linux Pop! OS kernel taking too long to boot

[zemm]

Just installed Linux for the first time and went with PopOS, after trying to do some troubleshooting I didn't end up with much progress.

Here's the dmesg

[    0.268252] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.268291] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.268339] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.268382] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.268418] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.268454] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.268489] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.268954] iommu: Default domain type: Translated 
[    0.268954] SCSI subsystem initialized
[    0.268954] libata version 3.00 loaded.
[    0.268954] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.268954] pci 0000:09:00.0: vgaarb: bridge control possible
[    0.268954] pci 0000:09:00.0: vgaarb: setting as boot device
[    0.268954] vgaarb: loaded
[    0.268954] ACPI: bus type USB registered
[    0.268954] usbcore: registered new interface driver usbfs
[    0.268954] usbcore: registered new interface driver hub
[    0.268954] usbcore: registered new device driver usb
[    0.268954] pps_core: LinuxPPS API ver. 1 registered
[    0.268954] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.268954] PTP clock support registered
[    0.268954] EDAC MC: Ver: 3.0.0
[    0.268954] Registered efivars operations
[    0.268954] NetLabel: Initializing
[    0.268954] NetLabel:  domain hash size = 128
[    0.268954] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.268954] NetLabel:  unlabeled traffic allowed by default
[    0.268954] PCI: Using ACPI for IRQ routing
[    0.269790] PCI: pci_cache_line_size set to 64 bytes
[    0.269866] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.269867] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[    0.269868] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.269869] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.269870] e820: reserve RAM buffer [mem 0xd5b58018-0xd7ffffff]
[    0.269870] e820: reserve RAM buffer [mem 0xd6605000-0xd7ffffff]
[    0.269871] e820: reserve RAM buffer [mem 0xd8e8f000-0xdbffffff]
[    0.269872] e820: reserve RAM buffer [mem 0xda4f6000-0xdbffffff]
[    0.269872] e820: reserve RAM buffer [mem 0xdbe93000-0xdbffffff]
[    0.269873] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.269873] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[    0.269877] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.269877] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.273171] clocksource: Switched to clocksource tsc-early
[    0.277560] VFS: Disk quotas dquot_6.6.0
[    0.277573] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.277639] AppArmor: AppArmor Filesystem Enabled
[    0.277651] pnp: PnP ACPI init
[    0.277720] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.277724] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.277785] system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved
[    0.277788] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.277816] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.277963] system 00:03: [io  0x0280-0x028f] has been reserved
[    0.277964] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.277965] system 00:03: [io  0x02a0-0x02af] has been reserved
[    0.277966] system 00:03: [io  0x02b0-0x02bf] has been reserved
[    0.277968] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278164] pnp 00:04: [dma 0 disabled]
[    0.278185] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.278375] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.278376] system 00:05: [io  0x040b] has been reserved
[    0.278377] system 00:05: [io  0x04d6] has been reserved
[    0.278378] system 00:05: [io  0x0c00-0x0c01] has been reserved
[    0.278378] system 00:05: [io  0x0c14] has been reserved
[    0.278379] system 00:05: [io  0x0c50-0x0c51] has been reserved
[    0.278380] system 00:05: [io  0x0c52] has been reserved
[    0.278381] system 00:05: [io  0x0c6c] has been reserved
[    0.278382] system 00:05: [io  0x0c6f] has been reserved
[    0.278383] system 00:05: [io  0x0cd0-0x0cd1] has been reserved
[    0.278384] system 00:05: [io  0x0cd2-0x0cd3] has been reserved
[    0.278385] system 00:05: [io  0x0cd4-0x0cd5] has been reserved
[    0.278386] system 00:05: [io  0x0cd6-0x0cd7] has been reserved
[    0.278387] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[    0.278387] system 00:05: [io  0x0800-0x089f] has been reserved
[    0.278388] system 00:05: [io  0x0b00-0x0b0f] has been reserved
[    0.278389] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[    0.278390] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.278391] system 00:05: [io  0x0910-0x091f] has been reserved
[    0.278392] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.278393] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.278394] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.278395] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.278396] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.278397] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.278398] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.278400] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278731] pnp: PnP ACPI: found 6 devices
[    0.284122] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.284160] NET: Registered protocol family 2
[    0.284316] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.285424] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.285503] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.285663] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.285727] TCP: Hash tables configured (established 131072 bind 65536)
[    0.285798] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.285838] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.285870] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.285926] NET: Registered protocol family 1
[    0.285929] NET: Registered protocol family 44
[    0.285939] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.285951] pci 0000:02:01.0: PCI bridge to [bus 04]
[    0.285962] pci 0000:02:04.0: PCI bridge to [bus 05]
[    0.285973] pci 0000:02:05.0: PCI bridge to [bus 06]
[    0.285984] pci 0000:02:06.0: PCI bridge to [bus 07]
[    0.285986] pci 0000:02:06.0:   bridge window [io  0xe000-0xefff]
[    0.285991] pci 0000:02:06.0:   bridge window [mem 0xf7600000-0xf76fffff]
[    0.285999] pci 0000:02:07.0: PCI bridge to [bus 08]
[    0.286001] pci 0000:02:07.0:   bridge window [io  0xd000-0xdfff]
[    0.286005] pci 0000:02:07.0:   bridge window [mem 0xf7500000-0xf75fffff]
[    0.286008] pci 0000:02:07.0:   bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
[    0.286013] pci 0000:01:00.2: PCI bridge to [bus 02-08]
[    0.286015] pci 0000:01:00.2:   bridge window [io  0xd000-0xefff]
[    0.286019] pci 0000:01:00.2:   bridge window [mem 0xf7500000-0xf76fffff]
[    0.286022] pci 0000:01:00.2:   bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
[    0.286027] pci 0000:00:01.3: PCI bridge to [bus 01-08]
[    0.286028] pci 0000:00:01.3:   bridge window [io  0xd000-0xefff]
[    0.286031] pci 0000:00:01.3:   bridge window [mem 0xf7500000-0xf77fffff]
[    0.286033] pci 0000:00:01.3:   bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
[    0.286037] pci 0000:00:03.1: PCI bridge to [bus 09]
[    0.286038] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    0.286040] pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.286042] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf20fffff 64bit pref]
[    0.286046] pci 0000:00:07.1: PCI bridge to [bus 0a]
[    0.286052] pci 0000:00:08.1: PCI bridge to [bus 0b]
[    0.286055] pci 0000:00:08.1:   bridge window [mem 0xf7200000-0xf74fffff]
[    0.286059] pci 0000:00:08.2: PCI bridge to [bus 0c]
[    0.286061] pci 0000:00:08.2:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.286065] pci 0000:00:08.3: PCI bridge to [bus 0d]
[    0.286068] pci 0000:00:08.3:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.286072] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.286074] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.286074] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.286075] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.286076] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.286077] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.286078] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.286079] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.286080] pci_bus 0000:01: resource 0 [io  0xd000-0xefff]
[    0.286080] pci_bus 0000:01: resource 1 [mem 0xf7500000-0xf77fffff]
[    0.286081] pci_bus 0000:01: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref]
[    0.286082] pci_bus 0000:02: resource 0 [io  0xd000-0xefff]
[    0.286083] pci_bus 0000:02: resource 1 [mem 0xf7500000-0xf76fffff]
[    0.286083] pci_bus 0000:02: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref]
[    0.286084] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
[    0.286085] pci_bus 0000:07: resource 1 [mem 0xf7600000-0xf76fffff]
[    0.286086] pci_bus 0000:08: resource 0 [io  0xd000-0xdfff]
[    0.286087] pci_bus 0000:08: resource 1 [mem 0xf7500000-0xf75fffff]
[    0.286088] pci_bus 0000:08: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref]
[    0.286089] pci_bus 0000:09: resource 0 [io  0xf000-0xffff]
[    0.286089] pci_bus 0000:09: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.286090] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf20fffff 64bit pref]
[    0.286091] pci_bus 0000:0b: resource 1 [mem 0xf7200000-0xf74fffff]
[    0.286092] pci_bus 0000:0c: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.286093] pci_bus 0000:0d: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.286296] pci 0000:09:00.1: D0 power state depends on 0000:09:00.0
