Phantek Entho Pro Best fan setup

[online_olympian]

Let me know what fan configuration you have in your Entho. I have a total of 3 140mm, 4 120mm, and 1 200, let me know what you think the best configuration would be for this case. Thanks!!

[EdInk]

2 x 140mm at the front...I experienced better air flow than the 200mm. 1x 140 at rear 3x 120mm at the top. The PSU shroud blocks a 120mm fan supports so you are left with 1x 120mm to install... I cut my shroud to allow both 120mm at the bottom.

 

I've got the enthoo Luxe

[SteveGrabowski0]

I think it's worth putting a 120mm on the hard drive cage too, as it brings gpu temps down a bit on my Enthoo Pro.

[online_olympian]

I currently have 2 120mm on the cage. really I had no problems at all until i went to a xeon with a 212 evo. my vidcard with my custom fan profile use to sit at 73-74 c no throttling but when i ditched the stock cooler on my i5 and went to the xeon with the 212 facing rearward i have been experiencing throttling on my card. the only thing I can think is the downward i5 fan was blowing on the back of the card. evga sc reference designed 780ti.

[online_olympian]

I am thinking about turning my evo facing down towards the rear of the vid card. I am not able to overclock the cpu and under full load it sits at 34-35c so I am not worried about the heat on the proc at all.