Jump to content

WATERCOOLED PC DESK MOD WITH CAR SOUND SYSTEM

imfaceroll

just amazing !

CPU: i7 4770k  Motherboard: MSI Z87-G43 SSD: ADATA 250GB PNY 120gb HDD:2xSeagate 2TB (One is an external HDD) GPU: RTX 2070 Super RAM: 16gb Corsair Vengeance 1600 PSU:Corsair CX-M600w Case: NZXT Phantom 410

Link to comment
Share on other sites

Link to post
Share on other sites

So, progress has been made with the desk.

 

A few days have past, i have my 24 hour leak test complete and so far no dramas. Next phase of the build is to put the three 27 inch monitors up on the monitor stand i purchased from USA.

I open the monitor stand box only to find that the wrong stand had been sent out to me. Instead of a free standing stand that i ordered, i received a stand with a clamp screw to hold the monitor mount onto the desk, which is a bit of a problem...

 

post-107908-0-09815900-1406865243.jpg

 

The clamp cannot open wide enough to fit the thickness of my desk due to the desk being a hollow box roughly 200mm thick. Thoughts....

I came up with a solution that only Albert Einstein himself would think of, okay that's a lie it didn't take much to come up with the idea.
I had to create a wooden stand that the monitor mounting stand could clamp onto and the stand had to screw into the back section of the desk, pretty simple...

Went to Bunnings warehouse and scored myself three 1m lengths of wood for free (who would have thought..).
I cut each length down to 800x150mm and cut a small piece to screw on top of the three side pieces. This top piece acted as the base for which the monitor mount would clamp on to.

 

post-107908-0-63606000-1406865275.jpg

 

post-107908-0-89579100-1406865285.jpg

 

By creating the stand it also relieves the desk of all weight and prevents any possible bowing of the wood. The stand turned out well as you can see.
I covered it in some left over carbon fibre wrap and now i can attach all three of my monitors and run either a nvidia surround setup or run with the 3 seperate screens with the two gtx 780 ti GPU's in SLI mode.
Also by having only the 3 sides and an open back it acts as a place to hide cables which makes everything look neater and well managed.

 

post-107908-0-99747700-1406865307.jpg

 

My desk is up and running now so updates will be posted very shortly within the next few days.

Again, please help me out by liking my Facebook page, subscribe to my YouTube where i will be posting regular videos of game footage and desk mods. It would really help me out, i appreciate the support Cheers.

YouTube: https://www.youtube.com/user/ImfacerollPCGaming
Facebook: https://www.facebook.com/Imfacerollgaming

 

Link to comment
Share on other sites

Link to post
Share on other sites

Yes it's pretty .

But you can game on it? 

All these LEDs seems distracting and isn't it too high for comfort?

|CPU: Intel core i5 3570k @ 4.5GHZ |Motherboard: Asus Z77 -V lx2 Full atx |RAM:Kingston HyperX Fury 2x8GB DDR3 1866MHz |GPU: 2 X ASUS AMD Radeon HD7850 2gb Crossfire |Case: Corsair Carbide 300r |Storage: Western Digital Caviar Black 2tb2 Samsung 840 120gb ssd raid 0 |PSU: Seasonic 750w 80+ PSU |Display: lg 32" 1080p 60Hz |Cooling: Noctua NH-D14 + 4Noctua NF-P14 scythe Kaze Q-12 Fan Controller |Keyboard: SideWinder X6 |Mouse: Razer DeathAdder 2013 |

Link to comment
Share on other sites

Link to post
Share on other sites

this is truly epic 

My Setup :P

Spoiler

Skylake: I7-6700|MSI B150 GAMING M3|16GB GSKILL RIPJAWS V|R9 280X (WILL BE 1070)|CRUCIAL MX300 + WD BLACK 1TB

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Yes it's pretty .

But you can game on it?

All these LEDs seems distracting and isn't it too high for comfort?

I made a video answering all of these questions check it out at www.youtube.com/user/imfacerollpcgaming

I wouldnt spend all this money on something that doesnt function properly haha =)

Link to comment
Share on other sites

Link to post
Share on other sites

I made a video answering all of these questions check it out at www.youtube.com/user/imfacerollpcgaming

I wouldnt spend all this money on something that doesnt function properly haha =)

i cant imagine those speakers will do the hdd's much good. also how come you have water cooled the hdd's but not the ram?

