Is bending my 24pin like this, ok?

[IamRizzky]

My PSU is the Corsair CX550m

And I bent my 24pin cable like this. it does turn on but is it ok?

[Windows7ge]

That's more than fine. I've done much worse bends myself. So long as it isn't pressing on the RAM you're fine.

 

I will mention though that it looks as though the plastic retention clip hasn't engaged the connector yet though. I'd see if I could give it a wiggle and get the clip to seat properly.

[OU812]

I have done worse, that's fine.

[Harvestman]

As others have said, I've had much stankier kinks in my 24 pin cables. It can be extremely difficult to route those cleanly, you're fine.

[Gorgon]

1 hour ago, IamRizzky said:

My PSU is the Corsair CX550m

And I bent my 24pin cable like this. it does turn on but is it ok? ...

Your 24-pin looks fine (and will be OK once you fully seat it).

 

I'd give a little more slack on the USB 3 cable bedside it so it's not leaning as much towards the front of the case. Those are much more sensitive and the motherboard connector prone to breaking.

[Guest]

Don't worry until terminals start popping out.  You're fine.

 

[Gorgon]

15 hours ago, jonnyGURU said:

Don't worry until terminals start popping out.  You're fine.

God has spoken and his words are wise.