[    0.286317] pci 0000:09:00.2: D0 power state depends on 0000:09:00.0
[    0.286476] pci 0000:09:00.3: D0 power state depends on 0000:09:00.0
[    0.286604] PCI: CLS 64 bytes, default 64
[    0.286632] Trying to unpack rootfs image as initramfs...
[    0.428403] Freeing initrd memory: 104848K
[    0.428450] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.428507] pci 0000:00:01.0: Adding to iommu group 0
[    0.428513] pci 0000:00:01.3: Adding to iommu group 0
[    0.428522] pci 0000:00:02.0: Adding to iommu group 1
[    0.428533] pci 0000:00:03.0: Adding to iommu group 2
[    0.428539] pci 0000:00:03.1: Adding to iommu group 2
[    0.428547] pci 0000:00:04.0: Adding to iommu group 3
[    0.428556] pci 0000:00:05.0: Adding to iommu group 4
[    0.428566] pci 0000:00:07.0: Adding to iommu group 5
[    0.428573] pci 0000:00:07.1: Adding to iommu group 6
[    0.428584] pci 0000:00:08.0: Adding to iommu group 7
[    0.428591] pci 0000:00:08.1: Adding to iommu group 8
[    0.428598] pci 0000:00:08.2: Adding to iommu group 9
[    0.428605] pci 0000:00:08.3: Adding to iommu group 10
[    0.428617] pci 0000:00:14.0: Adding to iommu group 11
[    0.428623] pci 0000:00:14.3: Adding to iommu group 11
[    0.428651] pci 0000:00:18.0: Adding to iommu group 12
[    0.428656] pci 0000:00:18.1: Adding to iommu group 12
[    0.428662] pci 0000:00:18.2: Adding to iommu group 12
[    0.428668] pci 0000:00:18.3: Adding to iommu group 12
[    0.428674] pci 0000:00:18.4: Adding to iommu group 12
[    0.428680] pci 0000:00:18.5: Adding to iommu group 12
[    0.428686] pci 0000:00:18.6: Adding to iommu group 12
[    0.428693] pci 0000:00:18.7: Adding to iommu group 12
[    0.428696] pci 0000:01:00.0: Adding to iommu group 0
[    0.428698] pci 0000:01:00.1: Adding to iommu group 0
[    0.428701] pci 0000:01:00.2: Adding to iommu group 0
[    0.428704] pci 0000:02:00.0: Adding to iommu group 0
[    0.428707] pci 0000:02:01.0: Adding to iommu group 0
[    0.428709] pci 0000:02:04.0: Adding to iommu group 0
[    0.428712] pci 0000:02:05.0: Adding to iommu group 0
[    0.428715] pci 0000:02:06.0: Adding to iommu group 0
[    0.428718] pci 0000:02:07.0: Adding to iommu group 0
[    0.428721] pci 0000:07:00.0: Adding to iommu group 0
[    0.428724] pci 0000:08:00.0: Adding to iommu group 0
[    0.428727] pci 0000:09:00.0: Adding to iommu group 2
[    0.428730] pci 0000:09:00.1: Adding to iommu group 2
[    0.428732] pci 0000:09:00.2: Adding to iommu group 2
[    0.428735] pci 0000:09:00.3: Adding to iommu group 2
[    0.428743] pci 0000:0a:00.0: Adding to iommu group 13
[    0.428752] pci 0000:0b:00.0: Adding to iommu group 14
[    0.428760] pci 0000:0b:00.1: Adding to iommu group 15
[    0.428768] pci 0000:0b:00.3: Adding to iommu group 16
[    0.428777] pci 0000:0b:00.4: Adding to iommu group 17
[    0.428784] pci 0000:0c:00.0: Adding to iommu group 18
[    0.428791] pci 0000:0d:00.0: Adding to iommu group 19
[    0.431629] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.431633] pci 0000:00:00.2: AMD-Vi: Extended features (0x58f77ef22294ade):
[    0.431634]  PPR X2APIC NX GT IA GA PC GA_vAPIC
[    0.431637] AMD-Vi: Interrupt remapping enabled
[    0.431638] AMD-Vi: Virtual APIC enabled
[    0.431638] AMD-Vi: X2APIC enabled
[    0.431736] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.432277] amd_uncore: 4  amd_df counters detected
[    0.432282] amd_uncore: 6  amd_l3 counters detected
[    0.432428] LVT offset 0 assigned for vector 0x400
[    0.432486] perf: AMD IBS detected (0x000003ff)
[    0.432490] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.432526] check: Scanning for low memory corruption every 60 seconds
[    0.432888] Initialise system trusted keyrings
[    0.432901] Key type blacklist registered
[    0.432931] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.433531] zbud: loaded
[    0.433699] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.433783] fuse: init (API version 7.33)
[    0.433881] integrity: Platform Keyring initialized
[    0.436231] Key type asymmetric registered
[    0.436232] Asymmetric key parser 'x509' registered
[    0.436239] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.436263] io scheduler mq-deadline registered
[    0.436841] pcieport 0000:00:01.3: PME: Signaling with IRQ 26
[    0.436907] pcieport 0000:00:01.3: AER: enabled with IRQ 26
[    0.437012] pcieport 0000:00:03.1: PME: Signaling with IRQ 27
[    0.437058] pcieport 0000:00:03.1: AER: enabled with IRQ 27
[    0.437212] pcieport 0000:00:07.1: PME: Signaling with IRQ 29
[    0.437260] pcieport 0000:00:07.1: AER: enabled with IRQ 29
[    0.437346] pcieport 0000:00:08.1: PME: Signaling with IRQ 30
[    0.437396] pcieport 0000:00:08.1: AER: enabled with IRQ 30
[    0.437509] pcieport 0000:00:08.2: PME: Signaling with IRQ 31
[    0.437551] pcieport 0000:00:08.2: AER: enabled with IRQ 31
[    0.437661] pcieport 0000:00:08.3: PME: Signaling with IRQ 32
[    0.437700] pcieport 0000:00:08.3: AER: enabled with IRQ 32
[    0.438616] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.438646] efifb: probing for efifb
[    0.438655] efifb: showing boot graphics
[    0.443540] efifb: framebuffer at 0xe0000000, using 23040k, total 23040k
[    0.443541] efifb: mode is 2560x1440x32, linelength=16384, pages=1
[    0.443542] efifb: scrolling: redraw
[    0.443542] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.443577] fbcon: Deferring console take-over
[    0.443577] fb0: EFI VGA frame buffer device
[    0.443646] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.443659] ACPI: Power Button [PWRB]
[    0.443679] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.443698] ACPI: Power Button [PWRF]
[    0.446856] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1182
[    0.446863] Monitor-Mwait will be used to enter C-1 state
[    0.446865] ACPI: \_PR_.C000: Found 2 idle states
[    0.446925] ACPI: \_PR_.C002: Found 2 idle states
[    0.446979] ACPI: \_PR_.C004: Found 2 idle states
[    0.447043] ACPI: \_PR_.C006: Found 2 idle states
[    0.447128] ACPI: \_PR_.C008: Found 2 idle states
[    0.447212] ACPI: \_PR_.C00A: Found 2 idle states
[    0.447267] ACPI: \_PR_.C001: Found 2 idle states
[    0.447322] ACPI: \_PR_.C003: Found 2 idle states
[    0.447382] ACPI: \_PR_.C005: Found 2 idle states
[    0.447461] ACPI: \_PR_.C007: Found 2 idle states
[    0.447549] ACPI: \_PR_.C009: Found 2 idle states
[    0.447628] ACPI: \_PR_.C00B: Found 2 idle states
[    0.447795] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.468333] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.469445] Linux agpgart interface v0.103
[    0.529035] loop: module loaded
[    0.529186] libphy: Fixed MDIO Bus: probed
[    0.529187] tun: Universal TUN/TAP device driver, 1.6
[    0.529217] PPP generic driver version 2.4.2
[    0.529247] VFIO - User Level meta-driver version: 0.3
[    0.529279] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.529281] ehci-pci: EHCI PCI platform driver
[    0.529286] ehci-platform: EHCI generic platform driver
[    0.529290] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.529291] ohci-pci: OHCI PCI platform driver
[    0.529296] ohci-platform: OHCI generic platform driver
[    0.529299] uhci_hcd: USB Universal Host Controller Interface driver
[    0.529317] i8042: PNP: No PS/2 controller found.
[    0.529340] mousedev: PS/2 mouse device common for all mice
[    0.529394] rtc_cmos 00:02: RTC can wake from S4
[    0.529560] rtc_cmos 00:02: registered as rtc0
[    0.529604] rtc_cmos 00:02: setting system clock to 2021-08-01T05:11:56 UTC (1627794716)
[    0.529612] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.529616] i2c /dev entries driver
[    0.529633] device-mapper: uevent: version 1.0.3
[    0.529659] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    0.529669] platform eisa.0: Probing EISA bus 0
[    0.529670] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.529671] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.529672] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.529672] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.529673] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.529674] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.529674] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.529675] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.529676] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.529676] platform eisa.0: EISA: Detected 0 cards
[    0.529764] ledtrig-cpu: registered to indicate activity on CPUs
[    0.529766] EFI Variables Facility v0.08 2004-May-17
[    0.542220] drop_monitor: Initializing network drop monitor service
[    0.542306] NET: Registered protocol family 10
[    0.544766] Segment Routing with IPv6
[    0.544776] NET: Registered protocol family 17
[    0.544803] Key type dns_resolver registered
[    0.545293] microcode: CPU0: patch_level=0x08701021
[    0.545298] microcode: CPU1: patch_level=0x08701021
[    0.545303] microcode: CPU2: patch_level=0x08701021
[    0.545308] microcode: CPU3: patch_level=0x08701021
[    0.545314] microcode: CPU4: patch_level=0x08701021
[    0.545320] microcode: CPU5: patch_level=0x08701021
[    0.545323] microcode: CPU6: patch_level=0x08701021
[    0.545328] microcode: CPU7: patch_level=0x08701021
[    0.545330] microcode: CPU8: patch_level=0x08701021
[    0.545335] microcode: CPU9: patch_level=0x08701021
[    0.545340] microcode: CPU10: patch_level=0x08701021
[    0.545347] microcode: CPU11: patch_level=0x08701021
[    0.545365] microcode: Microcode Update Driver: v2.2.
[    0.545457] resctrl: L3 allocation detected
[    0.545458] resctrl: L3DATA allocation detected
[    0.545459] resctrl: L3CODE allocation detected
[    0.545459] resctrl: MB allocation detected
[    0.545459] resctrl: L3 monitoring detected
[    0.545461] IPI shorthand broadcast: enabled
[    0.545467] sched_clock: Marking stable (545189440, 263128)->(546978484, -1525916)
