need air cooler suggestion

[Momenaut]

I just installed a new 9700k system and used my old h212+ in the build but hit 94 degrees in the 3d mark time spy cpu benchmark which is too hot for my liking. I'm wondering what kind of upgrade to my temps I can expect with a better cooler and which ones will fit in my case (antec one.)

[wONKEyeYEs]

35 minutes ago, Momenaut said:

antec one

Dude, there's more than one antec case.

Get an NH-D15.

[Momenaut]

4 hours ago, wONKEyeYEs said:

Dude, there's more than one antec case.

Get an NH-D15.

rofl it's literally called antec "one"

[freeagent]

That was a lot funnier than it should have been

[Tan3l6]

If you want cheap dual tower, then maybe Gelid Phantom Black.

Edit: maybe too high...?

Then Scythe Fuma 2

[wONKEyeYEs]

I found the One!

 

Says you have a Max CPU Cooler Height of155 mm.

https://www.newegg.com/black-antec-gaming-series-atx-mid-tower/p/N82E16811129181

 

I had the be quiet! Dark Rock TF on a 6700k and it worked well.

https://www.bequiet.com/en/cpucooler/572

[WoodenMarker]

Is the cpu running at stock or are you oc'ing? What's the core voltage at under load?

[Momenaut]

36 minutes ago, WoodenMarker said:

Is the cpu running at stock or are you oc'ing? What's the core voltage at under load?

I'm just running stock.

[WoodenMarker]

44 minutes ago, Momenaut said:

I'm just running stock.

That's strangely high for stock. Are you running default motherboard settings? If so, Multicore Enhancement may be enabled which is basically an auto-oc. Make sure that's disabled if you're planning to run at stock. 

Have you tried reseating the cooler?

[Momenaut]

54 minutes ago, WoodenMarker said:

That's strangely high for stock. Are you running default motherboard settings? If so, Multicore Enhancement may be enabled which is basically an auto-oc. Make sure that's disabled if you're planning to run at stock. 

Have you tried reseating the cooler?

I was hoping not to have to reseat it. I shelled out for kryonaut and it's kind of a one shot go. I plan to run turbo and all that just no manual oc. Only settings I've touched are turning off the c states.

[WoodenMarker]

10 minutes ago, Momenaut said:

I was hoping not to have to reseat it. I shelled out for kryonaut and it's kind of a one shot go. I plan to run turbo and all that just no manual oc. Only settings I've touched are turning off the c states.

An order of Kryonaut should be plenty for multiple applications. Did you use the entire tube?

What motherboard are you using? Did you check and see if there's such a setting enabled?

Turbo boosting is part of stock clocks but may be enhanced / raised through motherboard settings.