Jump to content

I know they are not common 3: But for fun, i wanted to build a list to see what I can come up with. Yes, they were partly inspired by the new fans from Noctua that are LTT designed. I am open to ideas. The Watercooling list is based off of orange tubs and parts from EKWB. Do you guys know any other orange/black parts that could go good with this build? 3:

 

 

http://pcpartpicker.com/p/2zv8NG

Moist

Link to comment
https://linustechtips.com/topic/471817-orange-and-black-build/
Share on other sites

Link to post
Share on other sites

I know they are not common 3: But for fun, i wanted to build a list to see what I can come up with. Yes, they were partly inspired by the new fans from Noctua that are LTT designed. I am open to ideas. The Watercooling list is based off of orange tubs and parts from EKWB. Do you guys know any other orange/black parts that could go good with this build? 3:

http://pcpartpicker.com/p/2zv8NG

You should change the RAM you have, 2 sticks that run at 1600 mhz paired with 2 sticks that run at 1866 mhz doesn't work well together.
Link to comment
https://linustechtips.com/topic/471817-orange-and-black-build/#findComment-6326161
Share on other sites

Link to post
Share on other sites

my build is white/black/orange =]post-257668-0-33798700-1445103090.jpg

 

BEAUTIFUL <3

where did you get those extensions and how did you get them looking so freaking GOOD

I ALSO WISH TO KNOW THIS, JESUS ITS AMAZING

 

 

 

You should change the RAM you have, 2 sticks that run at 1600 mhz paired with 2 sticks that run at 1866 mhz doesn't work well together.

Derp, didnt pay attention to that, my bad.

 

 

 

@Kenji the Uke nice build owo you may want to skylake though, at that budget.

Does skylake have orange motherboards already? 3:

Moist

Link to comment
https://linustechtips.com/topic/471817-orange-and-black-build/#findComment-6326346
Share on other sites

Link to post
Share on other sites

Corsair did some limited edition Dominator RAM that was orange, a while back. Unfortunately, that kit will now cost you a kidney on eBay.

OR. or... ;w; I could do black memory.. 

 

 

 

That was just one of them. Theres a couple on there but they are all from Asrock rn

I'm on their website. Most of their oranges are for AMD quadfire/Crossfire only.. No mention of SLI so far ;w;

Moist

Link to comment
https://linustechtips.com/topic/471817-orange-and-black-build/#findComment-6326427
Share on other sites

Link to post
Share on other sites

You could always go to X99, with a 5820k  and get the Gigabyte SOC board. :-)

 

Although, you're paying a premium for the MSI cards I linked, they sure are sexy.

 

.....thats what he has on there X'D

 

 

OR. or... ;w; I could do black memory.. 

 

 

 

I'm on their website. Most of their oranges are for AMD quadfire/Crossfire only.. No mention of SLI so far ;w;

 

Yah ive got no idea at all

Consume The Darkness

Link to comment
https://linustechtips.com/topic/471817-orange-and-black-build/#findComment-6326948
Share on other sites

Link to post
Share on other sites

You could always go to X99, with a 5820k  and get the Gigabyte SOC board. :-)

 

Although, you're paying a premium for the MSI cards I linked, they sure are sexy.

Their "Gold" edition xD I heard of it. Thats so orange, its beautiful. 

 

 

 

 

.....thats what he has on there X'D

 

 

 

Yah ive got no idea at all

 

;w; Yeah.. I mean the budget is still being saved up so who knows =w= Maybe someone will release more orange things.

Moist

Link to comment
https://linustechtips.com/topic/471817-orange-and-black-build/#findComment-6327009
Share on other sites

Link to post
Share on other sites

BEAUTIFUL <3

where did you get those extensions and how did you get them looking so freaking GOOD

check out http://www.ensourced.net/ they made my cables for me. also i have 3d printed cable clips the white lines you see on the cables holding them in the shape i want all together and then its just some creative routing in the back of the case to get it all were i wanted im honestly still not happy with it at all it drives me crazy.... im currently working on a diffrent psu shroud to replace that boring white temp fill in i have right now and im going to make some custom fan plates to cover all the fans showing on the inside that way the white light will shine through orange cover plates so i can add some more orange to the build

Link to comment
https://linustechtips.com/topic/471817-orange-and-black-build/#findComment-6327216
Share on other sites

Link to post
Share on other sites

http://pcpartpicker.com/part/asus-motherboard-sabertoothz170mark1

this is the motherboard id go with and just take the thermal armor off and paint it orange it will be sexy as fuck when its done

Oh my god yes. owo I can definitely do that. Fuck yeah =w=

Moist

Link to comment
https://linustechtips.com/topic/471817-orange-and-black-build/#findComment-6327317
Share on other sites

Link to post
Share on other sites

check out http://www.ensourced.net/ they made my cables for me. also i have 3d printed cable clips the white lines you see on the cables holding them in the shape i want all together and then its just some creative routing in the back of the case to get it all were i wanted im honestly still not happy with it at all it drives me crazy.... im currently working on a diffrent psu shroud to replace that boring white temp fill in i have right now and im going to make some custom fan plates to cover all the fans showing on the inside that way the white light will shine through orange cover plates so i can add some more orange to the build

3: Could you walk me through it? I am gonna use the currently listed PSU so what cable length's should i go with each cable connection type? 3:

Moist

Link to comment
https://linustechtips.com/topic/471817-orange-and-black-build/#findComment-6327367
Share on other sites

Link to post
Share on other sites

3: Could you walk me through it? I am gonna use the currently listed PSU so what cable length's should i go with each cable connection type? 3:

 

sweet same psu i have infact your whole computer is like almost a clone of mine =p

so just get the shortest custom cable extension length you dont need them to be very long mine were way longer than i thought they would be and i have them all stuffed in the back its a mess under that shroud. if you have any other question or need help just ask

Link to comment
https://linustechtips.com/topic/471817-orange-and-black-build/#findComment-6327413
Share on other sites

Link to post
Share on other sites

sweet same psu i have infact your whole computer is like almost a clone of mine =p

so just get the shortest custom cable extension length you dont need them to be very long mine were way longer than i thought they would be and i have them all stuffed in the back its a mess under that shroud. if you have any other question or need help just ask

We will certainly have to compare 3: I do plan on doing watercooling.. Though I dont know if I wanna.. Like.. I am definitely wanting to watercool the 2 GPU's with 360mm Rads in a custom loop, so orange and stuffs 3: But should I just say f**k it and go for gold with another 360mm rad and orange tubing that goes to a CPU block as well? 3: I was gonna cool the CPU too but only with an AIO because lazy..

Moist

Link to comment
https://linustechtips.com/topic/471817-orange-and-black-build/#findComment-6327437
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×