[    0.545533] registered taskstats version 1
[    0.545541] Loading compiled-in X.509 certificates
[    0.545929] Loaded X.509 cert 'Build time autogenerated kernel key: abdbbc61580c08d661c598b1c838994880185df1'
[    0.546263] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.546590] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.547280] zswap: loaded using pool lzo/zbud
[    0.547368] Key type ._fscrypt registered
[    0.547368] Key type .fscrypt registered
[    0.547369] Key type fscrypt-provisioning registered
[    0.547394] Key type trusted registered
[    0.548462] Key type encrypted registered
[    0.548464] AppArmor: AppArmor sha1 policy hashing enabled
[    0.548911] integrity: Loading X.509 certificate: UEFI:db
[    0.548926] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.548927] integrity: Loading X.509 certificate: UEFI:db
[    0.548937] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.549655] ima: Allocated hash algorithm: sha1
[    0.657221] ima: No architecture policies found
[    0.657227] evm: Initialising EVM extended attributes:
[    0.657228] evm: security.selinux
[    0.657228] evm: security.SMACK64
[    0.657229] evm: security.SMACK64EXEC
[    0.657229] evm: security.SMACK64TRANSMUTE
[    0.657229] evm: security.SMACK64MMAP
[    0.657230] evm: security.apparmor
[    0.657230] evm: security.ima
[    0.657230] evm: security.capability
[    0.657231] evm: HMAC attrs: 0x1
[    0.657479] PM:   Magic number: 1:231:162
[    0.657518] acpi device:29: hash matches
[    0.657759] acpi_cpufreq: overriding BIOS provided _PSD data
[    0.705234] RAS: Correctable Errors collector initialized.
[    0.706365] Freeing unused decrypted memory: 2036K
[    0.706640] Freeing unused kernel image (initmem) memory: 2692K
[    0.713204] Write protecting the kernel read-only data: 28672k
[    0.713572] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.713638] Freeing unused kernel image (rodata/data gap) memory: 84K
[    0.738201] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.738204] Run /init as init process
[    0.738204]   with arguments:
[    0.738205]     /init
[    0.738205]     splash
[    0.738206]   with environment:
[    0.738206]     HOME=/
[    0.738207]     TERM=linux
[    0.786160] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    0.786166] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    0.786399] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    0.787237] ahci 0000:01:00.1: version 3.0
[    0.787249] ahci 0000:01:00.1: enabling device (0000 -> 0002)
[    0.787765] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[    0.787807] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    0.787810] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.788267] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.788272] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    0.788384] cryptd: max_cpu_qlen set to 1000
[    0.791359] scsi host0: ahci
[    0.791431] AVX2 version of gcm_enc/dec engaged.
[    0.791432] AES CTR mode by8 optimization enabled
[    0.791450] scsi host1: ahci
[    0.792442] scsi host2: ahci
[    0.792613] scsi host3: ahci
[    0.792705] scsi host4: ahci
[    0.792791] scsi host5: ahci
[    0.792893] scsi host6: ahci
[    0.793003] scsi host7: ahci
[    0.793041] ata1: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780100 irq 42
[    0.793044] ata2: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780180 irq 42
[    0.793046] ata3: DUMMY
[    0.793047] ata4: DUMMY
[    0.793049] ata5: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780300 irq 42
[    0.793051] ata6: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780380 irq 42
[    0.793052] ata7: DUMMY
[    0.793053] ata8: DUMMY
[    0.793247] ahci 0000:07:00.0: SSS flag set, parallel bus scan disabled
[    0.793294] ahci 0000:07:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.793296] ahci 0000:07:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    0.793472] scsi host8: ahci
[    0.793570] scsi host9: ahci
[    0.793605] ata9: SATA max UDMA/133 abar m512@0xf7600000 port 0xf7600100 irq 43
[    0.793608] ata10: SATA max UDMA/133 abar m512@0xf7600000 port 0xf7600180 irq 43
[    0.793633] ahci 0000:0c:00.0: enabling device (0000 -> 0002)
[    0.793734] ahci 0000:0c:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.793736] ahci 0000:0c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    0.797181] scsi host10: ahci
[    0.797274] ata11: SATA max UDMA/133 abar m2048@0xf7900000 port 0xf7900100 irq 45
[    0.797292] ahci 0000:0d:00.0: enabling device (0000 -> 0002)
[    0.797392] ahci 0000:0d:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.797395] ahci 0000:0d:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    0.797521] scsi host11: ahci
[    0.797555] ata12: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800100 irq 47
[    0.810663] libphy: r8169: probed
[    0.810803] r8169 0000:08:00.0 eth0: RTL8168g/8111g, 70:85:c2:77:16:94, XID 4c0, IRQ 48
[    0.810806] r8169 0000:08:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    0.811658] r8169 0000:08:00.0 enp8s0: renamed from eth0
[    0.843687] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000010048000410
[    0.843834] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    0.843836] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.843837] usb usb1: Product: xHCI Host Controller
[    0.843837] usb usb1: Manufacturer: Linux 5.11.0-7620-generic xhci-hcd
[    0.843838] usb usb1: SerialNumber: 0000:01:00.0
[    0.843907] hub 1-0:1.0: USB hub found
[    0.843920] hub 1-0:1.0: 10 ports detected
[    0.844141] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.844143] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    0.844145] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.844170] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.844180] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[    0.844181] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.844182] usb usb2: Product: xHCI Host Controller
[    0.844183] usb usb2: Manufacturer: Linux 5.11.0-7620-generic xhci-hcd
[    0.844183] usb usb2: SerialNumber: 0000:01:00.0
[    0.844228] hub 2-0:1.0: USB hub found
[    0.844234] hub 2-0:1.0: 4 ports detected
[    0.844282] usb: port power management may be unreliable
[    0.844427] xhci_hcd 0000:09:00.2: xHCI Host Controller
[    0.844429] xhci_hcd 0000:09:00.2: new USB bus registered, assigned bus number 3
[    0.845021] xhci_hcd 0000:09:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
[    0.845121] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    0.845123] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.845124] usb usb3: Product: xHCI Host Controller
[    0.845124] usb usb3: Manufacturer: Linux 5.11.0-7620-generic xhci-hcd
[    0.845125] usb usb3: SerialNumber: 0000:09:00.2
[    0.845165] hub 3-0:1.0: USB hub found
[    0.845170] hub 3-0:1.0: 2 ports detected
[    0.845247] xhci_hcd 0000:09:00.2: xHCI Host Controller
[    0.845249] xhci_hcd 0000:09:00.2: new USB bus registered, assigned bus number 4
[    0.845250] xhci_hcd 0000:09:00.2: Host supports USB 3.1 Enhanced SuperSpeed
[    0.845267] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.845276] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[    0.845277] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.845278] usb usb4: Product: xHCI Host Controller
[    0.845279] usb usb4: Manufacturer: Linux 5.11.0-7620-generic xhci-hcd
[    0.845279] usb usb4: SerialNumber: 0000:09:00.2
[    0.845315] hub 4-0:1.0: USB hub found
[    0.845322] hub 4-0:1.0: 4 ports detected
[    0.845448] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    0.845450] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 5
[    0.845553] xhci_hcd 0000:0b:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
[    0.845804] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    0.845805] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.845806] usb usb5: Product: xHCI Host Controller
[    0.845807] usb usb5: Manufacturer: Linux 5.11.0-7620-generic xhci-hcd
[    0.845807] usb usb5: SerialNumber: 0000:0b:00.3
[    0.845852] hub 5-0:1.0: USB hub found
[    0.845857] hub 5-0:1.0: 4 ports detected
[    0.845961] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    0.845963] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 6
[    0.845964] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    0.845986] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.845996] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[    0.845997] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.845998] usb usb6: Product: xHCI Host Controller
[    0.845999] usb usb6: Manufacturer: Linux 5.11.0-7620-generic xhci-hcd
[    0.845999] usb usb6: SerialNumber: 0000:0b:00.3
[    0.846042] hub 6-0:1.0: USB hub found
[    0.846048] hub 6-0:1.0: 4 ports detected
[    1.110958] ata12: SATA link down (SStatus 0 SControl 300)
[    1.112727] ata11: SATA link down (SStatus 0 SControl 300)
[    1.180139] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[    1.180141] usb 1-6: new full-speed USB device number 2 using xhci_hcd
[    1.256148] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.256160] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.256855] ata9.00: ATA-10: ADATA SU800, R0126A, max UDMA/133
[    1.256856] ata9.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.257265] ata9.00: configured for UDMA/133
[    1.293436] ata1.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[    1.293438] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.339834] usb 5-1: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=10.80
[    1.339836] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.339837] usb 5-1: Product: USB2.0 Hub
[    1.339838] usb 5-1: Manufacturer: VIA Labs, Inc.
[    1.353274] ata1.00: configured for UDMA/133
