Jump to content

Double boot every time power on

See signature for PC specs. Saves room/effort lol.

 

Every time I turn on or restart my computer, it boots up to the splashscreen, then goes black, and ten seconds later goes back to the splash screen and then boots to Windows. I cannot enter the BIOS on the first splashscreen and all of my USB devices disconnect.

 

Everything works fine, but it's annoying and makes a boot/restart literally take double the time (about one minute, unacceptable with a boot SSD). I'd love to fix this if you have any ideas. Thanks!

 

EDIT: I assume this is a motherboard issue.

EDIT2: I've researched a little and people suggested enabling Wake on PCIe. I did this, but no change.

CPU: i7 6700k (4.7 GHz) | GPU: EVGA GTX 1070 FTW (OC) | Motherboard: ASUS Sabertooth Z170 S | Cooling: Corsair H110i GTX | Storage: 250GB Samsung 850 EVO M.2 + 1TB WD Black | RAM: 16GB (2x8) Corsair Vengeance LED (White) 3000MHz | Case: Phanteks Enthoo Evolv ATX | PSU: Corsair RM850i | WiFi Card: TPLink Archer T9E | Case Fans: Noctua iPPC-2000 PWM (3x 120mm in), 2x Noctua NF-A14 PWM 140mm (radiator, painted black), Fractal Venturi HP-14 (1x 140mm out)  | OS: Windows 10 Home 64-bit

Link to comment
Share on other sites

Link to post
Share on other sites

TFW all the views are you and nobody has replied :( 

CPU: i7 6700k (4.7 GHz) | GPU: EVGA GTX 1070 FTW (OC) | Motherboard: ASUS Sabertooth Z170 S | Cooling: Corsair H110i GTX | Storage: 250GB Samsung 850 EVO M.2 + 1TB WD Black | RAM: 16GB (2x8) Corsair Vengeance LED (White) 3000MHz | Case: Phanteks Enthoo Evolv ATX | PSU: Corsair RM850i | WiFi Card: TPLink Archer T9E | Case Fans: Noctua iPPC-2000 PWM (3x 120mm in), 2x Noctua NF-A14 PWM 140mm (radiator, painted black), Fractal Venturi HP-14 (1x 140mm out)  | OS: Windows 10 Home 64-bit

Link to comment
Share on other sites

Link to post
Share on other sites

Single tear rolls down cheek

 

No ideas?

CPU: i7 6700k (4.7 GHz) | GPU: EVGA GTX 1070 FTW (OC) | Motherboard: ASUS Sabertooth Z170 S | Cooling: Corsair H110i GTX | Storage: 250GB Samsung 850 EVO M.2 + 1TB WD Black | RAM: 16GB (2x8) Corsair Vengeance LED (White) 3000MHz | Case: Phanteks Enthoo Evolv ATX | PSU: Corsair RM850i | WiFi Card: TPLink Archer T9E | Case Fans: Noctua iPPC-2000 PWM (3x 120mm in), 2x Noctua NF-A14 PWM 140mm (radiator, painted black), Fractal Venturi HP-14 (1x 140mm out)  | OS: Windows 10 Home 64-bit

Link to comment
Share on other sites

Link to post
Share on other sites

I have seen this before. I think it happens if you enable S.M.A.R.T test or memory test. Try disabling those, plus make sure Fast Boot is selected.

Core i7 7700k Kabylake stock + Kraken x52 | ASUS Z170-A | 8GB DDR4 2133MHz HyperX | ASUS GeForce GTX 1060 STRIX 6GB | 250GB SSD Samsung 850 EVO + 2TB HDD WD RE4 | Seasonic X-Series 650w | Corsair 460x RGB  | Win 10 Pro 64 bit | Corsair M65 PRO RGB Mouse | Corsair K70 RGB RapidFire

 

Link to comment
Share on other sites

Link to post
Share on other sites

PS. the is another option for splash screen delay. set that to 0 seconds

Core i7 7700k Kabylake stock + Kraken x52 | ASUS Z170-A | 8GB DDR4 2133MHz HyperX | ASUS GeForce GTX 1060 STRIX 6GB | 250GB SSD Samsung 850 EVO + 2TB HDD WD RE4 | Seasonic X-Series 650w | Corsair 460x RGB  | Win 10 Pro 64 bit | Corsair M65 PRO RGB Mouse | Corsair K70 RGB RapidFire

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, xGGAx said:

I have seem this before. I think it happens if you enable S.M.A.R.T test or memory test. Try disabling those, plus make sure Fast Boot is selected.

