Motherboard dead ? Need Help !

[Maxido]

Hey guys,

i have got a big problem

Recently the BIOS of my brothers PC had been updated..but after it shut down to restart it was dead ^^

So I tried to figure out how to make it work again.

The biggest problem is that the pc is a constellation of Medion which means that I can't do anything.

I dont even hear a beep tone of the bios booting...

So I hope you could help me there.

Like I said before it's a Medion Pc with an intel core i5 4440,6Gb of DDR3 RAM and this unpopular Motherboard called ECS H81H3-EM2.

[Clanscorpia]

2 minutes ago, Maxido said:

Hey guys,

i have got a big problem

Recently the BIOS of my brothers PC had been updated..but after it shut down to restart it was dead ^^

So I tried to figure out how to make it work again.

The biggest problem is that the pc is a constellation of Medion which means that I can't do anything.

I dont even hear a beep tone of the bios booting...

So I hope you could help me there.

Like I said before it's a Medion Pc with an intel core i5 4440,6Gb of DDR3 RAM and this unpopular Motherboard called ECS H81H3-EM2.

Try flashing the old working BIOS

[Aytex]

Try different outlet?

Pull all the Powersupply cables and and reconnect them to make sure no pins are loose

[Maxido]

Just now, Clanscorpia said:

Try flashing the old working BIOS

If it would be that easy

Already tried it but didn't work because 1. i can't see anything ^^ and 2. it won't read usb.

But maybe I did it wrong.

So how do i do it ?

[Clanscorpia]

1 minute ago, Maxido said:

If it would be that easy

Already tried it but didn't work because 1. i can't see anything ^^ and 2. it won't read usb.

But maybe I did it wrong.

So how do i do it ?

Look it up on the manufacturer's website or check the manual

[Maxido]

Just now, Clanscorpia said:

Look it up on the manufacturer's website or check the manual

Manual doesn't even mention that point.Its bad quality i think.

[Maxido]

5 minutes ago, Aytex said:

Try different outlet?

Pull all the Powersupply cables and and reconnect them to make sure no pins are loose

Already tried  

[Clanscorpia]

Maybe you need to replace it with a new mobo then? I recommend the H81M-E34 if that's the case

 

[Maxido]

13 minutes ago, Clanscorpia said:

Maybe you need to replace it with a new mobo then? I recommend the H81M-E34 if that's the case

 

thats what i thought..