[    1.353362] scsi 0:0:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[    1.353465] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.353476] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.353478] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.353482] sd 0:0:0:0: [sda] Write Protect is off
[    1.353483] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.353488] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.390225] hub 5-1:1.0: USB hub found
[    1.390582] hub 5-1:1.0: 4 ports detected
[    1.425018]  sda: sda2
[    1.425242] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.448139] tsc: Refined TSC clocksource calibration: 4192.124 MHz
[    1.448145] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d51807ee, max_idle_ns: 440795380511 ns
[    1.448172] clocksource: Switched to clocksource tsc
[    1.502822] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.504946] usb 1-6: New USB device found, idVendor=2516, idProduct=0051, bcdDevice=11.01
[    1.504949] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    1.504950] usb 1-6: Product: AMD SR4 lamplight Control
[    1.504951] usb 1-6: Manufacturer: Cooler Master Technology Inc.
[    1.521154] hid: raw HID events driver (C) Jiri Kosina
[    1.536711] usbcore: registered new interface driver usbhid
[    1.536712] usbhid: USB HID core driver
[    1.537707] input: Cooler Master Technology Inc. AMD SR4 lamplight Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-6/1-6:1.0/0003:2516:0051.0001/input/input2
[    1.596178] hid-generic 0003:2516:0051.0001: input,hidraw0: USB HID v1.11 Keyboard [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:01:00.0-6/input0
[    1.596238] hid-generic 0003:2516:0051.0002: hiddev0,hidraw1: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:01:00.0-6/input1
[    1.596282] input: Cooler Master Technology Inc. AMD SR4 lamplight Control System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-6/1-6:1.2/0003:2516:0051.0003/input/input3
[    1.623037] usb 6-1: New USB device found, idVendor=2109, idProduct=8110, bcdDevice=10.85
[    1.623039] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.623040] usb 6-1: Product: USB3.0 Hub
[    1.623041] usb 6-1: Manufacturer: VIA Labs, Inc.
[    1.646111] hub 6-1:1.0: USB hub found
[    1.648445] hub 6-1:1.0: 4 ports detected
[    1.656176] input: Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-6/1-6:1.2/0003:2516:0051.0003/input/input4
[    1.656210] hid-generic 0003:2516:0051.0003: input,hidraw2: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:01:00.0-6/input2
[    1.666256] ata2: SATA link down (SStatus 0 SControl 300)
[    1.736140] usb 5-4: new full-speed USB device number 3 using xhci_hcd
[    1.978522] ata5: SATA link down (SStatus 0 SControl 300)
[    2.452147] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.453086] ata6.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133
[    2.453088] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    2.454060] ata6.00: configured for UDMA/133
[    2.454151] scsi 5:0:0:0: Direct-Access     ATA      TOSHIBA DT01ACA1 A750 PQ: 0 ANSI: 5
[    2.454240] sd 5:0:0:0: Attached scsi generic sg1 type 0
[    2.454266] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.454268] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[    2.454274] sd 5:0:0:0: [sdb] Write Protect is off
[    2.454275] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.454284] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.454356] scsi 8:0:0:0: Direct-Access     ATA      ADATA SU800      6A   PQ: 0 ANSI: 5
[    2.454440] sd 8:0:0:0: Attached scsi generic sg2 type 0
[    2.454462] sd 8:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.454467] sd 8:0:0:0: [sdc] Write Protect is off
[    2.454468] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.454475] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.479268]  sdc: sdc1 sdc2 sdc3 sdc4
[    2.479574] sd 8:0:0:0: [sdc] Attached SCSI disk
[    2.499368]  sdb: sdb1
[    2.499575] sd 5:0:0:0: [sdb] Attached SCSI disk
[    2.766558] ata10: SATA link down (SStatus 0 SControl 300)
[    7.116990] usb 5-4: New USB device found, idVendor=258a, idProduct=0036, bcdDevice= 1.00
[    7.116993] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.116994] usb 5-4: Product: Wired Gaming Mouse
[    7.116995] usb 5-4: Manufacturer: SINOWEALTH
[    7.129078] input: SINOWEALTH Wired Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:258A:0036.0004/input/input5
[    7.129146] hid-generic 0003:258A:0036.0004: input,hidraw3: USB HID v1.11 Mouse [SINOWEALTH Wired Gaming Mouse] on usb-0000:0b:00.3-4/input0
[    7.135137] input: SINOWEALTH Wired Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.1/0003:258A:0036.0005/input/input6
[    7.192225] hid-generic 0003:258A:0036.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [SINOWEALTH Wired Gaming Mouse] on usb-0000:0b:00.3-4/input1
[    7.224258] input: Glorious Model O as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:258A:0036.0004/input/input9
[    7.224318] glorious 0003:258A:0036.0004: input,hidraw3: USB HID v1.11 Mouse [Glorious Model O] on usb-0000:0b:00.3-4/input0
[    7.232137] usb 5-1.1: new high-speed USB device number 4 using xhci_hcd
[    7.272227] glorious 0003:258A:0036.0005: patching Glorious Model O consumer control report descriptor
[    7.272331] input: Glorious Model O Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.1/0003:258A:0036.0005/input/input10
[    7.332203] input: Glorious Model O Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.1/0003:258A:0036.0005/input/input11
[    7.332249] glorious 0003:258A:0036.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [Glorious Model O] on usb-0000:0b:00.3-4/input1
[    7.888330] usb 5-1.1: New USB device found, idVendor=046d, idProduct=08b6, bcdDevice= 0.21
[    7.888333] usb 5-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[    7.888335] usb 5-1.1: Product: Logi Webcam C920e
[    7.888336] usb 5-1.1: SerialNumber: 168135BF
[    8.220139] usb 5-1.2: new full-speed USB device number 5 using xhci_hcd
[    8.391979] usb 5-1.2: New USB device found, idVendor=04d9, idProduct=0356, bcdDevice= 1.10
[    8.391982] usb 5-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    8.391983] usb 5-1.2: Product: Ducky Keyboard
[    8.391984] usb 5-1.2: Manufacturer: DuckyChannel International Co., Ltd.
[    8.532062] input: DuckyChannel International Co., Ltd. Ducky Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.0/0003:04D9:0356.0006/input/input13
[    8.588192] hid-generic 0003:04D9:0356.0006: input,hidraw5: USB HID v1.11 Keyboard [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input0
[    8.594055] hid-generic 0003:04D9:0356.0007: hiddev2,hidraw6: USB HID v1.11 Device [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input1
[    8.598100] input: DuckyChannel International Co., Ltd. Ducky Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.0008/input/input14
[    8.656187] input: DuckyChannel International Co., Ltd. Ducky Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.0008/input/input15
[    8.656216] input: DuckyChannel International Co., Ltd. Ducky Keyboard Mouse as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.0008/input/input16
[    8.656256] input: DuckyChannel International Co., Ltd. Ducky Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.0008/input/input17
[    8.656288] hid-generic 0003:04D9:0356.0008: input,hidraw7: USB HID v1.11 Mouse [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input2
[   33.107221] usb 5-1.2: USB disconnect, device number 5
[   34.336172] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   34.337328] ata9.00: configured for UDMA/133
[   64.580154] ata9.00: exception Emask 0x0 SAct 0x324 SErr 0x2080000 action 0x6 frozen
[   64.580157] ata9: SError: { 10B8B UnrecFIS }
[   64.580159] ata9.00: failed command: READ FPDMA QUEUED
[   64.580160] ata9.00: cmd 60/08:10:b0:b1:e7/00:00:0e:00:00/40 tag 2 ncq dma 4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)                                                 
[   64.580164] ata9.00: status: { DRDY }
[   64.580165] ata9.00: failed command: READ FPDMA QUEUED
[   64.580166] ata9.00: cmd 60/08:28:80:10:00/00:00:00:00:00/40 tag 5 ncq dma 4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)                                                 
[   64.580168] ata9.00: status: { DRDY }
[   64.580169] ata9.00: failed command: READ FPDMA QUEUED
[   64.580170] ata9.00: cmd 60/08:40:08:a0:8f/00:00:00:00:00/40 tag 8 ncq dma 4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)                                                 
[   64.580173] ata9.00: status: { DRDY }
[   64.580174] ata9.00: failed command: READ FPDMA QUEUED
[   64.580174] ata9.00: cmd 60/07:48:f8:9f:8f/00:00:00:00:00/40 tag 9 ncq dma 3584 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)                                                 
[   64.580177] ata9.00: status: { DRDY }
[   64.580178] ata9: hard resetting link
[   65.056173] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   65.057328] ata9.00: configured for UDMA/133
[   65.057331] ata9.00: device reported invalid CHS sector 0
[   65.057332] ata9.00: device reported invalid CHS sector 0
[   65.057333] ata9.00: device reported invalid CHS sector 0
[   65.057334] ata9.00: device reported invalid CHS sector 0
[   65.057337] sd 8:0:0:0: [sdc] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=30s
[   65.057339] sd 8:0:0:0: [sdc] tag#2 Sense Key : Illegal Request [current] 
[   65.057340] sd 8:0:0:0: [sdc] tag#2 Add. Sense: Unaligned write command
[   65.057342] sd 8:0:0:0: [sdc] tag#2 CDB: Read(10) 28 00 0e e7 b1 b0 00 00 08 00
[   65.057342] blk_update_request: I/O error, dev sdc, sector 250065328 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   65.057349] sd 8:0:0:0: [sdc] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=30s
