Jump to content

Window tilling feature using in ubuntu

Go to solution Solved by The Hope,

You are using Gnome. That's a standard desktop that isn't specifically aimed at auto-tiling windows.

You can install some tiling window managers with the following command

sudo apt-get install i3 dwm spectrwm stumpwm awesome

 

xmonad is also top notch, but you need to understand Haskell if you want to use it.

Okay so i thought of using a window tilling software in my laptop that i am using ubuntu as the os and the pop shell came the best option on my search results but there is some issues that i am finding while using it and thoght this subreddit would be the place to find some solutions. granted that i am only using it for like 3-4 hours so educate me if i am missing to adjust some setting or anything.

issues -1. while opening a new window when two windows are already opeened it always readjust the current window that i am working on. Can i adjust it so that it readjust the newly opened window with the other window that i have

2. if open more that three windows then it readjusts all the windows but then after i minimize a window it doesn't go back to the original state.

Link to comment
https://linustechtips.com/topic/1484424-window-tilling-feature-using-in-ubuntu/
Share on other sites

Link to post
Share on other sites

1 hour ago, Souranil21 chakraborty said:

Okay so i thought of using a window tilling software in my laptop that i am using ubuntu as the os and the pop shell came the best option on my search results but there is some issues that i am finding while using it and thoght this subreddit would be the place to find some solutions. granted that i am only using it for like 3-4 hours so educate me if i am missing to adjust some setting or anything.

issues -1. while opening a new window when two windows are already opeened it always readjust the current window that i am working on. Can i adjust it so that it readjust the newly opened window with the other window that i have

2. if open more that three windows then it readjusts all the windows but then after i minimize a window it doesn't go back to the original state.

1.  A forum not a subreddit

2. tilling is turning over soil to mix the soil up for farming.  Perhaps you mean tiling.

Not a pro, not even very good.  I’m just old and have time currently.  Assuming I know a lot about computers can be a mistake.

 

Life is like a bowl of chocolates: there are all these little crinkly paper cups everywhere.

Link to post
Share on other sites

If one tiling Window Manager is not to you liking, try another.

The best tiling window managers for Linux, and what they can do for you --
https://www.zdnet.com/article/the-best-tiling-window-managers-for-linux-and-what-they-can-do-for-you/
Link to post
Share on other sites

  • 3 weeks later...
On 1/28/2023 at 1:17 AM, Souranil21 chakraborty said:

Okay so i thought of using a window tilling software in my laptop that i am using ubuntu as the os and the pop shell came the best option on my search results but there is some issues that i am finding while using it and thoght this subreddit would be the place to find some solutions. granted that i am only using it for like 3-4 hours so educate me if i am missing to adjust some setting or anything.

issues -1. while opening a new window when two windows are already opeened it always readjust the current window that i am working on. Can i adjust it so that it readjust the newly opened window with the other window that i have

2. if open more that three windows then it readjusts all the windows but then after i minimize a window it doesn't go back to the original state.

If you have 2 windows open (programs running), and you open a 3rd window (launch another program) it will resize one of the windows to fit the 3rd.  Usually the right side if I'm not mistaken.  If you open a 4th program/window, it believe it will move the 2nd window which was on the right, to the lower left side.  Almost the order in which you opened each.  

I think if you minimize a window, that might be the reason why it's acting goofy.  I think with a tiling window manager, the expectation is if you're not using a program, you should close it, not minimize it.  Part of the problem might be that some programs like Spotify or Discord, minimize to tray rather than completely terminate when.  If you check their settings there might be a option to just terminate the program rather than minimize to tray.  

Good call on Pop Shell.  However, since you currently boot Ubuntu, it might be best to install Pop_OS since that comes with Pop Shell.  It's "ubuntu based" like so many other distros and the Pop Shop let's you install apps in either Flatpaks or Deb formats.  

That being said, I currently have Nobara on my desktop which is Fedora based.  I tried Qtile but, prefer Pop Shell.  It doesn't work perfectly since I'm using Nobara which it is not designed to work with.  However, it works well enough since Ubuntu, Pop and Fedora all use GNOME.  

