Jump to content

Should i use EQ

That doesn't answer my question in any way.

When you have all EQ off, the sound you perceive is the sound signature of your audio system (speakers and/or headphones), colored ever so slightly by the amplifier that delivers power to them. Whether that's the natural sound your ears will perceive in nature will depend on your equipment and even then it's up for discussion what sounds the most "natural."

EQ settings can sometimes distort by not correctly adjusting gains. Additionally some songs differ in their own volumes especially across different frequencies. If you're going to play with EQ settings, be conservative on how much you raise bands and drop gain to help offset the distortion.

Without the EQ you're just hearing plain old not-so-much-processed audio, it's not a difference of natural or not, the reproduction will be imperfect. So you're getting something non-natural from a non-natural source anyway.

Play around with it until it sounds how you like

Error: 410

Link to comment
https://linustechtips.com/topic/56076-should-i-use-eq/#findComment-756844
Share on other sites

Link to post
Share on other sites

it's entirely a preference thing.

 

they won't bring out more detail, but they can change how the system sounds

bass heavy, bass light, treble heavy etc.

 

it also depends on the system as to how much an eq will affect the sound.

the bass boost on my amp didn't do much at all for my HD595's but it's very noticeable with my shure srh840's

Will work for electronic components and parts


Reviews: Meelec CC51P - Monoprice 8323 - Koss Porta Pros  - Shure SRH-440 - Shure SRH-550DJShure SRH-840 - Hifiman He-500 - iBasso D4 - o2 Amplifier  -  SkeletonDac

Link to comment
https://linustechtips.com/topic/56076-should-i-use-eq/#findComment-756894
Share on other sites

Link to post
Share on other sites

it's entirely a preference thing.

 

they won't bring out more detail, but they can change how the system sounds

bass heavy, bass light, treble heave etc.

 

it also depends on the system as to how much an eq will affect the sound.

the bass boost on my amp didn't do much at all for my HD595's but it's very noticeable with my shure srh840's

So it's not like that " Our ear hears in orchestra bass more quite than other sounds and we should leave it that way" ? 

Also, does EQ hurts my Hardware? 

Link to comment
https://linustechtips.com/topic/56076-should-i-use-eq/#findComment-756925
Share on other sites

Link to post
Share on other sites

If you want to hear the bass tones more, turn up the low frequencies.

If you want to hear the mid tones more, turn up the mid frequencies.

If you want to hear the high tones more, turn up the high frequencies.

 

If you want a realistic sound, obviously adding any kind of effects via software will only distort the "real" sound 

the "real" sound being the sound with ZERO software alterations

"real" sounds can be bland, hollow, and boring, so equalization is added to provide depth and range to sounds that are "simple"

Link to comment
https://linustechtips.com/topic/56076-should-i-use-eq/#findComment-756983
Share on other sites

Link to post
Share on other sites

So there is no answer to my question.

Your question was answered within the first three posts of this thread.

 

So it's not like that " Our ear hears in orchestra bass more quite than other sounds and we should leave it that way" ? 

Also, does EQ hurts my Hardware?

EQ can only change the emphasis across frequency bands. If you wanted more bass out of the music you would raise and smooth out the lower frequency bands to blend the differences, then lower the gain to compensate.

 

EQ settings will not hurt your hardware unless you actually try to hurt it e.g. raising 50hz bands by, Idk 12dB, raising gain, and then trying to play it at full volume. If you're using a sound system you should be weary of amplifier distortion and bottoming out of the subwoofer.

 

If it's hurting your equipment, trust me you'll know, because it'll typically sound like ass.

Error: 410

Link to comment
https://linustechtips.com/topic/56076-should-i-use-eq/#findComment-756988
Share on other sites

Link to post
Share on other sites

So it's not like that " Our ear hears in orchestra bass more quite than other sounds and we should leave it that way" ? 

Also, does EQ hurts my Hardware? 

no, it's all preference.

 

for my home system I have a bass boost on my amp that I occasionally adjust, but don't touch anything else.

on my car systems, I adjust everything I can, to get what I want, as the systems in both my cars are pretty bad.

 

if you adjust it enough to drive it to clipping it can damage the speakers

and it depends on the system as to how much is too much.

Will work for electronic components and parts


Reviews: Meelec CC51P - Monoprice 8323 - Koss Porta Pros  - Shure SRH-440 - Shure SRH-550DJShure SRH-840 - Hifiman He-500 - iBasso D4 - o2 Amplifier  -  SkeletonDac

Link to comment
https://linustechtips.com/topic/56076-should-i-use-eq/#findComment-757055
Share on other sites

Link to post
Share on other sites

:rolleyes:

 

Headphones and speakers cannot reproduce sound perfectly. Equalizers were first made so that you could equalize the frequencies that are louder/quieter on any particular speaker so that you get a closer reproduction to a flat frequency curve - but it still isn't perfect. Now-a-days, EQ's are used to make the frequencies emphasize particular ranges based on personal preference.

Link to comment
https://linustechtips.com/topic/56076-should-i-use-eq/#findComment-757077
Share on other sites

Link to post
Share on other sites

no, it's all preference.

 

for my home system I have a bass boost on my amp that I occasionally adjust, but don't touch anything else.

on my car systems, I adjust everything I can, to get what I want, as the systems in both my cars are pretty bad.

 

if you adjust it enough to drive it to clipping it can damage the speakers

and it depends on the system as to how much is too much.

I'm curious, how did you test for clipping? I can't really set gains that well by ear with test tones, I tried a multimeter but it kept giving me some awkward numbers and I can't find an oscope.

Error: 410

Link to comment
https://linustechtips.com/topic/56076-should-i-use-eq/#findComment-757128
Share on other sites

Link to post
Share on other sites

:rolleyes:

 

Headphones and speakers cannot reproduce sound perfectly. Equalizers were first made so that you could equalize the frequencies that are louder/quieter on any particular speaker so that you get a closer reproduction to a flat frequency curve - but it still isn't perfect. Now-a-days, EQ's are used to make the frequencies emphasize particular ranges based on personal preference.

I think he has been given this answer now 10 different ways but still doesn't understand  :).

Putting effects onto audio isn't going to make it sound "more" natural. That's like taking a picture and adjusting the hue, saturation, contrast, etc to make it look more natural, it's a complete contradiction. 

Link to comment
https://linustechtips.com/topic/56076-should-i-use-eq/#findComment-757364
Share on other sites

Link to post
Share on other sites

I'm curious, how did you test for clipping? I can't really set gains that well by ear with test tones, I tried a multimeter but it kept giving me some awkward numbers and I can't find an oscope.

 

I don't test for it, but I try to push the eq down instead of up

Will work for electronic components and parts


Reviews: Meelec CC51P - Monoprice 8323 - Koss Porta Pros  - Shure SRH-440 - Shure SRH-550DJShure SRH-840 - Hifiman He-500 - iBasso D4 - o2 Amplifier  -  SkeletonDac

Link to comment
https://linustechtips.com/topic/56076-should-i-use-eq/#findComment-757772
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×