[   65.057350] sd 8:0:0:0: [sdc] tag#5 Sense Key : Illegal Request [current] 
[   65.057351] sd 8:0:0:0: [sdc] tag#5 Add. Sense: Unaligned write command
[   65.057352] sd 8:0:0:0: [sdc] tag#5 CDB: Read(10) 28 00 00 00 10 80 00 00 08 00
[   65.057352] blk_update_request: I/O error, dev sdc, sector 4224 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   65.057356] sd 8:0:0:0: [sdc] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=30s
[   65.057357] sd 8:0:0:0: [sdc] tag#8 Sense Key : Illegal Request [current] 
[   65.057358] sd 8:0:0:0: [sdc] tag#8 Add. Sense: Unaligned write command
[   65.057359] sd 8:0:0:0: [sdc] tag#8 CDB: Read(10) 28 00 00 8f a0 08 00 00 08 00
[   65.057359] blk_update_request: I/O error, dev sdc, sector 9412616 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   65.057362] sd 8:0:0:0: [sdc] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=30s
[   65.057363] sd 8:0:0:0: [sdc] tag#9 Sense Key : Illegal Request [current] 
[   65.057364] sd 8:0:0:0: [sdc] tag#9 Add. Sense: Unaligned write command
[   65.057365] sd 8:0:0:0: [sdc] tag#9 CDB: Read(10) 28 00 00 8f 9f f8 00 00 07 00
[   65.057365] blk_update_request: I/O error, dev sdc, sector 9412600 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   65.057368] ata9: EH complete
[   66.154916] system76_acpi: loading out-of-tree module taints kernel.
[   66.154932] system76_acpi: module verification failed: signature and/or required key missing - tainting kernel
[   66.156251] system76: Model does not utilize this driver
[   66.217147] usbcore: registered new interface driver system76-io
[   66.292139] raid6: avx2x4   gen() 33965 MB/s
[   66.360147] raid6: avx2x4   xor() 10703 MB/s
[   66.428147] raid6: avx2x2   gen() 35626 MB/s
[   66.496149] raid6: avx2x2   xor() 23538 MB/s
[   66.564146] raid6: avx2x1   gen() 28393 MB/s
[   66.632148] raid6: avx2x1   xor() 19881 MB/s
[   66.700147] raid6: sse2x4   gen() 17430 MB/s
[   66.768148] raid6: sse2x4   xor()  9098 MB/s
[   66.836150] raid6: sse2x2   gen() 19483 MB/s
[   66.904148] raid6: sse2x2   xor() 12260 MB/s
[   66.972147] raid6: sse2x1   gen() 14737 MB/s
[   67.040147] raid6: sse2x1   xor() 10292 MB/s
[   67.040148] raid6: using algorithm avx2x2 gen() 35626 MB/s
[   67.040148] raid6: .... xor() 23538 MB/s, rmw enabled
[   67.040149] raid6: using avx2x2 recovery algorithm
[   67.040759] xor: automatically using best checksumming function   avx       
[   67.041246] async_tx: api initialized (async)
[   67.148996] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   67.299243] systemd[1]: Inserted module 'autofs4'
[   67.338928] systemd[1]: Successfully credited entropy passed from boot loader.
[   67.342314] systemd[1]: systemd 247.3-3ubuntu3.4pop0~1626806865~21.04~19f7a6d running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   67.364172] systemd[1]: Detected architecture x86-64.
[   67.400765] systemd[1]: Set hostname to <pop-os>.
[   67.604509] systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[   67.626715] systemd[1]: Queued start job for default target Graphical Interface.
[   67.632728] systemd[1]: Created slice system-modprobe.slice.
[   67.632887] systemd[1]: Created slice Cryptsetup Units Slice.
[   67.633014] systemd[1]: Created slice User and Session Slice.
[   67.633045] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   67.633118] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   67.633162] systemd[1]: Reached target User and Group Name Lookups.
[   67.633173] systemd[1]: Reached target Remote File Systems.
[   67.633179] systemd[1]: Reached target Slices.
[   67.633223] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   67.633378] systemd[1]: Listening on LVM2 poll daemon socket.
[   67.633415] systemd[1]: Listening on Syslog Socket.
[   67.633439] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   67.633519] systemd[1]: Listening on Journal Audit Socket.
[   67.633555] systemd[1]: Listening on Journal Socket (/dev/log).
[   67.633598] systemd[1]: Listening on Journal Socket.
[   67.633765] systemd[1]: Listening on udev Control Socket.
[   67.633807] systemd[1]: Listening on udev Kernel Socket.
[   67.634270] systemd[1]: Mounting Huge Pages File System...
[   67.634685] systemd[1]: Mounting POSIX Message Queue File System...
[   67.635155] systemd[1]: Mounting Kernel Debug File System...
[   67.635597] systemd[1]: Mounting Kernel Trace File System...
[   67.636386] systemd[1]: Starting Journal Service...
[   67.636493] systemd[1]: Finished Availability of block devices.
[   67.637115] systemd[1]: Starting Set the console keyboard layout...
[   67.637628] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   67.638127] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   67.638526] systemd[1]: Starting Load Kernel Module configfs...
[   67.638926] systemd[1]: Starting Load Kernel Module drm...
[   67.639439] systemd[1]: Starting Load Kernel Module fuse...
[   67.640004] systemd[1]: Started Nameserver information manager.
[   67.640073] systemd[1]: Reached target Network (Pre).
[   67.641963] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   67.643976] systemd[1]: Starting Load Kernel Modules...
[   67.644423] systemd[1]: Starting Remount Root and Kernel File Systems...
[   67.644837] systemd[1]: Starting Coldplug All udev Devices...
[   67.645275] systemd[1]: Starting Uncomplicated firewall...
[   67.646186] systemd[1]: Mounted Huge Pages File System.
[   67.646247] systemd[1]: Mounted POSIX Message Queue File System.
[   67.646296] systemd[1]: Mounted Kernel Debug File System.
[   67.646342] systemd[1]: Mounted Kernel Trace File System.
[   67.646580] systemd[1]: Finished Create list of static device nodes for the current kernel.
[   67.646701] systemd[1]: modprobe@configfs.service: Succeeded.
[   67.646853] systemd[1]: Finished Load Kernel Module configfs.
[   67.646941] systemd[1]: modprobe@fuse.service: Succeeded.
[   67.647086] systemd[1]: Finished Load Kernel Module fuse.
[   67.647716] systemd[1]: Mounting FUSE Control File System...
[   67.648185] systemd[1]: Mounting Kernel Configuration File System...
[   67.649132] systemd[1]: Mounted FUSE Control File System.
[   67.649187] systemd[1]: Mounted Kernel Configuration File System.
[   67.652152] EXT4-fs (sdc3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[   67.652723] systemd[1]: modprobe@drm.service: Succeeded.
[   67.652878] systemd[1]: Finished Load Kernel Module drm.
[   67.653073] systemd[1]: Finished Remount Root and Kernel File Systems.
[   67.656325] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   67.656342] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[   67.656877] systemd[1]: Starting Load/Save Random Seed...
[   67.657291] systemd[1]: Starting Create System Users...
[   67.657560] systemd[1]: Finished Uncomplicated firewall.
[   67.661463] lp: driver loaded but no devices found
[   67.666661] ppdev: user-space parallel port driver
[   67.668998] systemd[1]: Finished Load/Save Random Seed.
[   67.669067] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[   67.671484] systemd[1]: Finished Create System Users.
[   67.671902] systemd[1]: Starting Create Static Device Nodes in /dev...
[   67.676717] systemd[1]: Finished Create Static Device Nodes in /dev.
[   67.677422] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[   67.677709] systemd[1]: Finished Load Kernel Modules.
[   67.678163] systemd[1]: Starting Apply Kernel Variables...
[   67.680207] systemd[1]: Finished Set the console keyboard layout.
[   67.687000] systemd[1]: Finished Apply Kernel Variables.
[   67.696964] systemd[1]: Started Journal Service.
[   67.703261] systemd-journald[461]: Received client request to flush runtime journal.
[   67.735404] loop0: detected capacity change from 0 to 113544
[   67.760360] loop1: detected capacity change from 0 to 161520
[   67.796398] loop2: detected capacity change from 0 to 133320
[   67.837121] loop3: detected capacity change from 0 to 533936
[   67.847265] pstore: Using crash dump compression: deflate
[   67.847272] pstore: Registered efi as persistent store backend
[   67.877887] ccp 0000:0b:00.1: enabling device (0000 -> 0002)
[   67.878070] ccp 0000:0b:00.1: ccp: unable to access the device: you might be running a broken BIOS.
[   67.881184] loop4: detected capacity change from 0 to 66144
[   67.890605] mc: Linux media interface: v0.10
[   67.891811] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[   67.891815] RAPL PMU: hw unit of domain package 2^-16 Joules
[   67.896818] videodev: Linux video capture interface: v2.00
[   67.977416] kvm: Nested Virtualization enabled
[   67.977418] SVM: kvm: Nested Paging enabled
[   67.977428] SVM: Virtual VMLOAD VMSAVE supported
[   67.977428] SVM: Virtual GIF supported
[   67.998664] MCE: In-kernel MCE decoding enabled.
[   68.027203] nvidia: module license 'NVIDIA' taints kernel.
[   68.027205] Disabling lock debugging due to kernel taint
[   68.049111] EDAC amd64: F17h_M70h detected (node 0).
[   68.049161] EDAC amd64: Node 0: DRAM ECC disabled.
[   68.049372] pwc: Logitech/Cisco VT Camera webcam detected.
[   68.049921] pwc: Failed to set LED on/off time (-32)
[   68.049927] fbcon: Taking over console
[   68.049987] Console: switching to colour frame buffer device 160x45
[   68.051724] pwc: send_video_command error -32
[   68.051727] pwc: Failed to set video mode VGA@30 fps; return code = -32
[   68.051733] Philips webcam: probe of 5-1.1:1.0 failed with error -32
[   68.051753] usbcore: registered new interface driver Philips webcam
[   68.051774] uvcvideo: Found UVC 1.00 device Logi Webcam C920e (046d:08b6)
[   68.059187] input: Logi Webcam C920e as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.1/5-1.1:1.0/input/input18
[   68.059222] usbcore: registered new interface driver uvcvideo
[   68.059223] USB Video Class driver (1.1.1)
[   68.059790] nvidia-nvlink: Nvlink Core is being initialized, major device number 511

