Small 1/2 3/4 Tubing Bend--Tips?

[TheNinjaNextDor]

Hi! I am on the last two runs in my tubing and can't seem to get it on both ends. Any suggestion as to what I should do? I have already soaked them in water and used pliers. I have any angle fitting except thirty I can try with on both.       Thanks!

[AustinKZombie]

Order some right angle or 45 degree angle fittings my best idea.

[TheNinjaNextDor]

Order some right angle or 45 degree angle fittings my best idea.

I have those on there, but I just can't get it much straighter than it is!

 

I also have one straight one and two 90 degree fittings.

 

BTW: Higher quality pics and all that in my build log, link in sig.

[AustinKZombie]

So you can either play with tube lengths or try get a couple fittings to line up better with the radiator.

[helping]

in all seriousness a 45 degree with a barb and slightly smaller tubing here might work better.

[TheNinjaNextDor]

picture

Thanks. Be right back, going to try that out and see how it is.

[AustinKZombie]

Can I get another agnle shot of the issue hard to tell exactly what is wrong.

[helping]

Thanks. Be right back, going to try that out and see how it is.

alright, LMK

I would suggest changing the ink to black first, it would look awful with that stray red in there.

and why is this PC on the floor? They should be at eye level.

[TheNinjaNextDor]

alright, LMK

I would suggest changing the ink to black first, it would look awful with that stray red in there.

and why is this PC on the floor? They should be at eye level.

lol i just ordered red so no going back.

It's there just for me to work on it.

[TheNinjaNextDor]

@helping

Got it

Now the bottom one...

[VSG]

Just get some dual/triple rotaries and call it a day without tubing.

[paulstung]

Try a 30 degree fitting on the res and just a regular fitting on the rad, or the other way around.