gainward or gigabyte?

[Ironi]

should i go with the

gigabyte https://tweakers.net/pricewatch/554667/gigabyte-geforce-gtx-1070-windforce-oc-8gb.html

or the

gainward https://tweakers.net/pricewatch/564001/gainward-geforce-gtx-1070-8gb.html

(dont say get another one because these are the cheapest ones and i am getting on of those)

my build is black n red. will you see the ugly orange lines of the gigabyte 1070? or should i just paint those lines red

are they both sli able?

[Nena Trinity]

Gigabyte gets my vote.

[Ironi]

10 minutes ago, Nena360 said:

Gigabyte gets my vote.

and why

[Thony]

This is hard as fuck to be honest. Many youtube reviewers said that 1070 boards all perform about the same with very small differences (5%).

 

Gainward has always been the cheap solution but with 1070 I have no idea.

 

Either get a 1st hand answer from someone who owns the gpu or look up Gainward 1070 youtube reviews to see the temps (fan design is the main difference, performance wise its about same).

[WereCat]

I have Palit 1060 with almost the identical cooler as on this Gainward card and it is quite decent.

My personal opinion is that go with the cheapest dual fan cooler and you are set as you are not really limited with cooler on Pascal when overclocking.

[Shubham Yadav]

I have the G1 gaming 1060 which has the exact same cooler and the orange lines. And no, you don't see the lines. 

[BolginNT]

16 minutes ago, Wulfje said:

should i go with the

gigabyte https://tweakers.net/pricewatch/554667/gigabyte-geforce-gtx-1070-windforce-oc-8gb.html

or the

gainward https://tweakers.net/pricewatch/564001/gainward-geforce-gtx-1070-8gb.html

(dont say get another one because these are the cheapest ones and i am getting on of those)

my build is black n red. will you see the ugly orange lines of the gigabyte 1070? or should i just paint those lines red

are they both sli able?

In this case it really comes down to aesthetics and your preference in that matter. Both cards will have very similar, if not identical cooling capabilities.

I had a GTX1060 from Gainward with same cooler. It did the job, but did it loud. I dont expect the Gigabyte model to perform any differently since both models are the cheapest solutions from mentioned manufacturers.

[Nena Trinity]

9 minutes ago, Wulfje said:

and why

Gigabyte is the company with fewest RMAs last time I checked!

[Benny Skyfaker]

In my personal opinion, EVGA kicks ass, but(there is always a but) I have never used gainward sollutions, only gigabyte and EVGA. 

Currently I am using gigabyte g1 gaming 970, and I am more than satisfied with it, but(once more, there is always a but) it is not the most silet GPU. 

Go with the largest fans you could afford( bigger fan can push the same ammout of air through te cooling fins at lower rpm, than smaller fan, which makes it quieter). So, bigger the fan, same air flow, lower RPM and noise. Just keep this in your mind when buying any cooling sollutions. 

I hope that helped you a bit.

[Ironi]

Just now, Benny Skyfaker said:

In my personal opinion, EVGA kicks ass, but(there is always a but) I have never used gainward sollutions, only gigabyte and EVGA. 

Currently I am using gigabyte g1 gaming 970, and I am more than satisfied with it, but(once more, there is always a but) it is not the most silet GPU. 

Go with the largest fans you could afford( bigger fan can push the same ammout of air through te cooling fins at lower rpm, than smaller fan, which makes it quieter). So, bigger the fan, same air flow, lower RPM and noise. Just keep this in your mind when buying any cooling sollutions. 

I hope that helped you a bit.

uhhh i dont get this all

[Ironi]

guys imma go with the gainward because thats the cheapest option

[Yahtadi]

G1 because its Gigabyte, shut up.

[Ironi]

Just now, Yahtadi said:

G1 because its Gigabyte, shut up.

ay man calm your tits.

[Yahtadi]

1 minute ago, Wulfje said:

ay man calm your tits.

You wont be able to handle my titties, both are G1 labled

[Ironi]

3 minutes ago, Yahtadi said:

You wont be able to handle my titties, both are G1 labled

oeh shiet. gainward power is comming for ya m8

[Benny Skyfaker]

40 minutes ago, Wulfje said:

uhhh i dont get this all

I'll try once more... The larger the fan is, the lower rpm is needed to push same ammout of air into your cooling fins, as if you would need lower fan at higher rpm.

Meaning(making numbers up just to make you understand, they are not legitimate). Let's say you have 1 140mm fan and 1 70mm fan. To push the same ammount of air in the same time, the 70mm fan would have to spin twice as fast as 140mm fan to push the same ammount of air in the same time. Spining faster--> more noise.

I really hope you will understand this one.