Jump to content

Long Screwdriver for installing a Peerless Assassin 120, which length and head ?

PDifolco
By PDifolco
in Cooling
 Share
Posted

I'm wanting to test a Peerless Assassin 120 cooler, will replace the meh fans with a couple Arctic P12 Pros 🙂

I'd then check if I can have same perf than a 280mm watercooling with reservoir, and it should be close !

 

Yet while I have a lot of PC tools (ifixit set) aI have no long screwdriver for installing this cooler, and there's none as accessory like Noctua does..

So what length and head do I need ? 

System : AMD R9  7950X3D CPU/ Asus ROG STRIX X670E-E board/ 2x32GB G-Skill Trident Z Neo 6000CL30 RAM / ASUS TUF Gaming AMD Radeon RX 7900 XTX OC Edition GPU/ Phanteks P600S case /  Thermalright Peerless Assassin 120 cooler (with 2xArctic P12 Max fans) /  2TB WD SN850 NVme + 2TB Crucial T500  NVme  + 4TB Toshiba X300 HDD / Corsair RM850x PSU

Alienware AW3420DW 34" 120Hz 3440x1440p monitor / Logitech G915TKL keyboard (wireless) / Logitech G PRO X Superlight mouse / Audeze Maxwell headphones

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
4 minutes ago, PDifolco said:

I'm wanting to test a Peerless Assassin 120 cooler, will replace the meh fans with a couple Arctic P12 Pros 🙂

I'd then check if I can have same perf than a 280mm watercooling with reservoir, and it should be close !

 

Yet while I have a lot of PC tools (ifixit set) aI have no long screwdriver for installing this cooler, and there's none as accessory like Noctua does..

So what length and head do I need ? 

Very sure its four headed as seen on the official product page for the cooler and you would need a fairly long screwdriver (all lengths are in mm)

image.png.22dc26a59d81f63118d8e6f36bac27a6.png

image.thumb.png.dd2b2a1f35f94e1557fffa9fa3dae154.png

Message me on discord (bread8669) for more help 

 

Current parts list: 

CPU: R5 5600 CPU Cooler: Stock

Mobo: Asrock B550M-ITX/ac

RAM: Vengeance LPX 2x8GB 3200mhz Cl16

SSD: P5 Plus 500GB Secondary SSD: Kingston A400 960GB

GPU: MSI RTX 3060 Gaming X

Fans: 1x Noctua NF-P12 Redux, 1x Arctic P12, 1x Corsair LL120

PSU: NZXT SP-650M SFX-L PSU from H1

Monitor: Samsung WQHD 34 inch and 43 inch TV

Mouse: Logitech G203

Keyboard: Rii membrane keyboard

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

Damn this space can fit a 4090 (just kidding)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, filpo said:

its four headed

Phillips. 
Probably a number 1 or number 2. 
 

If @PDifolcohas a Noctua screwdriver it should work just fine. 

I'm not actually trying to be as grumpy as it seems.

I will find your mentions of Ikea or Gnome and I will /s post. 

Project Hot Box

CPU 13900k, Motherboard Gigabyte Aorus Elite AX, RAM CORSAIR Vengeance 4x16gb 5200 MHZ, GPU Zotac RTX 4090 Trinity OC, Case Fractal Pop Air XL, Storage Sabrent Rocket Q4 2tb, CORSAIR Force Series MP510 1920GB NVMe, CORSAIR FORCE Series MP510 960GB NVMe, PSU CORSAIR HX1000i, Cooling Corsair XC8 CPU block, Bykski GPU block, 360mm and 280mm radiator, Displays Odyssey G9, LG 34UC98-W 34-Inch,Keyboard Mountain Everest Max, Mouse Mountain Makalu 67, Sound AT2035, Massdrop 6xx headphones, Go XLR 

Oppbevaring

CPU i9-9900k, Motherboard, ASUS Rog Maximus Code XI, RAM, 48GB Corsair Vengeance LPX 32GB 3200 mhz (2x16)+(2x8) GPUs Asus ROG Strix 2070 8gb, PNY 1080, Nvidia 1080, Case Mining Frame, 2x Storage Samsung 860 Evo 500 GB, PSU Corsair RM1000x and RM850x, Cooling Asus Rog Ryuo 240 with Noctua NF-12 fans

 

Why is the 5800x so hot?

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
10 minutes ago, IkeaGnome said:

Phillips. 
Probably a number 1 or number 2. 
 

If @PDifolcohas a Noctua screwdriver it should work just fine. 

ye ofc I don't know the name

Message me on discord (bread8669) for more help 

 

Current parts list: 

CPU: R5 5600 CPU Cooler: Stock

Mobo: Asrock B550M-ITX/ac

RAM: Vengeance LPX 2x8GB 3200mhz Cl16

SSD: P5 Plus 500GB Secondary SSD: Kingston A400 960GB

GPU: MSI RTX 3060 Gaming X

Fans: 1x Noctua NF-P12 Redux, 1x Arctic P12, 1x Corsair LL120

PSU: NZXT SP-650M SFX-L PSU from H1

Monitor: Samsung WQHD 34 inch and 43 inch TV

Mouse: Logitech G203

Keyboard: Rii membrane keyboard

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

Damn this space can fit a 4090 (just kidding)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
10 minutes ago, IkeaGnome said:

Phillips. 
Probably a number 1 or number 2. 
 

If @PDifolcohas a Noctua screwdriver it should work just fine. 

Yep I know it's a Phillips not sure Nr1 or 2, and what "blade" length  I need

Noctuas is PH2 but I don't have one, will maybe just buy it

 

System : AMD R9  7950X3D CPU/ Asus ROG STRIX X670E-E board/ 2x32GB G-Skill Trident Z Neo 6000CL30 RAM / ASUS TUF Gaming AMD Radeon RX 7900 XTX OC Edition GPU/ Phanteks P600S case /  Thermalright Peerless Assassin 120 cooler (with 2xArctic P12 Max fans) /  2TB WD SN850 NVme + 2TB Crucial T500  NVme  + 4TB Toshiba X300 HDD / Corsair RM850x PSU

Alienware AW3420DW 34" 120Hz 3440x1440p monitor / Logitech G915TKL keyboard (wireless) / Logitech G PRO X Superlight mouse / Audeze Maxwell headphones

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

You shouldn't need anything special, you are not going into the fin stack like on something like Le Grand Macho RT. I am using my Thermalright screwdriver 😄

AMD R7 5800X3D | Thermalright Aqua Elite 360, 3x TL-B12, 2x TL-K12
Asus Crosshair VIII Dark Hero | 32GB G.Skill Trident Z @ 3733C14 1.5v
Zotac 4070 Ti Trinity OC @ 3045/1495 | WD SN8501TB, SN850X2TB
Seasonic Vertex GX-1000 | Fractal Torrent Compact, 2x TL-B14, TL-D14X

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×