Jump to content

Windows 11 Update Error On Unsupported Hardware

WildFoxy100
By WildFoxy100
in Troubleshooting
 Share
Posted

I was updating my AIO pc to windows 11 which meets all requirements except for the CPU one. It failed saying 'The Installation Failed In The SAFE_OS Phase With An Error During Boot Operation'. I found the setuperr.log:

 

2022-12-02 23:33:00, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!RemoveObsoleteCHSHKLMRegkey - fail to open regkey (software\Microsoft\CTF\TIP\{E429B25A-E5D3-4D1F-9BE3-0C608477E3A1}\LanguageProfile\0x00000804) = 2
2022-12-02 23:33:00, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!ApplySuccess() remove HKLM Registries error
2022-12-02 23:33:00, Error      [0x0808fe] MIG    Plugin {B17742DB-956A-48FC-B9B2-E25E41496ECD}: MupMigPlugin: ApplyNetworkProviderOrderData failed with error: 0x80070002
2022-12-02 23:33:00, Error      [0x08038d] MIG    Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath="%SYSTEM32%\migration\MupMigPlugin.dll", CLSID={B17742DB-956A-48FC-B9B2-E25E41496ECD}, ThreadingModel=Apartment}. Error: 0x80070002
2022-12-02 23:33:00, Error                 SP     Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,C:\$Windows.~BT\Work\MachineSpecific\Working\agentmgr\CCSIAgent,%SYSTEM32%\migration\MupMigPlugin.dll,{B17742DB-956A-48FC-B9B2-E25E41496ECD},Apartment. Will return 2[gle=0x000000cb]
2022-12-02 23:33:01, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: ParseRegistryIfBridgeExists: offline key (new) = 'System\Setup\Upgrade\Bridge'
2022-12-02 23:33:01, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: ParseRegistryIfBridgeExists: query bridge presence key failed 0x139f, bridge present = 0
2022-12-02 23:42:56, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] internal\onecoreuapshell\private\inc\UserChoiceHelpers.h(811)\shmig.dll!00007FFA3242AF41: (caller: 00007FFA3242B6A9) LogHr(1) tid(698) 80070002 The system cannot find the file specified.

2022-12-02 23:42:56, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] internal\onecoreuapshell\private\inc\UserChoiceHelpers.h(812)\shmig.dll!00007FFA3242AF7B: (caller: 00007FFA3242B6A9) LogHr(2) tid(698) 80070002 The system cannot find the file specified.

2022-12-02 23:42:56, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] internal\onecoreuapshell\private\inc\UserChoiceHelpers.h(813)\shmig.dll!00007FFA3242AFA5: (caller: 00007FFA3242B6A9) LogHr(3) tid(698) 80070002 The system cannot find the file specified.

2022-12-02 23:43:19, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!RemoveObsoleteCHSHKLMRegkey - fail to open regkey (software\Microsoft\CTF\TIP\{E429B25A-E5D3-4D1F-9BE3-0C608477E3A1}\LanguageProfile\0x00000804) = 2
2022-12-02 23:43:19, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!ApplySuccess() remove HKLM Registries error
2022-12-02 23:47:48, Error                        SppDeleteSnapshots failed. hr = 0x800401f0
 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
7 minutes ago, Ali1076 said:

I was updating my AIO pc to windows 11 which meets all requirements except for the CPU one. It failed saying 'The Installation Failed In The SAFE_OS Phase With An Error During Boot Operation'. I found the setuperr.log:

 

