Issues with Hyperx Fury 2x4GB

[atled]

I just upgraded my set up from 4x2gb 1333 sticks to 2x4gb Kingston HyperX Fury 1600. 

 

Something very odd is happening though. Either stick will work on it's own in the A1 slot. They will work in A1 and A2 in single channel as well. In A1 and B1 (dual channel) they will not work. My computer gives an error code of 33 and then turns off, restarts, turns off, restarts, forever unless I turn it off myself. I've tried hitting my clear Cmos button as well but that does not work.

 

Any suggestions?

 

 

Computer

Case - NZXT Phantom Full Size

Motherboard - Asrock Z77 Extreme 4

CPU - i5-3570k OC'd to 4.4 GHz

CPU Cooler - Hyper 212 Evo

RAM - (2) 2gb G.Skill Ripjaws 1333 and (2) 2gb Patriot 1333   Trying to install 2x4gb Kingston HyperX Fury 1600

GPU - (2) 2gb EVGA 770 Superclocked SLI

HDD - WD 2tb Green and WD 500gb Blue

SSD - (2) 120gb Sandisk 

 

Monitors

Acer K272HUL - 27in, 1440p, 60hz

Random Dell - 23in, 1080p, 60hz

Random Acer - 23in, 1650x1050, 60hz

 

Peripherals

Mouse - Corsair Sabre RGB

Keyboard - Corsair K70

Headset - Logitech G35

[Aytex]

Are they the same voltage

[atled]

Just now, Aytex said:

Are they the same voltage

Yes. Same exact ram. Opened them from the package together like thirty minutes ago.

[Aytex]

Just now, atled said:

Yes. Same exact ram. Opened them from the package together like thirty minutes ago.

even the gskill/patriot?

 

[atled]

2 minutes ago, Aytex said:

even the gskill/patriot?

 

Sorry, I am trying to replace the gskill/patriot with just two sticks of Kingston.

[rheyL]

when the new rams installed, can you boot till bios?

if yes, you can check there maybe they have diff timings

if not

have you tried the other 2 dimm slots?

[atled]

On 4/6/2016 at 8:08 PM, rheyL said:

when the new rams installed, can you boot till bios?

if yes, you can check there maybe they have diff timings

if not

have you tried the other 2 dimm slots?

I cannot boot til bios unless I'm in single channel.

I have tried the other slots as well. A1 and A2 works. B1 and B2 works.

Currently I'm running in single channel A1 and A2 until I find a solution.