[   68.060277] nvidia 0000:09:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[   68.106687] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  470.57.02  Tue Jul 13 16:14:05 UTC 2021
[   68.172772] EDAC amd64: F17h_M70h detected (node 0).
[   68.172817] EDAC amd64: Node 0: DRAM ECC disabled.
[   68.173250] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  470.57.02  Tue Jul 13 16:06:24 UTC 2021
[   68.175413] intel_rapl_common: Found RAPL domain package
[   68.175416] intel_rapl_common: Found RAPL domain core
[   68.175479] [drm] [nvidia-drm] [GPU ID 0x00000900] Loading driver
[   68.179441] snd_hda_intel 0000:09:00.1: enabling device (0000 -> 0002)
[   68.179499] snd_hda_intel 0000:09:00.1: Disabling MSI
[   68.179518] snd_hda_intel 0000:09:00.1: Handle vga_switcheroo audio client
[   68.179631] snd_hda_intel 0000:0b:00.4: enabling device (0000 -> 0002)
[   68.195939] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   68.195942] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   68.195943] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   68.195945] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   68.195945] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   68.195946] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[   68.195947] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[   68.195948] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[   68.197675] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input19
[   68.197717] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input20
[   68.197753] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input21
[   68.197786] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input22
[   68.197822] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input23
[   68.197856] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input24
[   68.197885] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input25
[   68.456616] EDAC amd64: F17h_M70h detected (node 0).
[   68.456626] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input26
[   68.456659] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input27
[   68.456667] EDAC amd64: Node 0: DRAM ECC disabled.
[   68.456706] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input28
[   68.456744] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input29
[   68.456775] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input30
[   68.808563] EDAC amd64: F17h_M70h detected (node 0).
[   68.808612] EDAC amd64: Node 0: DRAM ECC disabled.
[   68.809010] FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   68.809649] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   68.840863] audit: type=1400 audit(1627794784.806:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1021 comm="apparmor_parser"
[   68.841075] audit: type=1400 audit(1627794784.806:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1023 comm="apparmor_parser"
[   68.841569] audit: type=1400 audit(1627794784.806:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1026 comm="apparmor_parser"
[   68.841571] audit: type=1400 audit(1627794784.806:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1026 comm="apparmor_parser"
[   68.842448] audit: type=1400 audit(1627794784.806:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1018 comm="apparmor_parser"
[   68.842451] audit: type=1400 audit(1627794784.806:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1018 comm="apparmor_parser"
[   68.842453] audit: type=1400 audit(1627794784.806:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1018 comm="apparmor_parser"
[   68.843516] audit: type=1400 audit(1627794784.806:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=1025 comm="apparmor_parser"
[   68.844916] audit: type=1400 audit(1627794784.810:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1029 comm="apparmor_parser"
[   68.845482] audit: type=1400 audit(1627794784.810:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1020 comm="apparmor_parser"
[   68.932545] EDAC amd64: F17h_M70h detected (node 0).
[   68.932591] EDAC amd64: Node 0: DRAM ECC disabled.
[   68.936184] Adding 4193784k swap on /dev/mapper/cryptswap.  Priority:-2 extents:1 across:4193784k SSFS
[   69.032557] EDAC amd64: F17h_M70h detected (node 0).
[   69.032603] EDAC amd64: Node 0: DRAM ECC disabled.
[   69.065981] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:09:00.0 on minor 0
[   69.075301] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
[   69.077437] nvidia-uvm: Loaded the UVM driver, major device number 509.
[   69.168581] EDAC amd64: F17h_M70h detected (node 0).
[   69.168629] EDAC amd64: Node 0: DRAM ECC disabled.
[   69.272156] Generic FE-GE Realtek PHY r8169-800:00: attached PHY driver (mii_bus:phy_addr=r8169-800:00, irq=IGNORE)
[   69.296555] EDAC amd64: F17h_M70h detected (node 0).
[   69.296604] EDAC amd64: Node 0: DRAM ECC disabled.
[   69.472225] r8169 0000:08:00.0 enp8s0: Link is Down
[   69.617613] loop5: detected capacity change from 0 to 8
[   69.676538] EDAC amd64: F17h_M70h detected (node 0).
[   69.676581] EDAC amd64: Node 0: DRAM ECC disabled.
[   69.784551] EDAC amd64: F17h_M70h detected (node 0).
[   69.784594] EDAC amd64: Node 0: DRAM ECC disabled.
[   69.872563] EDAC amd64: F17h_M70h detected (node 0).
[   69.872608] EDAC amd64: Node 0: DRAM ECC disabled.
[   69.960490] EDAC amd64: F17h_M70h detected (node 0).
[   69.960534] EDAC amd64: Node 0: DRAM ECC disabled.
[   72.465908] rfkill: input handler disabled
[   72.542961] ------------[ cut here ]------------
[   72.542963] WARNING: CPU: 2 PID: 1752 at /var/lib/dkms/nvidia/470.57.02/build/nvidia-drm/nvidia-drm-drv.c:574 nv_drm_master_set+0x27/0x30 [nvidia_drm]
[   72.542970] Modules linked in: nvidia_uvm(POE) dm_crypt nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg soundwire_intel intel_rapl_msr nvidia_drm(POE) soundwire_generic_allocation intel_rapl_common soundwire_cadence nvidia_modeset(POE) snd_hda_codec snd_hda_core snd_hwdep soundwire_bus snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine nvidia(POE) pwc uvcvideo snd_pcm edac_mce_amd snd_seq_midi videobuf2_vmalloc snd_seq_midi_event videobuf2_memops kvm_amd snd_rawmidi videobuf2_v4l2 kvm snd_seq videobuf2_common videodev drm_kms_helper snd_seq_device mc rapl input_leds snd_timer cec rc_core snd fb_sys_fops syscopyarea sysfillrect sysimgblt ccp soundcore k10temp wmi_bmof efi_pstore mac_hid sch_fq_codel msr parport_pc ppdev lp parport drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear system76_io(OE)
[   72.543006]  system76_acpi(OE) hid_glorious hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd r8169 glue_helper ahci xhci_pci gpio_amdpt i2c_piix4 realtek libahci xhci_pci_renesas wmi gpio_generic
[   72.543016] CPU: 2 PID: 1752 Comm: gst-plugin-scan Tainted: P           OE     5.11.0-7620-generic #21~1626191760~21.04~55de9c3-Ubuntu
[   72.543018] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P6.40 08/31/2020
[   72.543019] RIP: 0010:nv_drm_master_set+0x27/0x30 [nvidia_drm]
[   72.543022] Code: f0 e8 eb 0f 1f 44 00 00 55 48 8b 47 48 48 8b 78 20 48 8b 05 bb 6c 00 00 48 89 e5 48 8b 40 28 e8 0f 70 25 ec 84 c0 74 02 5d c3 <0f> 0b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 41 56
[   72.543023] RSP: 0018:ffffa905884fbb80 EFLAGS: 00010246
[   72.543024] RAX: 0000000000000000 RBX: ffff95c644299000 RCX: 0000000000000008
[   72.543026] RDX: ffffffffc2f09ed8 RSI: 0000000000000292 RDI: ffffffffc2f09ea0