2022-12-02 23:33:00, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!RemoveObsoleteCHSHKLMRegkey - fail to open regkey (software\Microsoft\CTF\TIP\{E429B25A-E5D3-4D1F-9BE3-0C608477E3A1}\LanguageProfile\0x00000804) = 2
2022-12-02 23:33:00, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!ApplySuccess() remove HKLM Registries error
2022-12-02 23:33:00, Error      [0x0808fe] MIG    Plugin {B17742DB-956A-48FC-B9B2-E25E41496ECD}: MupMigPlugin: ApplyNetworkProviderOrderData failed with error: 0x80070002
2022-12-02 23:33:00, Error      [0x08038d] MIG    Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath="%SYSTEM32%\migration\MupMigPlugin.dll", CLSID={B17742DB-956A-48FC-B9B2-E25E41496ECD}, ThreadingModel=Apartment}. Error: 0x80070002
2022-12-02 23:33:00, Error                 SP     Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,C:\$Windows.~BT\Work\MachineSpecific\Working\agentmgr\CCSIAgent,%SYSTEM32%\migration\MupMigPlugin.dll,{B17742DB-956A-48FC-B9B2-E25E41496ECD},Apartment. Will return 2[gle=0x000000cb]
2022-12-02 23:33:01, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: ParseRegistryIfBridgeExists: offline key (new) = 'System\Setup\Upgrade\Bridge'
2022-12-02 23:33:01, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: ParseRegistryIfBridgeExists: query bridge presence key failed 0x139f, bridge present = 0
2022-12-02 23:42:56, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] internal\onecoreuapshell\private\inc\UserChoiceHelpers.h(811)\shmig.dll!00007FFA3242AF41: (caller: 00007FFA3242B6A9) LogHr(1) tid(698) 80070002 The system cannot find the file specified.

2022-12-02 23:42:56, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] internal\onecoreuapshell\private\inc\UserChoiceHelpers.h(812)\shmig.dll!00007FFA3242AF7B: (caller: 00007FFA3242B6A9) LogHr(2) tid(698) 80070002 The system cannot find the file specified.

2022-12-02 23:42:56, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] internal\onecoreuapshell\private\inc\UserChoiceHelpers.h(813)\shmig.dll!00007FFA3242AFA5: (caller: 00007FFA3242B6A9) LogHr(3) tid(698) 80070002 The system cannot find the file specified.

2022-12-02 23:43:19, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!RemoveObsoleteCHSHKLMRegkey - fail to open regkey (software\Microsoft\CTF\TIP\{E429B25A-E5D3-4D1F-9BE3-0C608477E3A1}\LanguageProfile\0x00000804) = 2
2022-12-02 23:43:19, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!ApplySuccess() remove HKLM Registries error
2022-12-02 23:47:48, Error                        SppDeleteSnapshots failed. hr = 0x800401f0
 

 

If it's not supported, why install it anyway?

There are workarounds to installing Windows 11 on unsupported hardware but it's at your own risk of course.

Just stick to Windows 10 and once it's end of life your hardware will probably be replaced anyway.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Naijin said:

If it's not supported, why install it anyway?

There are workarounds to installing Windows 11 on unsupported hardware but it's at your own risk of course.

Just stick to Windows 10 and once it's end of life your hardware will probably be replaced anyway.

I want to install it, can you explain what's wrong from the error log?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
6 minutes ago, Ali1076 said:

I want to install it, can you explain what's wrong from the error log?

It's not supported. That's why it's throwing this SAFE_OS message during attempt to upgrade.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Its not supported so its goin in error telling you its not supported.

 

Rufus can remove all of this and burn an iso to a usb from there it should instal fine.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, jaslion said:

Its not supported so its goin in error telling you its not supported.

 

Rufus can remove all of this and burn an iso to a usb from there it should instal fine.

I tried rufus but it just shows windows 11 logo, waits a second. repeats.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Ali1076 said:

I tried rufus but it just shows windows 11 logo, waits a second. repeats.

What aio is it?

 

What are your system specs?

 

Keep in mind that this is NOT a guaranteed thing at all. If it wont work it simply wont work

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, jaslion said:

What aio is it?

 

What are your system specs?

 

Keep in mind that this is NOT a guaranteed thing at all. If it wont work it simply wont work

This is what I get: it comes for a second, blanks and repeats. It's Ideacentre AIO 520-24AST

20221205_164203.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
7 minutes ago, Ali1076 said:

This is what I get: it comes for a second, blanks and repeats. It's Ideacentre AIO 520-24AST

20221205_164203.jpg

Oh its an amd a series piledriver  jaguar mobile chip.

 

Yup wont work ever. Those flat out just dont work on 11 no matter what. Has something to do with a bios feature missing have a couple of those systems come in and refuse 11 with tpm check dissabled too. Strangely enough fm2 and fx work most of thr time

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
59 minutes ago, Grand Admiral Thrawn said:

Download 22H2 ISO, mount it and run setup.exe.