Rig Specs:

AMD Threadripper 5990WX@4.8Ghz

Asus Zenith III Extreme

Asrock OC Formula 7970XTX Quadfire

G.Skill Ripheartout X OC 7000Mhz C28 DDR5 4X16GB  

Super Flower Power Leadex 2000W Psu's X2

Harrynowl's 775/771 OC and mod guide: http://linustechtips.com/main/topic/232325-lga775-core2duo-core2quad-overclocking-guide/ http://linustechtips.com/main/topic/365998-mod-lga771-to-lga775-cpu-modification-tutorial/

ProKoN haswell/DC OC guide: http://linustechtips.com/main/topic/41234-intel-haswell-4670k-4770k-overclocking-guide/

 

"desperate for just a bit more money to watercool, the titan x would be thankful" Carter -2016

Link to comment
Share on other sites

Link to post
Share on other sites

i cant imagine those speakers will do the hdd's much good. also how come you have water cooled the hdd's but not the ram?

the ram I have does not have a dedicated waterblock so I am unable to. Cooling the HDD'S is for asthetics. The RAM is right next to an intake fan so it is getting cold air blown onto it anyway
Link to comment
Share on other sites

Link to post
Share on other sites

the ram I have does not have a dedicated waterblock so I am unable to. Cooling the HDD'S is for asthetics. The RAM is right next to an intake fan so it is getting cold air blown onto it anyway

ram doesn't need cooling at all. the heat spreaders are pointless. i didn't realise you cant get blocks for dom plats as loads of people use them. 

Rig Specs:

AMD Threadripper 5990WX@4.8Ghz

Asus Zenith III Extreme

Asrock OC Formula 7970XTX Quadfire

G.Skill Ripheartout X OC 7000Mhz C28 DDR5 4X16GB  

Super Flower Power Leadex 2000W Psu's X2

Harrynowl's 775/771 OC and mod guide: http://linustechtips.com/main/topic/232325-lga775-core2duo-core2quad-overclocking-guide/ http://linustechtips.com/main/topic/365998-mod-lga771-to-lga775-cpu-modification-tutorial/

ProKoN haswell/DC OC guide: http://linustechtips.com/main/topic/41234-intel-haswell-4670k-4770k-overclocking-guide/

 

"desperate for just a bit more money to watercool, the titan x would be thankful" Carter -2016

Link to comment
Share on other sites

Link to post
Share on other sites

ram doesn't need cooling at all. the heat spreaders are pointless. i didn't realise you cant get blocks for dom plats as loads of people use them.

hdd's do need waterblocks though -__- :P

My Build log of the Satan's Cave PC Desk Project is starting to get in action! Come check it out if you feel like it  :) 

Link to comment
Share on other sites

Link to post
Share on other sites

After the major accident involving the leakage on the motherboard i finally got to refill the desk. The liquid coolant i am using is distilled water with some mayhems UV green dye. Please enjoy.
 
Please visit my facebook page to see more photos at a higher quality and chuck me a like, it would really help me out. 
 
 
This is the distilled water i picked up from Big W. I had a fair amount of trouble trying to find distilled water because most places were either sold out or only had deionized/demineralised water.
 
post-107908-0-07418500-1407745537_thumb.
 
When filling the loop i always had some cloth/towels near by incase of a possible spill/leak.
 
post-107908-0-13123800-1407745691.jpg
 
I used a funnel with a drink bottle to fill the loop. It made the process much faster and easier which saved a lot of time.
 
post-107908-0-98793700-1407745744.jpg
 
post-107908-0-63927900-1407745757_thumb.
 

I made sure the pump always had water in it so that it would never run dry. By letting the pump run dry you can ruin it.
 
post-107908-0-98985300-1407745801_thumb.
 
post-107908-0-26511200-1407745811.jpg
 
I started adding the Mayhems UV green dye to the distilled water one drop at a time until i achieved the look i was after.
 
post-107908-0-56639100-1407745871.jpg
 
post-107908-0-79213900-1407745883.jpg
 
post-107908-0-04132100-1407745895.jpg
 
The loop was filled so i had to start leak testing for 24 hours. Always make sure to put some cloth/towels/paper towel to prevent possible fluid leaks from getting onto components.
 
post-107908-0-82521700-1407745988.jpg
 
post-107908-0-85611900-1407745997.jpg
 
post-107908-0-34128400-1407746013_thumb.
 
post-107908-0-68459800-1407746044.jpg
 
I always checked how the leak test was going every so often..

 

post-107908-0-45344800-1407746087.jpg

 

Here are a few images after the leak test

 

post-107908-0-31490600-1407746129.jpg

 

post-107908-0-88364600-1407746141.jpg

 

post-107908-0-00378600-1407746156.jpg

 

post-107908-0-53732100-1407746166.jpg

 

post-107908-0-45415600-1407746176_thumb.

