GPU with a block and 2 more fittings.  
http://www.performance-pcs.com/complete-kits/shopby/brand--modmytoys/

[GeorgeDouj88]

On 7/28/2017 at 11:53 PM, Damascus said:

I'm  going to assume that you have a seperate pump and reservoir, not a pump res combo.  if that is the case you will need at least, but maybe more,

 

CPU - 2

GPU - 2

RES - 2 

PUMP - 2

RAD - 2

 

Total of 10.  If you like RGB swagger, thermaltake has some hardline RGB fittings.  Other then that get monsoon, bitspower or barrow hard tubing.  Barrow actually sells a kit with tubing, fittings and an RGB block on ebay/ali express

What are the specific fittings called for each thing, is it called GPU fitting + "Blah Blah more info"

[W-L]

1 minute ago, G3ORG3Douj88 said:

What are the specific fittings called for each thing, is it called GPU fitting + "Blah Blah more info"

They are hardline compression fittings you will want to look for, here's an example, the tubing size and fitting size must be exact and match. 

https://www.ekwb.com/shop/ek-hdc-fitting-12mm-g1-4-black-6275

 

https://www.ekwb.com/blog/fittings-and-tubing-guide/