It allows to upgrade without losing anything.

He already did the equivalent of that. Here's the original topic.

 

M.S.C.E. (M.Sc. Computer Engineering), IT specialist in a hospital, 30+ years of gaming, 20+ years of computer enthusiasm, Geek, Trekkie, anime fan

  • Main PC: AMD Ryzen 7 5800X3D - EK AIO 360 D-RGB - Arctic Cooling MX-4 - Asus Prime X570-P - 4x8GB DDR4 3200 HyperX Fury CL16 - Sapphire AMD Radeon 6950XT Nitro+ - 1TB Kingston Fury Renegade - 2TB Kingston Fury Renegade - 512GB ADATA SU800 - 960GB Kingston A400 - Seasonic PX-850 850W  - custom black ATX and EPS cables - Fractal Design Define R5 Blackout - Windows 11 x64 23H2 - 3 Arctic Cooling P14 PWM PST - 5 Arctic Cooling P12 PWM PST
  • Peripherals: LG 32GK650F - Dell P2319h - Logitech G Pro X Superlight with Tiger Ice - HyperX Alloy Origins Core (TKL) - EndGame Gear MPC890 - Genius HF 1250B - Akliam PD4 - Sennheiser HD 560s - Simgot EM6L - Truthear Zero - QKZ x HBB - 7Hz Salnotes Zero - Logitech C270 - Behringer PS400 - BM700  - Colormunki Smile - Speedlink Torid - Jysk Stenderup - LG 24x External DVD writer - Konig smart card reader
  • Laptop: Acer E5–575G-386R 15.6" 1080p (i3 6100U + 12GB DDR4 (4GB+8GB) + GeForce 940MX + 256GB nVME) Win 10 Pro x64 22H2 - Logitech G305 + AAA Lithium battery
  • Networking: Asus TUF Gaming AX6000 - Arcadyan ISP router - 35/5 Mbps vDSL
  • TV and gadgets: TCL 50EP680 50" 4K LED + Sharp HT-SB100 75W RMS soundbar - Samsung Galaxy Tab A8 10.1" - OnePlus 9 256GB - Olymous Cameda C-160 - GameBoy Color 
  • Streaming/Server/Storage PC: AMD Ryzen 5 3600 - LC-Power LC-CC-120 - MSI B450 Tomahawk Max - 2x4GB ADATA 2666 DDR4 - 120GB Kingston V300 - Toshiba DT01ACA100 1TB - Toshiba DT01ACA200 2TB - 2x WD Green 2TB - Sapphire Pulse AMD Radeon R9 380X - 550W EVGA G3 SuperNova - Chieftec Giga DF-01B - White Shark Spartan X keyboard - Roccat Kone Pure Military Desert strike - Logitech S-220 - Philips 226L
  • Livingroom PC (dad uses): AMD FX 8300 - Arctic Freezer 64 - Asus M5A97 R2.0 Evo - 2x4GB DDR3 1833 Kingston - MSI Radeon HD 7770 1GB OC - 120GB Adata SSD - 500W Fractal Design Essence - DVD-RW - Samsung SM 2253BW - Logitech G710+ - wireless vertical mouse - MS 2.0 speakers
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 hours ago, Grand Admiral Thrawn said:

Download 22H2 ISO, mount it and run setup.exe.

It allows to upgrade without losing anything.

I will try that. I have high hopes it works.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, 191x7 said:

He already did the equivalent of that. Here's the original topic.

 

Thanks for the help! I will try that method too.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
On 12/5/2022 at 4:50 PM, Grand Admiral Thrawn said:

Download 22H2 ISO, mount it and run setup.exe.

It allows to upgrade without losing anything.

It says installation failed during safe os phase during boot process

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
19 hours ago, Grand Admiral Thrawn said:

Extract and run this: https://www.glenn.delahoy.com/downloads/sdio/SDIO_1.12.9.749.zip

Check the boxes and install all the drivers (you can leave the GPU one unchecked if you fancy).

Then try again with the ISO.

 

I tried the driver updater you mentioned. It updated some drivers. I tried again with windows 10 iso but I got this. The device went through the whole process and when I logged in this came up:

image.png.2136b36c18ce0e2ed775591da923c7ce.png

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×