Infinite 2 second boot loop?

[The Salt Is REAL]

I tried OCing my RAM last night and now it's stuck in a boot loop. If I shut off the PSU for about a minute then power it on again, I get a screen saying "Overclock Failed! Press F1 to configure." Pressed F1 and got a missing operating system error. There's a solid red light next to the MemOK button if that helps. Thanks for the support.

[Orboe]

Can you get into bios?

[The Salt Is REAL]

1 minute ago, Orboe said:

Can you get into bios?

No unfortunately 

[Orboe]

2 minutes ago, Riki the Legendary Heropon said:

No unfortunately 

What did you do to try and overclock?

[The Salt Is REAL]

1 minute ago, Orboe said:

What did you do to try and overclock?

RAM frequency and latency

[NinjaJc01]

14 minutes ago, Riki the Legendary Heropon said:

RAM frequency and latency

Are you sure that you didn't kill your RAM? Try clearing your CMOS.

[Orboe]

Do you have a switch to use a backup bios on your board? You ram sounds damaged. 

 

[The Salt Is REAL]

2 minutes ago, NinjaJc01 said:

Are you sure that you didn't kill your RAM? Try clearing your CMOS.

I'm a bit hesitant of clearing the CMOS because I'm using the built-in RAID controller for a RAID 0 array

[The Salt Is REAL]

1 minute ago, Orboe said:

Do you have a switch to use a backup bios on your board? You ram sounds damaged. 

 

I have the Z97-A/USB 3.1, where would the switch be located?

 

[NinjaJc01]

1 minute ago, Riki the Legendary Heropon said:

I'm a bit hesitant of clearing the CMOS because I'm using the built-in RAID controller for a RAID 0 array

Ah yeah. I don't mess with RAID, so I can't help you there. Maybe swap your RAM to different slots?

[Simon771]

2 minutes ago, Riki the Legendary Heropon said:

I'm a bit hesitant of clearing the CMOS because I'm using the built-in RAID controller for a RAID 0 array

Do you have any other ram slots? Try to put those rams in differend slots, or remove one of the ram stick. It might confuse system a bit, to set ram to defult values.

Otherwise CMOS is the only solution, but as you said, that will be problem since you are using RAID conf.

[The Salt Is REAL]

Just tried the MemOK button again and I got an American Megatrends screen, I'll update if anything goes wrong. Thanks for all the help!

[The Salt Is REAL]

I got a missing operating system error again

[The Salt Is REAL]

Okay so I fixed the boot loop, had to flip an EZ_XMP switch but I'm still stuck on the "Missing operating system" error