[   72.543027] RBP: ffffa905884fbb80 R08: 0000000000000008 R09: ffffa905884fbb68
[   72.543027] R10: 0000000000000000 R11: ffff95c649d586da R12: ffff95c647434180
[   72.543028] R13: ffff95c652429800 R14: 0000000000000000 R15: ffff95c652429800
[   72.543029] FS:  00007f2c8a71f740(0000) GS:ffff95c94e880000(0000) knlGS:0000000000000000
[   72.543030] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   72.543031] CR2: 00007f2c892a4000 CR3: 000000010ae82000 CR4: 0000000000350ee0
[   72.543032] Call Trace:
[   72.543034]  drm_new_set_master+0x7e/0x100 [drm]
[   72.543049]  drm_master_open+0x6e/0xa0 [drm]
[   72.543062]  drm_open+0xf8/0x250 [drm]
[   72.543075]  drm_stub_open+0xba/0x140 [drm]
[   72.543089]  chrdev_open+0xf7/0x220
[   72.543092]  ? cdev_device_add+0x90/0x90
[   72.543094]  do_dentry_open+0x156/0x370
[   72.543096]  vfs_open+0x2d/0x30
[   72.543097]  do_open+0x1c3/0x340
[   72.543099]  path_openat+0x10a/0x1d0
[   72.543101]  do_filp_open+0x8c/0x130
[   72.543103]  ? __check_object_size+0x1c/0x20
[   72.543104]  do_sys_openat2+0x9b/0x150
[   72.543106]  __x64_sys_openat+0x56/0x90
[   72.543108]  do_syscall_64+0x38/0x90
[   72.543109]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   72.543111] RIP: 0033:0x7f2c8abc98db
[   72.543113] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 2b 0c 25
[   72.543114] RSP: 002b:00007ffd0429b880 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[   72.543115] RAX: ffffffffffffffda RBX: 00005630faf7a120 RCX: 00007f2c8abc98db
[   72.543116] RDX: 0000000000080002 RSI: 00005630faf7ed40 RDI: 00000000ffffff9c
[   72.543116] RBP: 00005630faf7ed40 R08: 00007f2c892844f0 R09: 00005630faf7f000
[   72.543117] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080002
[   72.543118] R13: 00007f2c896a1120 R14: 00005630faf7d900 R15: 00007f2c896837a9
[   72.543119] ---[ end trace 952bffe484565c89 ]---
[   72.751177] r8169 0000:08:00.0 enp8s0: Link is Up - 1Gbps/Full - flow control off
[   72.751189] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
[   89.820527] usb 5-1.2: new full-speed USB device number 6 using xhci_hcd
[   89.995999] usb 5-1.2: New USB device found, idVendor=04d9, idProduct=0356, bcdDevice= 1.10
[   89.996004] usb 5-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[   89.996005] usb 5-1.2: Product: Ducky Keyboard
[   89.996006] usb 5-1.2: Manufacturer: DuckyChannel International Co., Ltd.
[   90.132579] input: DuckyChannel International Co., Ltd. Ducky Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.0/0003:04D9:0356.0009/input/input31
[   90.192735] hid-generic 0003:04D9:0356.0009: input,hidraw5: USB HID v1.11 Keyboard [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input0
[   90.198164] hid-generic 0003:04D9:0356.000A: hiddev2,hidraw6: USB HID v1.11 Device [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input1
[   90.202164] input: DuckyChannel International Co., Ltd. Ducky Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.000B/input/input32
[   90.260746] input: DuckyChannel International Co., Ltd. Ducky Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.000B/input/input33
[   90.260806] input: DuckyChannel International Co., Ltd. Ducky Keyboard Mouse as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.000B/input/input34
[   90.260899] input: DuckyChannel International Co., Ltd. Ducky Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.000B/input/input35
[   90.260977] hid-generic 0003:04D9:0356.000B: input,hidraw7: USB HID v1.11 Mouse [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input2
[   92.988924] rfkill: input handler enabled
[   93.229989] usb 5-1.1: reset high-speed USB device number 4 using xhci_hcd
[   96.707717] ------------[ cut here ]------------
[   96.707719] WARNING: CPU: 11 PID: 2799 at /var/lib/dkms/nvidia/470.57.02/build/nvidia-drm/nvidia-drm-drv.c:574 nv_drm_master_set+0x27/0x30 [nvidia_drm]
[   96.707727] Modules linked in: nvidia_uvm(POE) dm_crypt nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg soundwire_intel intel_rapl_msr nvidia_drm(POE) soundwire_generic_allocation intel_rapl_common soundwire_cadence nvidia_modeset(POE) snd_hda_codec snd_hda_core snd_hwdep soundwire_bus snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine nvidia(POE) pwc uvcvideo snd_pcm edac_mce_amd snd_seq_midi videobuf2_vmalloc snd_seq_midi_event videobuf2_memops kvm_amd snd_rawmidi videobuf2_v4l2 kvm snd_seq videobuf2_common videodev drm_kms_helper snd_seq_device mc rapl input_leds snd_timer cec rc_core snd fb_sys_fops syscopyarea sysfillrect sysimgblt ccp soundcore k10temp wmi_bmof efi_pstore mac_hid sch_fq_codel msr parport_pc ppdev lp parport drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear system76_io(OE)
[   96.707763]  system76_acpi(OE) hid_glorious hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd r8169 glue_helper ahci xhci_pci gpio_amdpt i2c_piix4 realtek libahci xhci_pci_renesas wmi gpio_generic
[   96.707773] CPU: 11 PID: 2799 Comm: gst-plugin-scan Tainted: P        W  OE     5.11.0-7620-generic #21~1626191760~21.04~55de9c3-Ubuntu
[   96.707775] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P6.40 08/31/2020
[   96.707776] RIP: 0010:nv_drm_master_set+0x27/0x30 [nvidia_drm]
[   96.707779] Code: f0 e8 eb 0f 1f 44 00 00 55 48 8b 47 48 48 8b 78 20 48 8b 05 bb 6c 00 00 48 89 e5 48 8b 40 28 e8 0f 70 25 ec 84 c0 74 02 5d c3 <0f> 0b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 41 56
[   96.707780] RSP: 0018:ffffa9058870fb80 EFLAGS: 00010246
[   96.707781] RAX: 0000000000000000 RBX: ffff95c6a94af400 RCX: 0000000000000008
[   96.707782] RDX: ffffffffc2f09ed8 RSI: 0000000000000292 RDI: ffffffffc2f09ea0
[   96.707783] RBP: ffffa9058870fb80 R08: 0000000000000008 R09: ffffa9058870fb68
[   96.707784] R10: 0000000000000000 R11: ffff95c649d586da R12: ffff95c64f68bcc0
[   96.707785] R13: ffff95c652429800 R14: 0000000000000000 R15: ffff95c652429800
[   96.707786] FS:  00007f464c8ca740(0000) GS:ffff95c94eac0000(0000) knlGS:0000000000000000
[   96.707787] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   96.707788] CR2: 0000559e6a748560 CR3: 0000000169534000 CR4: 0000000000350ee0
[   96.707789] Call Trace:
[   96.707791]  drm_new_set_master+0x7e/0x100 [drm]
[   96.707806]  drm_master_open+0x6e/0xa0 [drm]
[   96.707819]  drm_open+0xf8/0x250 [drm]
[   96.707832]  drm_stub_open+0xba/0x140 [drm]
[   96.707846]  chrdev_open+0xf7/0x220
[   96.707850]  ? cdev_device_add+0x90/0x90
[   96.707851]  do_dentry_open+0x156/0x370
[   96.707853]  vfs_open+0x2d/0x30
[   96.707855]  do_open+0x1c3/0x340
[   96.707856]  path_openat+0x10a/0x1d0
[   96.707858]  do_filp_open+0x8c/0x130
[   96.707860]  ? __check_object_size+0x1c/0x20
[   96.707862]  do_sys_openat2+0x9b/0x150
[   96.707863]  __x64_sys_openat+0x56/0x90
[   96.707865]  do_syscall_64+0x38/0x90
[   96.707867]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   96.707869] RIP: 0033:0x7f464cd748db
[   96.707870] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 2b 0c 25
[   96.707871] RSP: 002b:00007ffed6dd41c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[   96.707873] RAX: ffffffffffffffda RBX: 0000559e6a741120 RCX: 00007f464cd748db
[   96.707873] RDX: 0000000000080002 RSI: 0000559e6a746520 RDI: 00000000ffffff9c
[   96.707874] RBP: 0000559e6a746520 R08: 00007f464b60b4f0 R09: 0000559e6a7457b5
[   96.707875] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080002
[   96.707875] R13: 00007f464b4ee120 R14: 0000559e6a6e8390 R15: 00007f464b4d07a9
[   96.707877] ---[ end trace 952bffe484565c8a ]---
emma@pop-os:~$ 

