Will these fit my case?

[Tim Drake]

I am either getting a H100 or a H110.

 

I was wondering if they both would fit (I pretty much 90% know the H100 will fit it's more if the H110 fits)

[ELSknutson]

From Aerocools website 

The Dead Silence is more flexible than it lets on when it comes to water-cooling support. As well as the rear fan mount naturally supporting all-in-one coolers like the Corsair H80i (or 140mm models like the NZXT Kraken X40), the front fan mount could easily hold a sizeable radiator providing you're willing to remove the HDD cage, which would give you a lot of depth to play with. If you removed the optical drive cage there would also be room for a 240mm radiator, though a bit of modding would be needed to mount it.

[Tim Drake]

From Aerocools website 

The Dead Silence is more flexible than it lets on when it comes to water-cooling support. As well as the rear fan mount naturally supporting all-in-one coolers like the Corsair H80i (or 140mm models like the NZXT Kraken X40), the front fan mount could easily hold a sizeable radiator providing you're willing to remove the HDD cage, which would give you a lot of depth to play with. If you removed the optical drive cage there would also be room for a 240mm radiator, though a bit of modding would be needed to mount it.

Aw shit, I forgot I can't fit the H110 D:

 

I will need to wait until I get a 350D then

[ELSknutson]

Aw shit, I forgot I can't fit the H110 D:

 

I will need to wait until I get a 350D then

You could get the new sexy H100 GTX

http://www.newegg.com/Product/Product.aspx?Item=N82E16835181090&cm_re=corsair_h100i_gtx-_-35-181-090-_-Product

[Tim Drake]

You could get the new sexy H100 GTX

http://www.newegg.com/Product/Product.aspx?Item=N82E16835181090&cm_re=corsair_h100i_gtx-_-35-181-090-_-Product

I could also actually afford some computer parts for the next 5 years lol.

 

So expensive.

[Tim Drake]

From Aerocools website 

The Dead Silence is more flexible than it lets on when it comes to water-cooling support. As well as the rear fan mount naturally supporting all-in-one coolers like the Corsair H80i (or 140mm models like the NZXT Kraken X40), the front fan mount could easily hold a sizeable radiator providing you're willing to remove the HDD cage, which would give you a lot of depth to play with. If you removed the optical drive cage there would also be room for a 240mm radiator, though a bit of modding would be needed to mount it.

"The dual 140mm/120mm roof mounts can also be used for water-cooling. The upper section of the chassis is so open that if you don't need the optical drive cage there's nothing stopping you from installing a full thickness 240mm or 280mm radiator with fans on both sides, although you might have to be careful if your graphics card is taller than usual. That said, if you're installing fans on top of the mounts, the front one is limited to 120mm only, as the protruding I/O panels prevent 140mm fans from fitting. Even so, there's enough flexibility inside the Dead Silence to install a decent loop."

 

-Source: http://www.bit-tech.net/hardware/cases/2013/12/30/aerocool-dead-silence-cube-review/2

 

EDIT: It also fits 2 x 140mm fans on top so what would be stopping it from fitting a 280mm radiator?