Ripjaws or Dominator?

[monkeys-fever]

Should i choose this G.skill Ripjaws

Series RipjawsX     Memory Type DDR3     Capacity 8GB (4GBx2)     Multi-Channel Kit Dual Channel Kit     Tested Speed 2133MHz     Tested Latency 9-11-11-31-2N     Tested Voltage 1.60v~1.65v     Registered/Unbuffered Unbuffered     Error Checking Non-ECC     SPD Speed 1600MHz     SPD Voltage 1.50v     Fan lncluded No     height 40 mm / 1.58 inch     Warranty Lifetime     Features Intel XMP (Extreme Memory Profile) Ready

 

 

Or

 

 

Dominator + Airflow

 

Size 8GB Kit (2 x 4GB)

Performance Profile XMP

Heat Spreader DHX+

Memory Configuration Dual Channel

Memory Type DDR3

Package - Memory Pin 240

Package - Memory Format DIMM

Tested Voltage 1.65

SPD Voltage 1.5

Speed Rating PC3-15000 (1866MHz)

SPD Speed 1333Mhz

Tested Speed 1866Mhz

Tested Latency 9-9-9-24

SPD Latency 9-9-9-24

 

 

my mother only support for 2000 OC

[H4X3R]

The cheapest DDR3 CL8/9 1600mhz you can find.

 

PS Corsair RAM has the highest failure rate and is very overpriced.

[ShadowCaptain]

i like vengeance pro, or dominator platinums

[Guest]

PS Corsair RAM has the highest failure rate

[Citation Needed]

[sirtoby]

Don't waste your money on dominator ram. Get the cheapest ram you can find in your desired speed.

[ErickS89]

I have the dominator plats and let me tell you, good ram but just had to call in warranty as 1 module died on me.. spent an entire weekend testing everything from HDDs, SSDs, my CPU as my system kept freezing! and tested very module and found every dimm slot works except 1 ram module "causes a 67 on my x79 extreme9 mobo or 60 if it's just that 1 module".

Not too mad, 56GB is still a lot of ram but might run only 32 gb until I get a replacement module from corsair.

I'm going with Vengeance pro or Ripjaw4s when I spend a fortune on 64gb of ddr4.

I'm also going to move my X79 rig to the asus ws-e mobo as I'm gonna use my current rig for game-capture and streaming. will probably throw a 780ti in there as it's cheap now.

[crystal6tak]

Go with whatever has the cheapest $ per GB. Unless if you have extra money to burn then get one that matches your build.

[Analog]

Unless you care about the "coolness factor" memory speed doesn't really matter in day-to-day tasks. Chose whatever fits your budget and you like more. Any 1600MHz or 1866MHz kit will be good enough, you won't see any performance benefit from going higher than that. 

[monkeys-fever]

between the two ram above, I prefer Dominator thats coming with airflow, but if I use Ripjaws that having a test speed of up to 2133MHz, does my motherboard that support only 2100MHz will support for it ??

[monkeys-fever]

Ok ..thats for all anwsers..i will choose the ripjaws

[soaringchicken]

Dominator Platinums are good, however are very expensive. It depends on how much you are willing to spend ^

[monkeys-fever]

Dominator Platinums are good, however are very expensive. It depends on how much you are willing to spend ^

i just only want to spend $115

[soaringchicken]

i just only want to spend $115

Than Ripjaws are probs the way to go, I have some in my system and I havn't had any problems

[mariohead123]

Get the cheapest/coolest looking, depending on what you want. Sometimes it's worth it to spend a few extra bucks because it can be the difference between a terrible looking system and a baller system

[Priller]

G. Skill makes very good ram.