Can't decide between these two models

[Insomniazz]

Currently using a thermal take v21 and was thinking on replacing the front 200mm stock fan with two 140mm noctua fans I just can't figure out what the best ones to go with would be. I have narrowed it down to these two. The redux is $13 cheaper per fan and I understand it doesn't come with accessories but performance wise how do they stack up.

 

https://www.amazon.ca/gp/aw/d/B00CP6QLY6/ref=ox_sc_act_image_4?smid=A1Z5H6ZGWCMTNX&psc=1

 

 

https://www.amazon.ca/gp/aw/d/B00KF7Q4WG/ref=ox_sc_act_image_2?smid=A1Z5H6ZGWCMTNX&psc=1

[TetraSky]

Why not replace it with a 200mm Noctua fan? It's what I did on my V21.

 

https://www.amazon.ca/dp/B07ZP46RNR
1 fan, pushes more air by itself due to its size and is thus quieter.

[Insomniazz]

2 minutes ago, TetraSky said:

Why not replace it with a 200mm Noctua fan? It's what I did on my V21.

 

https://www.amazon.ca/dp/B07ZP46RNR
1 fan, pushes more air by itself due to its size and is thus quieter.

Would this one be compatible with the hole spacing 

 

https://www.amazon.ca/Noctua-NF-A20-PWM-premium-quality-quiet/dp/B071SLFBNY/ref=mp_s_a_1_4?crid=3OOHL6YXSH537&keywords=200mm+noctua+fan&qid=1651013274&sprefix=200mm+no%2Caps%2C93&sr=8-4

[TetraSky]

1 minute ago, Insomniazz said:

Would this one be compatible with the hole spacing 

 

https://www.amazon.ca/Noctua-NF-A20-PWM-premium-quality-quiet/dp/B071SLFBNY/ref=mp_s_a_1_4?crid=3OOHL6YXSH537&keywords=200mm+noctua+fan&qid=1651013274&sprefix=200mm+no%2Caps%2C93&sr=8-4

It's what I literally have and it fits just fine in the front of my case.

[Insomniazz]

2 minutes ago, TetraSky said:

It's what I literally have and it fits just fine in the front of my case.

That looks sick!! What do you use for exhaust at the back of your case 120mm or 140mm

[TetraSky]

1 minute ago, Insomniazz said:

That looks sick!! What do you use for exhaust at the back of your case 120mm or 140mm

I believe it's 120mm. The bigger picture:

 

[Insomniazz]

1 minute ago, TetraSky said:

I believe it's 120mm. The bigger picture:

 

Nice that looks amazing I just ordered the nhd15. Ok I'm going to go with 200mm front tysm for the help and the pictures 

[TetraSky]

8 minutes ago, Insomniazz said:

Nice that looks amazing I just ordered the nhd15. Ok I'm going to go with 200mm front tysm for the help and the pictures 

np! here's a slightly better picture that shows a bit more of it. I personally put some noise dampening foam in the inside of my panels, to absorb the sound and noise a bit more (hence why it might be a bit different compared to you)
But as you can see, the 200mm fits just fine there. Just make sure the orientation is correct. If I remember correctly, it's not a "perfect square" so it only fits one way.

[Insomniazz]

32 minutes ago, TetraSky said:

np! here's a slightly better picture that shows a bit more of it. I personally put some noise dampening foam in the inside of my panels, to absorb the sound and noise a bit more (hence why it might be a bit different compared to you)
But as you can see, the 200mm fits just fine there. Just make sure the orientation is correct. If I remember correctly, it's not a "perfect square" so it only fits one way.

That looks sweet. I'm loving this case!!!