what would you recommend

[gampla]

i recently brought a shinobi xl and put my 2 sickleflow fans in along with the two bitenix spectre fans

 

 

note

the black arrows are the spectre

red arrow are sickleflow

grey are sp120 like the stock fans from h80 - h110 series

[Polyvalent]

What exactly are you asking here

[gampla]

what case fan if and what should i replace?

[BoDyBaG2224]

All you need is more intakes compared to outtakes. You aren't going to get tangible performance or temperature gains that mean anything trying to analyze the fan config (2 on top, 1 on bottom, up or down, in/out).  If you aren't using a small form factor case where everything is jammed into it you are fine with literally any fan configuration as long as you are not opposing flow (even then, I'm willing to bet in a case like this it wouldn't matter).

[gampla]

All you need is more intakes compared to outtakes. You aren't going to get tangible performance or temperature gains that mean anything trying to analyze the fan config (2 on top, 1 on bottom, up or down, in/out).  If you aren't using a small form factor case where everything is jammed into it you are fine with literally any fan configuration as long as you are not opposing flow (even then, I'm willing to bet in a case like this it wouldn't matter).

ive got 1x 200mm intake 2x120mm intake 3x 120mm out takes

[skullbringer]

Depending on how much your graphics card is going to impact your air temperature inside the case, you can probably achieve up to 5°C cooler temps on your CPU by making the rear fan an intake. Maybe put a dust filter on it as the mesh on rear mounts is ususally quite open.

[gampla]

im getting 30-40c on cpu when im running heaven benchmark 4.0 and 70c on gpu