Stencils

[TheNinjaNextDor]

I'm completely done with my build... so now I'm making PSU plates and wanting to get some stencils made to put the name of it on my side panel. Where can I get some?

 

Thanks!

[AlwaysFSX]

And metal working place that has a plasma/water cutting machine? Might be able to get custom things done.

[Scheer]

Print the design onto card stock and cut it out with an Xacto knife.

 

Buy them online: http://www.customcutstencil.com/custom-stencils?gclid=CO2X9oK-l74CFePm7AodyBYAQA

 

Have a local hobby shop cut them for you? Find a scrapbook club/someone with a cricut machine.

[W-L]

If you decide to make your own stencil highly suggest using contact paper or stick on stencils since they prevent over-spray or bleeding under the stencils. 

 

 

This isn't exactly intended for the job but works regardless: http://www.homedepot.com/p/Con-Tact-Creative-Covering-18-in-x-75-ft-White-Multipurpose-Shelf-Liner-1-Roll-75F-C9955-01/202499918

[TheNinjaNextDor]

Print the design onto card stock and cut it out with an Xacto knife.

Buy them online: http://www.customcutstencil.com/custom-stencils?gclid=CO2X9oK-l74CFePm7AodyBYAQA

Have a local hobby shop cut them for you? Find a scrapbook club/someone with a cricut machine.

If you decide to make your own stencil highly suggest using contact paper or stick on stencils since they prevent over-spray or bleeding under the stencils.

This isn't exactly intended for the job but works regardless: http://www.homedepot.com/p/Con-Tact-Creative-Covering-18-in-x-75-ft-White-Multipurpose-Shelf-Liner-1-Roll-75F-C9955-01/202499918

Yeah, I'll probably make my own. Thanks!