I noticed my keyboard was getting in the way a bit so here's the lsusb -v for it
 

Bus 005 Device 006: ID 04d9:0356 Holtek Semiconductor, Inc. Ducky Keyboard
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x04d9 Holtek Semiconductor, Inc.
  idProduct          0x0356 
  bcdDevice            1.10
  iManufacturer           3 DuckyChannel International Co., Ltd.
  iProduct                1 Ducky Keyboard
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x005b
    bNumInterfaces          3
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      64
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              2 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      34
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     203
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1

I'm also unsure why it's taking 30 seconds for the kernel to work after configuring one of my drives for UDMA/133.

[Sauron]

I'm not sure what you mean regarding the kernel taking too long to boot... if you just mean the system boots slowly, try checking your systemd services:

systemd-analyze blame

 

[zemm]

2 hours ago, Sauron said:

I'm not sure what you mean regarding the kernel taking too long to boot... if you just mean the system boots slowly, try checking your systemd services:

systemd-analyze blame

 

Quote

3.664s plymouth-quit-wait.service
3.143s smartmontools.service
3.028s dev-sdc3.device
826ms udisks2.service
826ms snapd.service
808ms fwupd.service
527ms networkd-dispatcher.service
438ms accounts-daemon.service
364ms upower.service
262ms system76-power.service
261ms mnt-HDD.mount
232ms geoclue.service
227ms dev-loop1.device
217ms dev-loop0.device
203ms snap-snapd-12704.mount
196ms systemd-journal-flush.service
191ms avahi-daemon.service
189ms polkit.service
189ms NetworkManager.service
183ms snap-kde\x2dframeworks\x2d5\x2dcore18-32.mount
182ms dev-loop2.device
176ms switcheroo-control.service
170ms thermald.service
170ms systemd-logind.service
168ms wpa_supplicant.service
167ms dev-loop3.device
145ms ModemManager.service
139ms snap-core18-2074.mount
136ms snap-gtk\x2dcommon\x2dthemes-1515.mount
124ms mnt-Shit.mount
124ms networking.service
111ms snap-flameshot-135.mount
108ms apparmor.service
106ms lvm2-monitor.service
 99ms gpu-manager.service
 90ms dev-loop4.device
 84ms rsyslog.service
 81ms secureboot-db.service
 80ms user@1000.service
 77ms cups.service
 68ms apport.service
 66ms systemd-udev-trigger.service
 65ms systemd-resolved.service
 64ms systemd-cryptsetup@cryptswap.service
 63ms dev-mapper-cryptswap.swap
 61ms systemd-journald.service
 60ms gdm.service
 58ms systemd-udevd.service
 51ms e2scrub_reap.service
 41ms keyboard-setup.service
 39ms systemd-modules-load.service
 37ms systemd-timesyncd.service
 33ms systemd-tmpfiles-setup.service
 33ms snapd.seeded.service
 29ms plymouth-start.service
 24ms packagekit.service
 24ms snapd.apparmor.service
 19ms lm-sensors.service
 19ms colord.service
 17ms modprobe@drm.service
 15ms nvidia-persistenced.service
 13ms pppd-dns.service
 13ms systemd-sysusers.service
 12ms plymouth-read-write.service
 12ms dev-hugepages.mount
 11ms dev-mqueue.mount
 11ms systemd-random-seed.service
 11ms sys-kernel-debug.mount
 10ms resolvconf-pull-resolved.service
 10ms sys-kernel-tracing.mount
 10ms systemd-sysctl.service
  9ms kmod-static-nodes.service
  8ms modprobe@configfs.service
  7ms rtkit-daemon.service
  7ms modprobe@fuse.service
  7ms systemd-remount-fs.service
  7ms systemd-update-utmp.service
  6ms ufw.service
  6ms systemd-tmpfiles-setup-dev.service
  6ms boot-efi.mount
  5ms user-runtime-dir@1000.service
  5ms alsa-restore.service
  5ms ifupdown-pre.service
  4ms recovery.mount
  4ms console-setup.service
  3ms systemd-user-sessions.service
  2ms systemd-update-utmp-runlevel.service
  1ms finalrd.service
  1ms sys-fs-fuse-connections.mount
  1ms setvtrgb.service
  1ms snapd.socket
  1ms sys-kernel-config.mount
 50us blk-availability.service
 

Yesterday I checked systemd-analyze and everything but the kernel was booting fast. Last time I checked it was around a minute. Now it's 36 seconds.

$ systemd-analyze
Startup finished in 10.735s (firmware) + 584ms (loader) + 36.550s (kernel) + 7.410s (userspace) = 55.280s 
graphical.target reached after 7.406s in userspace

 

[Sauron]

6 minutes ago, zemm said:

 

seems about right... do you have any peripherals that might be taking a while to respond?

[zemm]

1 minute ago, Sauron said:

seems about right... do you have any peripherals that might be taking a while to respond?

Like I said earlier, it might be my keyboard, but it magically seems better now.

[zemm]

3 minutes ago, zemm said:

Like I said earlier, it might be my keyboard, but it magically seems better now.

Actually I fixed one of my drives, my keyboard is still causing me to wait a while.

[    8.660333] hid-generic 0003:04D9:0356.0008: input,hidraw7: USB HID v1.11 Mouse [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input2
[   34.336208] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)