Stupid simple drive mount question

[Bigun]

What are these called?  Looking to buy a few.  They go into 2.5" drives and go into my case and holds the drive in place.

 

 

[BiotechBen]

Ssd screw, SSD standoff, dive mount screw, m3/m4 screw.

[Bigun]

1 minute ago, BiotechBen said:

Ssd screw, SSD standoff, dive mount screw, m3/m4 screw.

None of those, standoffs go into the board and assist with mounting the motherboard typically.  This is almost like a plain post and it goes into a rubber grommet in the case.

[NF-A12x25]

18 minutes ago, Bigun said:

What are these called?  Looking to buy a few.  They go into 2.5" drives and go into my case and holds the drive in place.

 

 

Those specifically are Cooler Master SSD screws, they come with cooler master cases like my SL600M. Couldn’t find any on ebay.

 

How many do you need? I may be able to find some.

[Bigun]

1 minute ago, NF-A12x25 said:

Those specifically are Cooler Master SSD screws, they come with cooler master cases like my SL600M. Couldn’t find any on ebay.

 

How many do you need? I may be able to find some.

Like maybe 5.  If these aren't sold anywhere, tempted to draft a design in CAD.  But yes, it's a Cooler Master case.

[NF-A12x25]

4 minutes ago, Bigun said:

Like maybe 5.  If these aren't sold anywhere, tempted to draft a design in CAD.  But yes, it's a Cooler Master case.

well if you don’t find any in a week, message me- I MAY be able to find some extra ones from my SL600m. They’re somewhere in my basement back home (i’m at college for a few more days)

 

Edit: gimme a minute I think i found them on cooler master’s website

[NF-A12x25]

https://www.cmstore.eu/spare-parts/mastercase-h500m-toolbox/

 

Found them on the EU store as part of the accessories kit that came with the h500m, but they’re not on the US store at all. 

[-rascal-]

They look like thumbscrews....

Are they threaded or unthreaded?

 

I'm wondering if CoolerMaster will just send you a bag of them or something...

[NF-A12x25]

4 minutes ago, -rascal- said:

They look like thumbscrews....

Are they threaded or unthreaded?

 

I'm wondering if CoolerMaster will just send you a bag of them or something...

they are threaded thumbscrew posts that friction-fit into the case’s rubber grommets, and they might send a bag if OP emails them. That said, i also found an STL from someone who got frustrated trying to find one and just 3d printed them 

 

https://www.thingiverse.com/thing:5136270

[-rascal-]

3 minutes ago, NF-A12x25 said:

they are threaded thumbscrew posts that friction-fit into the case’s rubber grommets, and they might send a bag if OP emails them. That said, i also found an STL from someone who got frustrated trying to find one and just 3d printed them 

 

https://www.thingiverse.com/thing:5136270

 

The TD500 is a fairly new case.

I'm assuming CoolerMaster would still stock those SSD screws as spare parts....

[NF-A12x25]

2 minutes ago, -rascal- said:

I'm assuming CoolerMaster would still stock those SSD screws as spare parts....

i’m sure they do, they still use the screws in brand-new cases

 

however they don’t have em on the website, gotta email em to find out i guess

[Bigun]

55 minutes ago, NF-A12x25 said:

they are threaded thumbscrew posts that friction-fit into the case’s rubber grommets, and they might send a bag if OP emails them. That said, i also found an STL from someone who got frustrated trying to find one and just 3d printed them 

 

https://www.thingiverse.com/thing:5136270

I got a few 3d printers, this should work.

[tkitch]

I'd just contact CM Suport now that you know exactly what it is from their site, and they'll probably mail it to you

 

[Bigun]

On 12/9/2022 at 7:23 PM, Bigun said:

I got a few 3d printers, this should work.

I just printed the parts out, and it didn't fit, I'll try contacting support.