Can I control 4 3pin fans with this?

[KearneyMC]

On my motherboard atm I have 1 3pin fan connected to the 4pin fan header. I can control the RPM In my bios, I want to run all 4 fans all together and be able to change the rpm In the bios


I was thinking of getting this

 

https://www.amazon.co.uk/Phobya-3Pin-Molex-auf-60cm/dp/B00414ROKU?ie=UTF8&*Version*=1&*entries*=0

 

It seems to be a 3pin to a 4x 3pin, If I connected all of the fans to this would I be able to simultaneously control all the fans at once in the bios? 

[W-L]

7 minutes ago, KearneyMC said:

-SNIP-

Yes you can control 3 pin fans on a 4 pin header as long as you can setup that header to be DC voltage control, just note that a good rule of thumb is 3-4 fan max per header to not overload it's 1amp capacity.

[KearneyMC]

Just now, W-L said:

Yes you can control 3 pin fans on a 4 pin header as long as you can setup that header to be DC voltage control, just note that a good rule of thumb is 3-4 fan max per header to not overload it's 1amp capacity.

Im thinking of running near enough all fans at low RPM's Should that be OK with this splitter?

[W-L]

1 minute ago, KearneyMC said:

Im thinking of running near enough all fans at low RPM's Should that be OK with this splitter?

Yes that's no a problem for 3 pin fans as long as your not running something like delta fans  

[KearneyMC]

3 minutes ago, W-L said:

Yes you can control 3 pin fans on a 4 pin header as long as you can setup that header to be DC voltage control, just note that a good rule of thumb is 3-4 fan max per header to not overload it's 1amp capacity.

Right Cheers mate Always a good help