Jump to content

i installed openvpn server and get this error

Turtleinahafshel
By Turtleinahafshel
in Networking
 Share
Posted

when i try to connect i get this error and it fails then tries to reconnect how could i fix this

 

Jun 09 2:47:58 PM: State changed to Creating...
Jun 09 2:47:59 PM: State changed to Disconnected
Jun 09 2:48:12 PM: State changed to Connecting
Jun 09 2:48:12 PM: Viscosity Windows 1.7.1 (1513)
Jun 09 2:48:13 PM: Running on Microsoft Windows 10 Pro Insider Preview
Jun 09 2:48:13 PM: Bringing up interface...
Jun 09 2:48:13 PM: Checking reachability status of connection...
Jun 09 2:48:13 PM: Connection is reachable. Starting connection attempt.
Jun 09 2:48:13 PM: OpenVPN 2.4.2 Windows-MSVC [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [AEAD] built on May 30 2017
Jun 09 2:48:13 PM: library versions: OpenSSL 1.0.2l  25 May 2017, LZO 2.09
Jun 09 2:48:14 PM: TCP/UDP: Preserving recently used remote address: [AF_INET]104.2.9.35:443
Jun 09 2:48:14 PM: UDP link local: (not bound)
Jun 09 2:48:14 PM: UDP link remote: [AF_INET]104.2.9.35:443
Jun 09 2:48:14 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:48:16 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:48:19 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:48:27 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:48:43 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:49:13 PM: TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Jun 09 2:49:13 PM: TLS Error: TLS handshake failed
Jun 09 2:49:13 PM: SIGUSR1[soft,tls-error] received, process restarting
Jun 09 2:49:13 PM: State changed to Connecting
Jun 09 2:49:23 PM: TCP/UDP: Preserving recently used remote address: [AF_INET]104.2.9.35:443
Jun 09 2:49:23 PM: UDP link local: (not bound)
Jun 09 2:49:23 PM: UDP link remote: [AF_INET]104.2.9.35:443
Jun 09 2:49:23 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:49:26 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:49:29 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:49:37 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:49:53 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:50:23 PM: TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Jun 09 2:50:23 PM: TLS Error: TLS handshake failed
Jun 09 2:50:23 PM: SIGUSR1[soft,tls-error] received, process restarting
Jun 09 2:50:23 PM: State changed to Connecting
Jun 09 2:50:33 PM: TCP/UDP: Preserving recently used remote address: [AF_INET]104.2.9.35:443
Jun 09 2:50:33 PM: UDP link local: (not bound)
Jun 09 2:50:33 PM: UDP link remote: [AF_INET]104.2.9.35:443
Jun 09 2:50:33 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:50:35 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:50:39 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:50:47 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:51:03 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:51:33 PM: TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Jun 09 2:51:33 PM: TLS Error: TLS handshake failed
Jun 09 2:51:33 PM: SIGUSR1[soft,tls-error] received, process restarting
Jun 09 2:51:33 PM: State changed to Connecting
Jun 09 2:51:44 PM: TCP/UDP: Preserving recently used remote address: [AF_INET]104.2.9.35:443
Jun 09 2:51:44 PM: UDP link local: (not bound)
Jun 09 2:51:44 PM: UDP link remote: [AF_INET]104.2.9.35:443
Jun 09 2:51:44 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:51:46 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)
Jun 09 2:51:50 PM: read UDP: Connection reset by peer (WSAECONNRESET) (code=10054)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 hours ago, TapfererToaster said:

Is the port forwarding on the server set correctly?

Yes I have tried it many different ways and don’t know what is messing it up I have tried 443 and the default one which I thing is 1194 or something close to that

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
4 hours ago, Turtleinahafshel said:

Yes I have tried it many different ways and don’t know what is messing it up I have tried 443 and the default one which I thing is 1194 or something close to that

 

So i assume looking at the startup this is on Windows 10 - is your Windows Firewall turned on?

If so, have you allowed Port 443 Outgoing for UDP for all domains (Domain/Private/Public) ?

Should it be running as UDP, or should it be TCP?

