PC wont boot to Windows after PSU swap.

[Newblesse Obblige]

im using my phone for posting this so please be patient with me

 

I just bought a new PSU(Corsair CV450) and swap it immediately my C4 bomb(generic PSU). I plugged all of the necessary connectors for the CPU(the 4pin cus my motherboard is a H110M and the 24pin) and my drives and it turned on but won't boot to Windows. I double checked my SSD and the connector is fine. what could be the problem?

[leclod]

any gpu with power connectors ?

[Newblesse Obblige]

4 minutes ago, leclod said:

any gpu with power connectors ?

im using a GTX 1050 Ti with no external power needed

 

[leclod]

you've got the boot screen or is it off ?

[Newblesse Obblige]

Just now, leclod said:

you've got the boot screen or is it off ?

the monitor cant detect anything but the fans from the PSU, CPU cooler and GPU are running plus my HDD is also running. Mobo LED inside (the one located beliw the audio connectors in the motherboard) are turned on

 

[leclod]

Plug the other psu back in, if it works, return the corsair ?

[Newblesse Obblige]

2 minutes ago, leclod said:

Plug the other psu back in, if it works, return the corsair ?

yikes, i wish it isn't DoA. I don't want to put my C4 bomb in there. ill update soon

[Newblesse Obblige]

19 minutes ago, leclod said:

Plug the other psu back in, if it works, return the corsair ?

Same problem with old PSU

[leclod]

hdmi or displayport ?

[Newblesse Obblige]

5 minutes ago, leclod said:

hdmi or displayport ?

DVI

 

[leclod]

Is your monitor ON ?

Do you have an igpu ?

[Newblesse Obblige]

Just now, leclod said:

Is your monitor ON ?

Do you have an igpu ?

yes and yes, im using i5 6400 but i set the primary GPU to PCIe

[leclod]

can you try to boot with igpu ?

[Newblesse Obblige]

4 minutes ago, leclod said:

can you try to boot with igpu ?

i tried to use a Dsub cable cus my monitor and motherboard has one and the onboard Dvi seems not working but nothing pops out

 

[leclod]

I

4 minutes ago, Newblesse Obblige said:

i tried to use a Dsub cable cu my monitor has one and the onboard Dvi seems not working but nothing pops out

 

I hardly understood that. You mean VGA cable ?

It'd be nice to try another monitor.

Why did you change that psu in the first place (you bitch ) ?

[Newblesse Obblige]

4 minutes ago, leclod said:

I

I hardly understood that. You mean VGA cable ?

It'd be nice to try another monitor.

Why did you change that psu in the first place (you bitch) ?

Yes it is VGA.

 

I dont want that C4 bomb running again. it keeps me up at night. 

But seriously, i heard something in it and also i will put more drives and to my new future PC(upgrading little by little) becuse the C4 bomb lack SATA connectors for some reason

[leclod]

Reset bios, retry booting with both grafik outputs ?

Reseat connectors, ram, gpu... ?

Buy a new, modern pc ?

(450W is a little short for future)

[Newblesse Obblige]

1 minute ago, leclod said:

Reset bios, retry booting with both grafik outputs ?

Reseat connectors, ram, gpu... ?

Buy a new modern pc ?

how do reset the bios?

 

[leclod]

[Newblesse Obblige]

15 minutes ago, leclod said:

my motherboard is an Asus H110m-k

is it still the same?

 

 

[leclod]

[Newblesse Obblige]

8 minutes ago, leclod said:

so i should continue to short the 2 pins until i get to the bios?

 

[leclod]

no, you don't continue, you execute in the order

[Newblesse Obblige]

16 minutes ago, leclod said:

no, you don't continue, you execute in the order

i did in order but it seems it doesn't work. even if i removed the battery like the manual said

[leclod]

I'm out of ideas