 

post-107908-0-61357600-1407746186_thumb.

 

post-107908-0-68486400-1407746195.jpg

 

Please visit my facebook page to see more photos at a higher quality and chuck me a like, it would really help me out. 

https://www.facebook.com/Imfacerollgaming

Also visit my YouTube channel where i will be posting three new Desk mod videos and help me out by subscribing. Thank you =)

https://www.youtube.com/user/ImfacerollPCGaming

More progress/final photos shortly, Thanks

post-107908-0-07418500-1407745537_thumb.

post-107908-0-13123800-1407745691.jpg

post-107908-0-98793700-1407745744.jpg

post-107908-0-63927900-1407745757_thumb.

post-107908-0-98985300-1407745801_thumb.

post-107908-0-26511200-1407745811.jpg

post-107908-0-56639100-1407745871.jpg

post-107908-0-79213900-1407745883.jpg

post-107908-0-04132100-1407745895.jpg

post-107908-0-82521700-1407745988.jpg

post-107908-0-85611900-1407745997.jpg

post-107908-0-34128400-1407746013_thumb.

post-107908-0-68459800-1407746044.jpg

post-107908-0-45344800-1407746087.jpg

post-107908-0-31490600-1407746129.jpg

post-107908-0-88364600-1407746141.jpg

post-107908-0-00378600-1407746156.jpg

post-107908-0-53732100-1407746166.jpg

post-107908-0-45415600-1407746176_thumb.

post-107908-0-61357600-1407746186_thumb.

post-107908-0-68486400-1407746195.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

You look fairly young in those pictures. Where did you get 22k from on that age?? :P

Anyways your build looks just awesome! Can't wait to start my pc desk build

My Build log of the Satan's Cave PC Desk Project is starting to get in action! Come check it out if you feel like it  :) 

Link to comment
Share on other sites

Link to post
Share on other sites

You look fairly young in those pictures. Where did you get 22k from on that age?? :P

Anyways your build looks just awesome! Can't wait to start my pc desk build

Well im guessing australia and that uniform

so i would assume mining? or heavy equipment

Link to comment
Share on other sites

Link to post
Share on other sites

Well im guessing australia and that uniform

so i would assume mining? or heavy equipment

I am an engineering surveyor and I am around earth moving gear and I am in the quarries/mines all the time.

Link to comment
Share on other sites

Link to post
Share on other sites

You look fairly young in those pictures. Where did you get 22k from on that age?? :P

Anyways your build looks just awesome! Can't wait to start my pc desk build

Thanks mate. Im 21 on september 4th. I just save my money =)

Link to comment
Share on other sites

Link to post
Share on other sites

How do you power the stereo amplifer subwoofers and speakers?

Link to comment
Share on other sites

Link to post
Share on other sites

How do you power the stereo amplifer subwoofers and speakers?

psu

Link to comment
Share on other sites

Link to post
Share on other sites

So i have finally finished the desk and the leak testing is over. I plan to over clock the CPU and GPU but i will do that at a later date and share the results with you guys. The x99 series motherboards, DDR4 RAM and new GPU's are coming out so i am most likely going to upgrade the desk when these items are out on the market. Here are some final photos, please enjoy and remember you can watch my full build log series at:
 
www.youtube.com/user/imfacerollpcgaming
 
and you can view more photos of the desk build, my upcoming cabinet build and some awesome modifications at my facebook page:
 
www.facebook.com/imfacerollgaming
 
please enjoy.
 
post-107908-0-51352900-1408668644.jpg
 
post-107908-0-30347400-1408668649.jpg
 
post-107908-0-37568700-1408668658.jpg
 
post-107908-0-76883100-1408668665.jpg
 
post-107908-0-99400200-1408668672_thumb.
 
post-107908-0-01740900-1408668681_thumb.
 
post-107908-0-03761500-1408668687.jpg
 
post-107908-0-69211600-1408668695.jpg
 
post-107908-0-64334900-1408668701.jpg
 
post-107908-0-26824100-1408668709.jpg
 
post-107908-0-02229900-1408668858.jpg
 
post-107908-0-79760300-1408668867.jpg
 
post-107908-0-55622900-1408668873.jpg
 
post-107908-0-71035600-1408668880.jpg
 
post-107908-0-14945100-1408668887.jpg
 
post-107908-0-09792900-1408668895.jpg
 
post-107908-0-17462900-1408668899.jpg
 
post-107908-0-47223700-1408668903_thumb.
 