Alright thanks, I'll check once I'm home. I know I have Fast Boot on. I'll check the tests though. Any idea which BIOS tab so I don't have to go through them all? xD lol

1 minute ago, xGGAx said:

PS. the is another option for splash screen delay. set that to 0 seconds

I have splash screen/post delay at 0. The issue isn't that it takes a while to get to post, it's just that it posts and then restarts itself and then posts again and boots - that's why I'm so confused.

 

Thanks for the ideas!

 

CPU: i7 6700k (4.7 GHz) | GPU: EVGA GTX 1070 FTW (OC) | Motherboard: ASUS Sabertooth Z170 S | Cooling: Corsair H110i GTX | Storage: 250GB Samsung 850 EVO M.2 + 1TB WD Black | RAM: 16GB (2x8) Corsair Vengeance LED (White) 3000MHz | Case: Phanteks Enthoo Evolv ATX | PSU: Corsair RM850i | WiFi Card: TPLink Archer T9E | Case Fans: Noctua iPPC-2000 PWM (3x 120mm in), 2x Noctua NF-A14 PWM 140mm (radiator, painted black), Fractal Venturi HP-14 (1x 140mm out)  | OS: Windows 10 Home 64-bit

Link to comment
Share on other sites

Link to post
Share on other sites

3 hours ago, arch_linuxos said:

Single tear rolls down cheek

 

No ideas?

I have had this issue happen if your overclock is too high and the bios will try to find a stable setting. 

 

Try clearing cmos as well, that usually fixes a lot.

 

 •E5-2670 @2.7GHz • Intel DX79SI • EVGA 970 SSC• GSkill Sniper 8Gb ddr3 • Corsair Spec 02 • Corsair RM750 • HyperX 120Gb SSD • Hitachi 2Tb HDD •

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, SLAYR said:

I have had this issue happen if your overclock is too high and the bios will try to find a stable setting. 

 

Try clearing cmos as well, that usually fixes a lot.

As far as I can tell my OC is rock solid - I've had it run AIDA 64 for nine hours two days in a row, 68C or so. This happened with my old CPU too though (had 6600k until two days ago).

 

I'll try clearing CMOS. :) 

CPU: i7 6700k (4.7 GHz) | GPU: EVGA GTX 1070 FTW (OC) | Motherboard: ASUS Sabertooth Z170 S | Cooling: Corsair H110i GTX | Storage: 250GB Samsung 850 EVO M.2 + 1TB WD Black | RAM: 16GB (2x8) Corsair Vengeance LED (White) 3000MHz | Case: Phanteks Enthoo Evolv ATX | PSU: Corsair RM850i | WiFi Card: TPLink Archer T9E | Case Fans: Noctua iPPC-2000 PWM (3x 120mm in), 2x Noctua NF-A14 PWM 140mm (radiator, painted black), Fractal Venturi HP-14 (1x 140mm out)  | OS: Windows 10 Home 64-bit

Link to comment
Share on other sites

Link to post
Share on other sites

for smart go to advanced > pch config

for ram it should be under  Ai Tweaker > disable mch full check (mine is set to auto tho)

Core i7 7700k Kabylake stock + Kraken x52 | ASUS Z170-A | 8GB DDR4 2133MHz HyperX | ASUS GeForce GTX 1060 STRIX 6GB | 250GB SSD Samsung 850 EVO + 2TB HDD WD RE4 | Seasonic X-Series 650w | Corsair 460x RGB  | Win 10 Pro 64 bit | Corsair M65 PRO RGB Mouse | Corsair K70 RGB RapidFire

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, xGGAx said:

for smart go to advanced > pch config

for ram it should be under  Ai Tweaker > disable mch full check (mine is set to auto tho)

Alright thanks. I'll check it out once I'm home from work ^_^

CPU: i7 6700k (4.7 GHz) | GPU: EVGA GTX 1070 FTW (OC) | Motherboard: ASUS Sabertooth Z170 S | Cooling: Corsair H110i GTX | Storage: 250GB Samsung 850 EVO M.2 + 1TB WD Black | RAM: 16GB (2x8) Corsair Vengeance LED (White) 3000MHz | Case: Phanteks Enthoo Evolv ATX | PSU: Corsair RM850i | WiFi Card: TPLink Archer T9E | Case Fans: Noctua iPPC-2000 PWM (3x 120mm in), 2x Noctua NF-A14 PWM 140mm (radiator, painted black), Fractal Venturi HP-14 (1x 140mm out)  | OS: Windows 10 Home 64-bit

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×