Spoiler

Desktop: Ryzen9 5950X | ASUS ROG Crosshair VIII Hero (Wifi) | EVGA RTX 3080Ti FTW3 | 32GB (2x16GB) Corsair Dominator Platinum RGB Pro 3600Mhz | EKWB EK-AIO 360D-RGB | EKWB EK-Vardar RGB Fans | 1TB Samsung 980 Pro, 4TB Samsung 980 Pro | Corsair 5000D Airflow | Corsair HX850 Platinum PSU | Asus ROG 42" OLED PG42UQ + LG 32" 32GK850G Monitor | Roccat Vulcan TKL Pro Keyboard | Logitech G Pro X Superlight  | MicroLab Solo 7C Speakers | Audio-Technica ATH-M50xBT2 LE Headphones | TC-Helicon GoXLR | Audio-Technica AT2035 | LTT Desk Mat | XBOX-X Controller | Windows 11 Pro

 

Spoiler

Server: Fractal Design Define R6 | Ryzen 3950x | ASRock X570 Taichi | EVGA GTX1070 FTW | 64GB (4x16GB) Corsair Vengeance LPX 3000Mhz | Corsair RM850v2 PSU | Fractal S36 Triple AIO + 4 Additional Venturi 120mm Fans | 14 x 20TB Seagate Exos X22 20TB | 500GB Aorus Gen4 NVMe | 2 x 2TB Samsung 970 Evo Plus NVMe | LSI 9211-8i HBA

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
6 hours ago, Jarsky said:

 

So i assume looking at the startup this is on Windows 10 - is your Windows Firewall turned on?

If so, have you allowed Port 443 Outgoing for UDP for all domains (Domain/Private/Public) ?

Should it be running as UDP, or should it be TCP?

i have tried it on windows and ios and with udp and tcp. but yes the log was on windows 10.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
28 minutes ago, Turtleinahafshel said:

i have tried it on windows and ios and with udp and tcp. but yes the log was on windows 10.

 

Try changing the port back to the standard 1194 - and disable your Windows Firewall completely and try connecting - see if you get the same message.

If it still doesn't connect then try a telnet to the port.  From CMD -  telnet <address> <port>

 

It may be getting blocked on your router still.

You might want to see if there is an IPSec option for your router, if so check that it is enabled.

Spoiler

Desktop: Ryzen9 5950X | ASUS ROG Crosshair VIII Hero (Wifi) | EVGA RTX 3080Ti FTW3 | 32GB (2x16GB) Corsair Dominator Platinum RGB Pro 3600Mhz | EKWB EK-AIO 360D-RGB | EKWB EK-Vardar RGB Fans | 1TB Samsung 980 Pro, 4TB Samsung 980 Pro | Corsair 5000D Airflow | Corsair HX850 Platinum PSU | Asus ROG 42" OLED PG42UQ + LG 32" 32GK850G Monitor | Roccat Vulcan TKL Pro Keyboard | Logitech G Pro X Superlight  | MicroLab Solo 7C Speakers | Audio-Technica ATH-M50xBT2 LE Headphones | TC-Helicon GoXLR | Audio-Technica AT2035 | LTT Desk Mat | XBOX-X Controller | Windows 11 Pro

 

Spoiler

Server: Fractal Design Define R6 | Ryzen 3950x | ASRock X570 Taichi | EVGA GTX1070 FTW | 64GB (4x16GB) Corsair Vengeance LPX 3000Mhz | Corsair RM850v2 PSU | Fractal S36 Triple AIO + 4 Additional Venturi 120mm Fans | 14 x 20TB Seagate Exos X22 20TB | 500GB Aorus Gen4 NVMe | 2 x 2TB Samsung 970 Evo Plus NVMe | LSI 9211-8i HBA

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
On 6/11/2017 at 11:38 AM, Jarsky said:

 

Try changing the port back to the standard 1194 - and disable your Windows Firewall completely and try connecting - see if you get the same message.

If it still doesn't connect then try a telnet to the port.  From CMD -  telnet <address> <port>

 

It may be getting blocked on your router still.

You might want to see if there is an IPSec option for your router, if so check that it is enabled.

i found the issue my isp or router makes all the devices have the same public ip. so if i don't set one i can vpn in the network. so i need to find out the public ip solution but until then i have i semi useful vpn.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Networking

×