ram help

[1234516]

G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9D-8GBXM

• DDR3 2133 (PC3 17000)
• Timing 9-11-10-28
• Cas Latency 9
• Voltage 1.65V

 

G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-2133C10D-8GXM

• DDR3 2133 (PC3 17000)
• Timing 10-12-12-31
• Cas Latency 10
• Voltage 1.6V

help guys! one on top cost more by like $10 but cas is lower,timing is more tight. however voltage is more up. would there be much difference for the $10 for the top one? also would i need to oc my cpu a little for this to achieve 2133?

 

 

 

[LemonSpice]

 

G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9D-8GBXM

• DDR3 2133 (PC3 17000)
• Timing 9-11-10-28
• Cas Latency 9
• Voltage 1.65V

 

G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-2133C10D-8GXM

• DDR3 2133 (PC3 17000)
• Timing 10-12-12-31
• Cas Latency 10
• Voltage 1.6V

help guys! one on top cost more by like $10 but cas is lower,timing is more tight. however voltage is more up. would there be much difference for the $10 for the top one? also would i need to oc my cpu a little for this to achieve 2133?

 

 

 

high speed ram makes very little difference you will be fine either way

[LemonSpice]

 

G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9D-8GBXM

• DDR3 2133 (PC3 17000)
• Timing 9-11-10-28
• Cas Latency 9
• Voltage 1.65V

 

G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-2133C10D-8GXM

• DDR3 2133 (PC3 17000)
• Timing 10-12-12-31
• Cas Latency 10
• Voltage 1.6V

help guys! one on top cost more by like $10 but cas is lower,timing is more tight. however voltage is more up. would there be much difference for the $10 for the top one? also would i need to oc my cpu a little for this to achieve 2133?

 

 

 

and no you do not need to oc your cpu as that might actually o the opposite

[Rheinwasser]

no difference at all.

just get the cheapest ram that is visually pleasing to you.

[1234516]

@Rheinwasser

@JEman99

 

even if ram has higher voltage than standard 1.5v? so getting the cheaper one won't do me any bad.

do i need to set up xmp for this? being higher voltaged rams

[LemonSpice]

@Rheinwasser

@JEman99

 

even if ram has higher voltage than standard 1.5v? so getting the cheaper one won't do me any bad.

no 1 cas will not do really all that much

[Altecice]

Just dont forget to set your XMP profiles to get the RAM to 2133 (in the bios)

[1234516]

@JEman99

@Altecice

@Rheinwasser

 

thanks for the help guys, was confused because the top ram (1.65v) has 5 stars and 1.6v cheaper one by $10 has 4 stars but if you guys say it's not a problem then i'll take your word on it!