RTX 3080Ti Ryzen 5 3600 MSI Gaming Edge WiFi 32Gb DDR4 3600 

Link to post
Share on other sites

On 2/14/2023 at 3:00 AM, Guidosaurus-Rex said:

If you have 2 windows open (programs running), and you open a 3rd window (launch another program) it will resize one of the windows to fit the 3rd.  Usually the right side if I'm not mistaken.  If you open a 4th program/window, it believe it will move the 2nd window which was on the right, to the lower left side.  Almost the order in which you opened each.  

I think if you minimize a window, that might be the reason why it's acting goofy.  I think with a tiling window manager, the expectation is if you're not using a program, you should close it, not minimize it.  Part of the problem might be that some programs like Spotify or Discord, minimize to tray rather than completely terminate when.  If you check their settings there might be a option to just terminate the program rather than minimize to tray.  

Good call on Pop Shell.  However, since you currently boot Ubuntu, it might be best to install Pop_OS since that comes with Pop Shell.  It's "ubuntu based" like so many other distros and the Pop Shop let's you install apps in either Flatpaks or Deb formats.  

That being said, I currently have Nobara on my desktop which is Fedora based.  I tried Qtile but, prefer Pop Shell.  It doesn't work perfectly since I'm using Nobara which it is not designed to work with.  However, it works well enough since Ubuntu, Pop and Fedora all use GNOME.  

yeah i was previously using pop os but now i can't cause i have to dual boot with windows 11 but other than ubuntu and fedora not many distros support secure boot and pop from my knowledge doesn't support secure boot

 

Link to post
Share on other sites

You are using Gnome. That's a standard desktop that isn't specifically aimed at auto-tiling windows.

You can install some tiling window managers with the following command

sudo apt-get install i3 dwm spectrwm stumpwm awesome

 

xmonad is also top notch, but you need to understand Haskell if you want to use it.

OS: OpenBSD -current WM: Polybar -- bspwm -- dmenu -- picom Components: Intel 12700KF -- G.SKILL RIPJAWS @4000 CL18 -- ASUS Dual Radeon RX 9060 XT 16GB -- ASUS ROG STRIX B760-G GAMING WIFI D4 -- JONSBO Z20 black -- ARCTIC F14 -- bequiet! SYSTEM POWER 10 550W -- DeepCool AG500BK -- Kingston Renegade G5 1TB and Samsung 9100 PRO 1TB Mouse: zalman ZM-GM7 Display panel: UltraGear 34G630A-B Headphones: Kawai SH-9 Webcam: Microsoft LifeCam HD-3000 Keyboard: HP desktop 320K Microphone: Trust GXT 259 RUDOX Camera: Fujifilm X-M5

Link to post
Share on other sites

  • 2 weeks later...
On 2/19/2023 at 10:36 AM, The Hope said:

You are using Gnome. That's a standard desktop that isn't specifically aimed at auto-tiling windows.

You can install some tiling window managers with the following command

sudo apt-get install i3 dwm spectrwm stumpwm awesome

 

xmonad is also top notch, but you need to understand Haskell if you want to use it.

Don't forget about SWAY.  Personally, the other options you listed are a little advanced for my taste.  You gotta be a real keyboard warrior to take full advantage.  Pop_Os implementation is very simple.  Open a new window and it tiles it evenly for you.  Open another then you get the master & stack layout.  Of course your suggestions offer many, many more options than those.  Especially if you have multiple monitors, etc etc.  Distrotube has a whole series on Tiling Window Managers as well as some how to guides.  

 

If you need a "comprehensive" guide to use a window manager I think form no longer fits the function.  

That's why "Pop Shell" from Pop_OS serves me well on Nobara and Fedora.  

 

has  

RTX 3080Ti Ryzen 5 3600 MSI Gaming Edge WiFi 32Gb DDR4 3600 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×