modded skyrim 100% gpu usage crash

[SAV1OUR]

alright i have done everything i know to try fix it clearing masters running boss cleaning etc and still no luck 

i am running 

4k textures 

phinix enb 

no modded water textures or anything 

im able to run around for about 10 or so minutes then it crashes to desktop and i look at asus gpu twaek and it says the usage is a 100% i am running my 680 over clocked anyone got any ideas on what to do? 

[bob345]

if you dont have it, get this http://www.nexusmods.com/skyrim/mods/38649/? it helps a tone if you are running a bunch of high res textures. if that does not work try a clean skyrim install

[SAV1OUR]

if you dont have it, get this http://www.nexusmods.com/skyrim/mods/38649/? it helps a tone if you are running a bunch of high res textures. if that does not work try a clean skyrim install

alright ill look into it 

[bob345]

alright ill look into it 

also, if you dont have the unofficial skyrim patches, those too can help a ton.

[SAV1OUR]

also, if you dont have the unofficial skyrim patches, those too can help a ton.

i have done a bunch of the stuff in the dlc so i doubt ill need the patches for that ill see if theres anything on the nexus that would make scene to add  

[JLCitadel]

i have done a bunch of the stuff in the dlc so i doubt ill need the patches for that ill see if theres anything on the nexus that would make scene to add  

 

What you can do to make life easier, it'll be more lengthy, but you can identify the problem easier. Is take a clean fresh copy of skyrim, and test it, then add one mod each time, and test it. That will isolate the issue.

[SAV1OUR]

What you can do to make life easier, it'll be more lengthy, but you can identify the problem easier. Is take a clean fresh copy of skyrim, and test it, then add one mod each time, and test it. That will isolate the issue.

i cleaned installed the other day and worked out what was making it unstable. and nothings clashing in the files so im thinking its something to do with the enb or my 680

[JLCitadel]

i cleaned installed the other day and worked out what was making it unstable. and nothings clashing in the files so im thinking its something to do with the enb or my 680

 

Well, did you crash when it was completely clean?

 

If not then it could be your 680 can't handle the mods, is it's temp reaching upper levels?

[SAV1OUR]

Well, did you crash when it was completely clean?

 

If not then it could be your 680 can't handle the mods, is it's temp reaching upper levels?

i cleaned installed disabling all steam mods nexus mods and enb files and ran around with a clean file for a while easy 

temps are hanging around 40-50s 

[JLCitadel]

i cleaned installed disabling all steam mods nexus mods and enb files and ran around with a clean file for a while easy 

temps are hanging around 40-50s 

 

so it didn't crash at all while it was clean?

does the temp rise a lot when mods are in?

is the cpu under too much load itself?

[TheNinjaNextDor]

Try going to stock clocks.

 

The same things happened to me in Star Citizen until I turn down my clockspeed.

[bob345]

i cleaned installed the other day and worked out what was making it unstable. and nothings clashing in the files so im thinking its something to do with the enb or my 680

Did you configure skyrimprefs correctly when installing the enb? if not that can screw up all kinds of things. make sure bFloatPointRenderTarget is set to 1. Also do you have any kind of view distance mods?

[SAV1OUR]

so it didn't crash at all while it was clean?

does the temp rise a lot when mods are in?

is the cpu under too much load itself?

1. didnt crash while was clean 

2. temps say around the 40s no matter what 

3. checking now 

 

Try going to stock clocks.

 

The same things happened to me in Star Citizen until I turn down my clockspeed.

im running at stock and have a few issues but it seems to be slowing down 

 

Did you configure skyrimprefs correctly when installing the enb? if not that can screw up all kinds of things. make sure bFloatPointRenderTarget is set to 1. Also do you have any kind of view distance mods?

enb was installed correctly following makers instructions and guides i have increased the cell load distance and the grass and tree load but its not crazy high to case crashes ill run around and see cpu usage and see if decreasing distance load will help 

[JLCitadel]

1. didnt crash while was clean 

2. temps say around the 40s no matter what 

3. checking now 

 

im running at stock and have a few issues but it seems to be slowing down 

 

enb was installed correctly following makers instructions and guides i have increased the cell load distance and the grass and tree load but its not crazy high to case crashes ill run around and see cpu usage and see if decreasing distance load will help 

 

Then there's something wrong with the mod setup your using, once you've figured out the CPU let me know ill suggest other things based on its results

[SAV1OUR]

Then there's something wrong with the mod setup your using, once you've figured out the CPU let me know ill suggest other things based on its results

ok so this isnt 100% for sure but each cores sitting around 50% however i decreased the view distance loading in im having less crashes 

[SAV1OUR]

@TheNinjaNextDor @Luclocke @bob345 

upon further inspections and multiple runs between river wood and whiterun (though it would be a good stress test because of how open it is) i found that adjusting the modification i made to the viewing distance and loading of trees and such i wasnt having as many crashes yay!

link to the guide i followed that changed the loading for reference
http://gaming.stackexchange.com/questions/35760/how-can-i-extend-the-view-distances-further  

[JLCitadel]

@TheNinjaNextDor @Luclocke @bob345 

upon further inspections and multiple runs between river wood and whiterun (though it would be a good stress test because of how open it is) i found that adjusting the modification i made to the viewing distance and loading of trees and such i wasnt having as many crashes yay!

link to the guide i followed that changed the loading for reference

http://gaming.stackexchange.com/questions/35760/how-can-i-extend-the-view-distances-further  

 

Alright makes sense, glad you fixed it (sort of "not as many crashes" [i'd aim for zero]) but as long as it doesn't bother you its what matters.