Jump to content

All games crash

MOD_Drummer

I need some help...I'm out of ideas. 

Specs:

Intel 11900k (yes I know)

G.SKILL Trident royal 4800(2x16 GB)

Samsung 980 NVMe

ASUS ROG Strix Gaming RTX 3090

ASUS ROG Maximus XIII Hero

Corsair HX1200 PSU

 

The issue:

I get every game so far freezes for about 5 seconds then crash to desktop. The time it takes is anywhere from 3 minutes to an hour. I get no errors, no pop-ups, no warnings or information in event viewer. I have stress tested my PC on time spy extreme and it won't crash. I have no clue why it crashes in actual gameplay.

 

Things I've tried:

XMP both on and off

CPU stock and overclocked

MSI afterburner tweaks both over and under 

Disabled all in game overlays

Safe mode DDU and reinstall

Flashed the newest bios on MOBO

Memtest86 pass multiple times

Reinstalled windows fresh

 

I'm out of ideas!20220103_072424.thumb.jpg.75154203861ced6ff0e7e492ac9fc331.jpg

 

Edited by MOD_Drummer
Fixed RAM typo and added pic for troubleshooting
Link to comment
Share on other sites

Link to post
Share on other sites

20 minutes ago, MOD_Drummer said:

I need some help...I'm out of ideas. 

Specs:

Intel 11900k (yes I know)

G.SKILL Trident royal 4800(3x16 GB)

Samsung 980 NVMe

ASUS ROG Strix Gaming RTX 3090

ASUS ROG Maximus XIII Hero

Corsair HX1200 PSU

 

The issue:

I get every game so far freezes for about 5 seconds then crash to desktop. The time it takes is anywhere from 3 minutes to an hour. I get no errors, no pop-ups, no warnings or information in event viewer. I have stress tested my PC on time spy extreme and it won't crash. I have no clue why it crashes in actual gameplay.

 

Things I've tried:

XMP both on and off

CPU stock and overclocked

MSI afterburner tweaks both over and under 

Disabled all in game overlays

Safe mode DDU and reinstall

Flashed the newest bios on MOBO

Memtest86 pass multiple times

Reinstalled windows fresh

 

I'm out of ideas!

 

 

 

Those were some good steps to try!

Here are a few more:

Does event viewer show anything in application logs?

Reset CMOS just in case there is a weird option set or the IC got corrupted.

Download crystal disk, does SMART info show anything drive related? Any reallocated sectors uncorrectable errors or anything?

 Then try a min config, power off the system and remove the cable every time. Remove one stick of RAM and try again. Make sure to try another stick in the main slot if it still works.

It wouldn't hurt to reseat the CPU and check the PSU cables to the MB CPU etc.

Link to comment
Share on other sites

Link to post
Share on other sites

29 minutes ago, MOD_Drummer said:

I need some help...I'm out of ideas. 

Specs:

Intel 11900k (yes I know)

G.SKILL Trident royal 4800(3x16 GB)

Samsung 980 NVMe

ASUS ROG Strix Gaming RTX 3090

ASUS ROG Maximus XIII Hero

Corsair HX1200 PSU

Is that meant to say 3x or a typo?

Router:  Intel N100 (pfSense) WiFi6: Zyxel NWA210AX (1.7Gbit peak at 160Mhz)
WiFi5: Ubiquiti NanoHD OpenWRT (~500Mbit at 80Mhz) Switches: Netgear MS510TXUP, MS510TXPP, GS110EMX
ISPs: Zen Full Fibre 900 (~930Mbit down, 115Mbit up) + Three 5G (~800Mbit down, 115Mbit up)
Upgrading Laptop/Desktop CNVIo WiFi 5 cards to PCIe WiFi6e/7

Link to comment
Share on other sites

Link to post
Share on other sites

3x 16 … thats probably the issue tbh.

 

try 2x 16 make sure its in the correct slots.

The direction tells you... the direction

-Scott Manley, 2021

 

Softwares used:

Corsair Link (Anime Edition) 

MSI Afterburner 

OpenRGB

Lively Wallpaper 

OBS Studio

Shutter Encoder

Avidemux

FSResizer

Audacity 

VLC

WMP

GIMP

HWiNFO64

Paint

3D Paint

GitHub Desktop 

Superposition 

Prime95

Aida64

GPUZ

CPUZ

Generic Logviewer

 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

5 hours ago, Alex Atkin UK said:

Is that meant to say 3x or a typo?

Typo. Edited thank you.

Link to comment
Share on other sites

Link to post
Share on other sites

5 hours ago, Frizz said:

Those were some good steps to try!

Here are a few more:

Does event viewer show anything in application logs?

Reset CMOS just in case there is a weird option set or the IC got corrupted.

Download crystal disk, does SMART info show anything drive related? Any reallocated sectors uncorrectable errors or anything?

 Then try a min config, power off the system and remove the cable every time. Remove one stick of RAM and try again. Make sure to try another stick in the main slot if it still works.

It wouldn't hurt to reseat the CPU and check the PSU cables to the MB CPU etc.

Yeah I reset CMOS before windows install. Still a thing. Just loaded crystal disk. Nothing serious reported. Will single slot RAM. Don't know though memtest86 passing doesn't leave me much hope of it being RAM. 

Link to comment
Share on other sites

Link to post
Share on other sites

Solved my issue.

My RAM will not run in XMP 1, 2 or stock out the box.

I manually input timings and tuned my RAM...runs as smooth as butter. 

 

I have never seen a PC crash on out the box settings. Anyone seen this?

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×