I Will need a good cooler to use the turbo mode on fx 6300

[Gustavok3000]

I Will need a good cooler to use the turbo mode on fx 6300 ?

[KeFy]

water or air ?

[KeFy]

if its air you are looking for this is a good option https://www.amazon.co.uk/Cooler-Master-Hyper-212-120mm/dp/B0068OI7T8/ref=sr_1_1?ie=UTF8&qid=1398115886&sr=8-1&keywords=cpu+cooler

[mechtech]

As long as you don't overclock, an aftermarket cooler is not a necessity. Turbo mode on the FX6300 has two levelsif I remember correctly, and using the highest one will require a better cooler.

 

If you can get an aftermarket cooler for $20-$40 USD max, I would go for it. I built an FX6300 for my nephew already a few years back, and my first complaint was noise  That thing is loud. Plus a cheap aftermarket cooler will still perform considerably better than any stock cooling solution,

But no need to go crazy.

[Gustavok3000]

OK thx i Will use the wraith but i Will see this prossesor 

[m0k]

you dont need much to cool that CPU and get the turbo speeds

 

my phenom 1090t with a scythe ninja cooler turbo's up to 3.7ghz comfortably despite being an older 125watt cpu

max temp is 40c

 

considering your fx 6300 is only a 95watt tdp cpu you should be fine with a hyper 212