Posted November 25, 2014 sry idk which forum was the right one im building my first pc, and idk what should i do with the cables.there are too much cables that i dont know how to connect pictures are addedfirst of all this is my mobo: http://postimg.org/image/9t7hf5z4f/ gigabyte z97 gaming 3 the first cables - the cpu cooler (h100I)where should i install them?http://postimg.org/image/804kqudxr/the next ones are the case ones (arc midi r2):where should i install them? http://postimg.org/image/rffcjy77z/ http://postimg.org/image/lfrlgamfj/ btw- can i use the spare fan (took it from the case top cuz i used the place for the pump) in here? http://postimg.org/image/5t4xgny1b/ the last ones are that ones: http://postimg.org/image/vneq6fy1b/ they comes from the top of the caseand another problem i got..i have a SEA-SONIC 850X psu, with a fan on top http://postimg.org/image/jrsg1n8jz/ the fan should be face to the top or bottom?1. everyone tells me bottom 2. the instructions warns about doing that: http://postimg.org/image/rlt1n1gcv/ look where im placing my finger thanks a lot ! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 25, 2014 what? Console alternatives by:Sauron http://linustechtips.com/main/topic/298009-console-alternatives-d-my-edition/#entry4045200 Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 25, 2014 Author what? what what? its a forum for asking questions about hardware isnt it? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 25, 2014 Psu facing with fan downwards Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 25, 2014 what what? its a forum for asking questions about hardware isnt it? yea it is just the post was confusing to me Console alternatives by:Sauron http://linustechtips.com/main/topic/298009-console-alternatives-d-my-edition/#entry4045200 Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 25, 2014 Author Psu facing with fan downwards Psu facing with fan downwards first of all thanks for the fast answer! im a bit confused.. the place u told me to put the H100I got 4 pins and the h100I just 3 holes.. and what is the top fan 1&2? got only 1..(actually its a back top fan) Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 25, 2014 first of all thanks for the fast answer! im a bit confused.. the place u told me to put the H100I got 4 pins and the h100I just 3 holes.. and what is the top fan 1&2? got only 1..(actually its a back top fan) Yeah its a bit confuseing with your amount of pics. Rear exhaust then goes to SysFan1. Casefans goes to sysfan headers. The connection with the h100 is fine. There is a notch on the connetor so it will only fit facing left from your ram slots. The fans on the radiator goes the 3pin connectors comming from the pump. While the usb 2 header from the pump goes to "usb panel" left hand side from the front i/o on the bottom of the board. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 25, 2014 Author Yeah its a bit confuseing with your amount of pics. Rear exhaust then goes to SysFan1. Casefans goes to sysfan headers. The connection with the h100 is fine. There is a notch on the connetor so it will only fit facing left from your ram slots. The fans on the radiator goes the 3pin connectors comming from the pump. While the usb 2 header from the pump goes to "usb panel" left hand side from the front i/o on the bottom of the board. oh lol sorry about that thanks a lot ! installed all the fans, but what usb are u talking about? (i guess its related to the pump but didnt get there yet) last things: the top cables from my case? how do i connect them to where? and what cables should be connected to the psu? (for motherboard, 1 gpu, ssd and hard drive and for the led of the cooling) thanks ! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 25, 2014 Here's the full circuit. Top cables from the case? I quess you mean the power button and such. Power button -> pw sw Reset button -> rw sw Power led -> pled +/pled- Hdd activity led -> hdd+/hdd- Front audio jack -> faudio or hdaudio or ac97 This is the usb cable from the pump. The right last cable coming with h100i For the gpu 2 pieces of 6+1 pcie connectors from the psu For hdd and ssd 2 pieces of s-ata power connectors Circuit Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 Author Here's the full circuit. Top cables from the case? I quess you mean the power button and such. Power button -> pw sw Reset button -> rw sw Power led -> pled +/pled- Hdd activity led -> hdd+/hdd- Front audio jack -> faudio or hdaudio or ac97 This is the usb cable from the pump. The right last cable coming with h100i For the gpu 2 pieces of 6+1 pcie connectors from the psu For hdd and ssd 2 pieces of s-ata power connectors Circuit i actually talked about those: http://postimg.org/image/vneq6fy1b/ i cant find a place to use them Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 This is the fancontroller from the case itself. You can leave them unused as its better to let your fans spin up from the mainboard software. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 Author This is the fancontroller from the case itself. You can leave them unused as its better to let your fans spin up from the mainboard software. and if i want them to be controlled from case is it hard to connect? i want all the buttons to work (idk why but thats important a bit to me) Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 You would use the big connector and connect it to the psu output and the 3 connectors would be connected to the fans instead of useing the sysfan connectors from the mainboard. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 Author You would use the big connector and connect it to the psu output and the 3 connectors would be connected to the fans instead of useing the sysfan connectors from the mainboard. perfect ! thanks, i connected all the cables, only got to connect the sata(or data idk the name) to the motherboard or psu and to the hard disks and the cooler and itll run( the pc) ? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 Just saying http://www.timeanddate.com/time/zones/cet Sorry but my alarm gets off at 5am. I need my sleep didn't expect this to take so long. But leaving a qualified nightowl to finish this @LarsReviews Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 perfect ! thanks, i connected all the cables, only got to connect the sata(or data idk the name) to the motherboard or psu and to the hard disks and the cooler and itll run( the pc) ? Yes, it should run then. Are there any cables left? For the sata, they only can go in one way, but sometimes it needs just a little bit of force. I had my PC not boot, because the Sata Power not plugged in all the way. Intel 4790k | Asus Z97 Maximus VII Impact | Corsair Vengeance Pro Series 16 GB 1866Mhz | Asus Strix GTX 980 | CoolerMaster G550 |Samsung Evo 250GB | Synology DS215j (NAS) | Logitech G502 | Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 Author Just saying http://www.timeanddate.com/time/zones/cet Sorry but my alarm gets off at 5am. I need my sleep didn't expect this to take so long. But leaving a qualified nightowl to finish this @LarsReviews thanks a lot for all ur help !! really appreciate it ! Yes, it should run then. Are there any cables left? For the sata, they only can go in one way, but sometimes it needs just a little bit of force. I had my PC not boot, because the Sata Power not plugged in all the way. there are like 20 cables left the motherboard place with the "sata express " and "sata 3" its empty, i got the cables but idk how and to where should i connect them, and i connected a sata cable (got 4 - longest one) from the psu to the hard drive, to the ssd , theres an unused one and then to the cpu cooler, is it ok? just looked good Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 thanks a lot for all ur help !! really appreciate it ! there are like 20 cables left the motherboard place with the "sata express " and "sata 3" its empty, i got the cables but idk how and to where should i connect them, and i connected a sata cable (got 4 - longest one) from the psu to the hard drive, to the ssd , theres an unused one and then to the cpu cooler, is it ok? just looked good Totally ok. You could even use a separate sata cable for each device. Is the pump and the cpu cooler fans running? Intel 4790k | Asus Z97 Maximus VII Impact | Corsair Vengeance Pro Series 16 GB 1866Mhz | Asus Strix GTX 980 | CoolerMaster G550 |Samsung Evo 250GB | Synology DS215j (NAS) | Logitech G502 | Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 Author Totally ok. You could even use a separate sata cable for each device. Is the pump and the cpu cooler fans running? idk, i didnt turn it on because the sata express got no cables in it and in every tutorial ive seen (of linus) he used sata cables ( and i got 4 - 2 types) how do i connect them? and ofc i need to connect the gpu but its easy as pie Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 idk, i didnt turn it on because the sata express got no cables in it and in every tutorial ive seen (of linus) he used sata cables ( and i got 4 - 2 types) how do i connect them? and ofc i need to connect the gpu but its easy as pie How many drives do you have? You don't need the sata express. It looks like you have a SSD and a HDD. For now, plug both Sata cables in, but only connect power to the SSD. After installing windows, turn the PC off and plug in sata power to the HDD. For the SSD you want to use Sata0 and for the HDD Sata 1. (The order doesn't matter, but I just do that so it is more organized if I ever need to troubleshoot. ) Intel 4790k | Asus Z97 Maximus VII Impact | Corsair Vengeance Pro Series 16 GB 1866Mhz | Asus Strix GTX 980 | CoolerMaster G550 |Samsung Evo 250GB | Synology DS215j (NAS) | Logitech G502 | Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 Author How many drives do you have? You don't need the sata express. It looks like you have a SSD and a HDD. For now, plug both Sata cables in, but only connect power to the SSD. After installing windows, turn the PC off and plug in sata power to the HDD. For the SSD you want to use Sata0 and for the HDD Sata 1. (The order doesn't matter, but I just do that so it is more organized if I ever need to troubleshoot. ) if i got u right- i connected to the sata 0 and 1 - 2 cables- 1 to the ssd (0) and one to the hdd (1) from the psu i connected 1 sata (with 2 plugs) one plug to the ssd and one plug to the hdd but only the ssd one is connected? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 if i got u right- i connected to the sata 0 and 1 - 2 cables- 1 to the ssd (0) and one to the hdd (1) from the psu i connected 1 sata (with 2 plugs) one plug to the ssd and one plug to the hdd but only the ssd one is connected? how does your sata cable look like This is Sata Express: Intel 4790k | Asus Z97 Maximus VII Impact | Corsair Vengeance Pro Series 16 GB 1866Mhz | Asus Strix GTX 980 | CoolerMaster G550 |Samsung Evo 250GB | Synology DS215j (NAS) | Logitech G502 | Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 Author how does your sata cable look like This is Sata Express: how does your sata cable look like This is Sata Express: like the red one Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 like the red one ok, that one is just called sata. The data cable can be plugged into the HDD, but the power cable for the HDD should not be plugged in. When installing windows, it can happen that some stuff is installed to the HDD. To prevent this, the HDD power is unplugged, so the windows installation can't right any data to it. After the installation is done and you where in windows for the first time, you can then plug in the HDD power. Just want to make sure that you use the SSD for Windows. If that is taken care of, you should be able to boot for the first time. Before installing windows, you should go into the bios and watch the temp for a view minutes also to check if the cooler is working. Intel 4790k | Asus Z97 Maximus VII Impact | Corsair Vengeance Pro Series 16 GB 1866Mhz | Asus Strix GTX 980 | CoolerMaster G550 |Samsung Evo 250GB | Synology DS215j (NAS) | Logitech G502 | Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted November 26, 2014 Author ok, that one is just called sata. The data cable can be plugged into the HDD, but the power cable for the HDD should not be plugged in. When installing windows, it can happen that some stuff is installed to the HDD. To prevent this, the HDD power is unplugged, so the windows installation can't right any data to it. After the installation is done and you where in windows for the first time, you can then plug in the HDD power. Just want to make sure that you use the SSD for Windows. data cable? u just typed wrong or am i missing a cable? and what is a power cable? like.. the sata cable from the psu? and why do i need the windows on ssd? i thought only for after effect adobe Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now