im back this time with watercooling

[Adam7868]

so I'm back this time with watercooling and I'm still not getting the ful performance of my intel xeon E-3 1241V3 the pump is cranked to max and the cpu is the only thing in the loop. 

I have screenshots of the thermals and power consumption of the cpu also th stress test had been running for 22 mins

[FloRolf]

Sooooo you are complaining about it running too hot?

 

If so, then you probably have a bad Mount. let it run for an hour and see if the rad is getting hot.

[Adam7868]

the rad at the moment is boiling

 

[FloRolf]

1 minute ago, Adam7868 said:

the rad at the moment is boiling

 

That means there is a nice heat Transfer between CPU and Block. hows the airflow and what cooler/fans are you actually using in what case?

[Adam7868]

I'm using a 30 dollar case with minimal airflow

 

[Adam7868]

and using really cheap power supply fans

[Imakuni]

2 minutes ago, Adam7868 said:

I'm using a 30 dollar case with minimal airflow

Don't expect magic. No ariflow = no cooling. The radiator is just soaking heat, rather than dissipate it.

[Adam7868]

I'm gonna try a second power suppply

 

[Imakuni]

2 minutes ago, Adam7868 said:

I'm gonna try a second power suppply

[FloRolf]

3 minutes ago, Adam7868 said:

I'm gonna try a second power suppply

 

What do you expect from that? lol

 

can you post a pic of your PC?

[Adam7868]

sure

 

[Adam7868]

[Adam7868]

theres a custom radiator mount that I made  as well but that's pretty much it

 

[Adam7868]

by the way I'm using an asrock b85m pro4

[Imakuni]

4 minutes ago, Adam7868 said:

theres a custom radiator mount that I made  as well but that's pretty much it

 

Right... please show us that rad mount of yours.

[Adam7868]

its just a few holes  in the top of the case with spacers at the top

[Adam7868]

not shure you wil be able to see much

[Adam7868]

ive removed the fan to make it easier

[Speakerator]

2 minutes ago, Adam7868 said:

ive removed the fan to make it easier

Are you serious? I can't even.... You got to be trolling, right?

[Adam7868]

yeah well, you try washing dishes for money and being poor imo it works great also if you hadve read befor judging you would've seen that I mentioned that I had fans(in other words I'm not trolling)

[Speakerator]

Alright, in that case, run the radiator fans and the punp at max speed (connect them to 12V Molex directly or turn of any kind of fan control) and report back with the temps you found. While doing so, check the airflow through the radiator - with fans at max speed there should be a noticeable amount of warm air.

 

In addition, you might want to consider checking for a bad mount of your CPU block

 

 

[Imakuni]

2 hours ago, Adam7868 said:

yeah well, you try washing dishes for money and being poor imo it works great also if you hadve read befor judging you would've seen that I mentioned that I had fans(in other words I'm not trolling)

I'm sorry, but if you have a Xeon and a water cooler, you are NOT poor. Couple that with bad phrasing, as well as a mistake so basic that it's hard to believe someone would actually do it, and it becomes really difficult for us to think you aren't trolling.

 

But whatever. Put your radiator in place of that small fan in the first picture, rather than at the top. And show us a picture of how you did it, so we can make sure you did it right.