post-107908-0-59151700-1408668908.jpg
 
post-107908-0-12114800-1408668913.jpg
 
post-107908-0-08929300-1408669030.jpg
 
post-107908-0-79468200-1408669039.jpg
 
post-107908-0-60081400-1408669044.jpg
 
post-107908-0-18698400-1408669050.jpg
 
post-107908-0-52423000-1408669055.jpg
 
post-107908-0-73978900-1408669059.jpg
 
post-107908-0-18843300-1408669064.jpg
 
post-107908-0-02843900-1408669069.jpg
 
post-107908-0-52213200-1408669073.jpg
 
post-107908-0-34485400-1408669081.jpg
 
post-107908-0-85191600-1408669132_thumb.
 
 
That is my water cooled PC desk modification with built in car audio system, Please note the audio system works well but there are obviously better audio systems out there, the car audio was used purely so do something different, to save room and because the green and black suits the theme.

 
Once again please show your support by checking out my youtube and facebook page for more photos/build log videos and game footage.
I am about to start my liquid cooled PC cabinet mod which will be a red and black theme so check out my pages to follow that build which is being sponsored, Cheers.
 
 

post-107908-0-51352900-1408668644.jpg

post-107908-0-30347400-1408668649.jpg

post-107908-0-37568700-1408668658.jpg

post-107908-0-76883100-1408668665.jpg

post-107908-0-99400200-1408668672_thumb.

post-107908-0-01740900-1408668681_thumb.

post-107908-0-03761500-1408668687.jpg

post-107908-0-69211600-1408668695.jpg

post-107908-0-64334900-1408668701.jpg

post-107908-0-26824100-1408668709.jpg

post-107908-0-02229900-1408668858.jpg

post-107908-0-79760300-1408668867.jpg

post-107908-0-55622900-1408668873.jpg

post-107908-0-71035600-1408668880.jpg

post-107908-0-14945100-1408668887.jpg

post-107908-0-09792900-1408668895.jpg

post-107908-0-17462900-1408668899.jpg

post-107908-0-47223700-1408668903_thumb.

post-107908-0-59151700-1408668908.jpg

post-107908-0-12114800-1408668913.jpg

post-107908-0-08929300-1408669030.jpg

post-107908-0-79468200-1408669039.jpg

post-107908-0-60081400-1408669044.jpg

post-107908-0-18698400-1408669050.jpg

post-107908-0-52423000-1408669055.jpg

post-107908-0-73978900-1408669059.jpg

post-107908-0-18843300-1408669064.jpg

post-107908-0-02843900-1408669069.jpg

post-107908-0-52213200-1408669073.jpg

post-107908-0-34485400-1408669081.jpg

post-107908-0-85191600-1408669132_thumb.

Link to comment
Share on other sites

Link to post
Share on other sites

I've seen better.

 

 

 

 

 

 

 

 

 

 

 

Just kidding this is beast.

Link to comment
Share on other sites

Link to post
Share on other sites

i dont know if its been mentioned but what screens are you using ive been looking for 27's with basicly no bezel

Link to comment
Share on other sites

Link to post
Share on other sites

Nice desk. :P

System 1: Thermaltake Element Q - Thermaltake 220W SFX - Asus AT5IONT-I mini-ITX - Intel® Atom™ D525 onboard 1.8GHz Dual-Core HT - Integrated NVIDIA® ION™ - 2x 2GB Kingston DDR3 - Samsung 120GB 840 Series - Scythe Kama Rack 3.5 - Asus DVD-RW

System 2: Thermaltake Element Q - Thermaltake 220W SFX - Asus E2KM1I-DELUXE mini-ITX - AMD E2-2000 onboard 1.75GHz Dual-Core - Integrated AMD® Radeon HD 7340 - 2x 4GB Kingston DDR3 - Samsung 120GB 840 Series - Scythe Kama Rack 3.5 - Asus DVD-RW

Building: Bitfenix Prodigy Black - Corsair AX860i - Asus Maximus VII Impact - Corsair Hydro Series H100i - Intel® Core™ i7 4790K - Asus Matrix Platinum GTX 980 4GB - Corsair 16GB Dominator Platinum 2x 8GB DDR3 2400MHz CL10 - Samsung 1TB EVO 840 Series

Link to comment
Share on other sites

Link to post
Share on other sites

AAAH DEFQON CD'S :D :D

btw the desk is kinda nice too

 

 

 

i said kinda? i meant freaking awesome

My Build log of the Satan's Cave PC Desk Project is starting to get in action! Come check it out if you feel like it  :) 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×