Molex Fan Maiboard Control

[ArmasF32]

I have a msi x570 A pro Motherboard, and a case from enermax. The 5 fans are controlled (or rather not controled) with the molex connector. So they always run on 100%. To get control, i got told to buy a 3 pin to molex adapter to plug into the mainbaord (as far as i know the shouldn't be a problem connecting a 3 pin connector to a 4 pin header). The fans draw "DC 12V (0,13A) / 5V (0,68A)" and i was wondering, if i would be able to connect all 5 of my fans to one port?

 

Thx for y'alls help

[thrasher_565]

2 hours ago, ArmasF32 said:

I have a msi x570 A pro Motherboard, and a case from enermax. The 5 fans are controlled (or rather not controled) with the molex connector. So they always run on 100%. To get control, i got told to buy a 3 pin to molex adapter to plug into the mainbaord (as far as i know the shouldn't be a problem connecting a 3 pin connector to a 4 pin header). The fans draw "DC 12V (0,13A) / 5V (0,68A)" and i was wondering, if i would be able to connect all 5 of my fans to one port?

 

Thx for y'alls help

https://www.amazon.ca/2-Pack-Pin-Molex-Splitter-Cable/dp/B07F354TP3/ref=sr_1_6?dchild=1&keywords=molex+to+pwm&qid=1615649999&sr=8-6

 

ya i would do like 2-3 fans per hesder

[tdkid]

this one i know for a fact is yes its possible but not very wise. i know this because that is how my case it, all the fans are molexl except one to connect to the motherboard and it sucks.

[ArmasF32]

I tried it, and it doesnt seem to be bad, way quieter then before. Also, nothing did burn/smoke thankfully...