Jump to content

ive got a q6600 and i want to upgrade my cpu to a pentium q3258 or a amd fx6300 6 core it will be used for games like gta 5 i can already run it on my q6600 but lokking for a better cpu

Well a G3258 is technically a downgrade in some ways, and an FX6300 is a dead end. Why not an i3? Or a locked i5 4460?

Regardless you'll need a new motherboard (LGA1150 for Pentium or i3/i5, AM3+ for FX) and likely DDR3 RAM since most Q6600 boards were DDR2.

The New Machine: Intel 11700K / Strix Z590-A WIFI II / Patriot Viper Steel 4400MHz 2x8GB / Gigabyte RTX 3080 Gaming OC w/ Bykski WB / x4 1TB SSDs (x2 M.2, x2 2.5) / Corsair 5000D Airflow White / EVGA G6 1000W / Custom Loop CPU & GPU

 

The Rainbow X58: i7 975 Extreme Edition @4.2GHz, Asus Sabertooth X58, 6x2GB Mushkin Redline DDR3-1600 @2000MHz, SP 256GB Gen3 M.2 w/ Sabrent M.2 to PCI-E, Inno3D GTX 580 x2 SLI w/ Heatkiller waterblocks, Custom loop in NZXT Phantom White, Corsair XR7 360 rad hanging off the rear end, 360 slim rad up top. RGB everywhere.

Link to comment
https://linustechtips.com/topic/374204-q6600/#findComment-5061650
Share on other sites

Link to post
Share on other sites

Well a G3258 is technically a downgrade in some ways, and an FX6300 is a dead end. Why not an i3? Or a locked i5 4460?

Regardless you'll need a new motherboard (LGA1150 for Pentium or i3/i5, AM3+ for FX) and likely DDR3 RAM since most Q6600 boards were DDR2.

Some socket 775 boards ran on DDR3.

 

 

 

Link to comment
https://linustechtips.com/topic/374204-q6600/#findComment-5061675
Share on other sites

Link to post
Share on other sites

Some socket 775 boards ran on DDR3.

I'm aware of that, but the most common ones were DDR2 at that point and he didn't post his exact specs.

The New Machine: Intel 11700K / Strix Z590-A WIFI II / Patriot Viper Steel 4400MHz 2x8GB / Gigabyte RTX 3080 Gaming OC w/ Bykski WB / x4 1TB SSDs (x2 M.2, x2 2.5) / Corsair 5000D Airflow White / EVGA G6 1000W / Custom Loop CPU & GPU

 

The Rainbow X58: i7 975 Extreme Edition @4.2GHz, Asus Sabertooth X58, 6x2GB Mushkin Redline DDR3-1600 @2000MHz, SP 256GB Gen3 M.2 w/ Sabrent M.2 to PCI-E, Inno3D GTX 580 x2 SLI w/ Heatkiller waterblocks, Custom loop in NZXT Phantom White, Corsair XR7 360 rad hanging off the rear end, 360 slim rad up top. RGB everywhere.

Link to comment
https://linustechtips.com/topic/374204-q6600/#findComment-5061694
Share on other sites

Link to post
Share on other sites

An i3 would be your best bet. In games like gta v the 6300 would be a bit better (than an i3) however in other games there wouldn't be that much difference between an overclocked q6600 and an fx 6300 as the single threaded performance is rather similar. An i3 is much more balanced, gets better frames in most other titles, draws less power and has a much better upgrade path. I3 is the way to go.

Link to comment
https://linustechtips.com/topic/374204-q6600/#findComment-5061754
Share on other sites

Link to post
Share on other sites

tx for the help guys i forgot to mension i was going to overclock...

a core i3 is still much better than an overclocked pentium...and in most situations better than an overclocked AMD FX as well when it comes to gaming...it should be your CPU of choice IF you can't afford say an i5-44XX which would be another step above those.

| CPU: Core i7-8700K @ 4.89ghz - 1.21v  Motherboard: Asus ROG STRIX Z370-E GAMING  CPU Cooler: Corsair H100i V2 |
| GPU: MSI RTX 3080Ti Ventus 3X OC  RAM: 32GB T-Force Delta RGB 3066mhz |
| Displays: Acer Predator XB270HU 1440p Gsync 144hz IPS Gaming monitor | Oculus Quest 3 VR

Link to comment
https://linustechtips.com/topic/374204-q6600/#findComment-5110997
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×