Jump to content

Computer starts then shuts down.

youngMata
By youngMata
in Troubleshooting
 Share
Go to solution Solved by MadAnt250,
25 minutes ago, youngMata said:

yes and that is because there is a closed spot on the plug itself and the plug on the left has like half of the actual plug spots 

You have the connectors in the wrong spots. "F panel" goes on the left side of the 20-3 pin, and the "audio 10-1 pin" is located somewhere else by the left side of the board.

Posted

I was just trying to put an ssd in my computer when i though i would do some cable managing. Then i plugged my computer back in and when i flipped the switch to the power supply it immediately turns on then turns off. The power button is not working and I made sure that all the connections were secure. It receives power just fine and everything is plugged in the right spots i think. Except i’m not sure about the bottom plug ins. i’ll include them in a picture. image.thumb.jpg.502edee478c40f0c38bfa8fe96b90610.jpgjo

Link to comment
https://linustechtips.com/topic/1310229-computer-starts-then-shuts-down/
Share on other sites
Link to post
Share on other sites
Posted
18 minutes ago, youngMata said:

yes and that is because there is a closed spot on the plug itself and the plug on the left has like half of the actual plug spots 

I think you have something wrong. What board do you have?

Gaming With a 4:3 CRT

System specs below

 

CPU: AMD Ryzen 7 5700X with a Noctua NH-U9S cooler 
Motherboard: Gigabyte B450 Aorus M (Because it was cheap)
RAM: 32GB (4 x 8GB) Corsair Vengance LPX 3200Mhz CL16
GPU: EVGA GTX 980 Ti SC Blower Card
HDD: 7200RPM TOSHIBA DT01ACA100 1TB, External HDD: 5400RPM 2TB WD My Passport
SSD: 1tb Samsung 970 evo m.2 nvme
PSU: Corsair CX650M
Displays: ViewSonic VA2012WB LCD 1680x1050p @ 75Hz
Gateway VX920 CRT: 1600x1200@75Hz, 1200x900@100Hz, 960x720@125Hz, 800x600@140Hz
Gateway VX900 CRT: 1600x1200@75Hz, 1200x900@100Hz, 960x720@120Hz (Can be pushed to 175Hz)
 
Keyboard: Thermaltake eSPORTS MEKA PRO with Cherry MX Red switches
Link to post
Share on other sites
Posted
  • Solution
25 minutes ago, youngMata said:

yes and that is because there is a closed spot on the plug itself and the plug on the left has like half of the actual plug spots 

You have the connectors in the wrong spots. "F panel" goes on the left side of the 20-3 pin, and the "audio 10-1 pin" is located somewhere else by the left side of the board.

Gaming With a 4:3 CRT

System specs below

 

CPU: AMD Ryzen 7 5700X with a Noctua NH-U9S cooler 
Motherboard: Gigabyte B450 Aorus M (Because it was cheap)
RAM: 32GB (4 x 8GB) Corsair Vengance LPX 3200Mhz CL16
GPU: EVGA GTX 980 Ti SC Blower Card
HDD: 7200RPM TOSHIBA DT01ACA100 1TB, External HDD: 5400RPM 2TB WD My Passport
SSD: 1tb Samsung 970 evo m.2 nvme
PSU: Corsair CX650M
Displays: ViewSonic VA2012WB LCD 1680x1050p @ 75Hz
Gateway VX920 CRT: 1600x1200@75Hz, 1200x900@100Hz, 960x720@125Hz, 800x600@140Hz
Gateway VX900 CRT: 1600x1200@75Hz, 1200x900@100Hz, 960x720@120Hz (Can be pushed to 175Hz)
 
Keyboard: Thermaltake eSPORTS MEKA PRO with Cherry MX Red switches
Link to post
Share on other sites
Posted
5 minutes ago, youngMata said:

I have the Asus b450-f 

https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_STRIX_B450-E_GAMING/E14929_ROG_STRIX_B450-E_GAMING_UM_V2_WEB.pdf

Gaming With a 4:3 CRT

System specs below

 

CPU: AMD Ryzen 7 5700X with a Noctua NH-U9S cooler 
Motherboard: Gigabyte B450 Aorus M (Because it was cheap)
RAM: 32GB (4 x 8GB) Corsair Vengance LPX 3200Mhz CL16
GPU: EVGA GTX 980 Ti SC Blower Card
HDD: 7200RPM TOSHIBA DT01ACA100 1TB, External HDD: 5400RPM 2TB WD My Passport
SSD: 1tb Samsung 970 evo m.2 nvme
PSU: Corsair CX650M
Displays: ViewSonic VA2012WB LCD 1680x1050p @ 75Hz
Gateway VX920 CRT: 1600x1200@75Hz, 1200x900@100Hz, 960x720@125Hz, 800x600@140Hz
Gateway VX900 CRT: 1600x1200@75Hz, 1200x900@100Hz, 960x720@120Hz (Can be pushed to 175Hz)
 
Keyboard: Thermaltake eSPORTS MEKA PRO with Cherry MX Red switches
Link to post
Share on other sites
Posted
16 minutes ago, youngMata said:

fuck yeah. Thank you so much. what’s funny is i swear to god i plugged them back into the same spot i found them from when i put it together 2 years ago. 

Good to hear, just refer to the manual when you need to know the right location of the connections.

Sometimes we learn by screwing up. 😉

Gaming With a 4:3 CRT

System specs below

 

CPU: AMD Ryzen 7 5700X with a Noctua NH-U9S cooler 
Motherboard: Gigabyte B450 Aorus M (Because it was cheap)
RAM: 32GB (4 x 8GB) Corsair Vengance LPX 3200Mhz CL16
GPU: EVGA GTX 980 Ti SC Blower Card
HDD: 7200RPM TOSHIBA DT01ACA100 1TB, External HDD: 5400RPM 2TB WD My Passport
SSD: 1tb Samsung 970 evo m.2 nvme
PSU: Corsair CX650M
Displays: ViewSonic VA2012WB LCD 1680x1050p @ 75Hz
Gateway VX920 CRT: 1600x1200@75Hz, 1200x900@100Hz, 960x720@125Hz, 800x600@140Hz
Gateway VX900 CRT: 1600x1200@75Hz, 1200x900@100Hz, 960x720@120Hz (Can be pushed to 175Hz)
 
Keyboard: Thermaltake eSPORTS MEKA PRO with Cherry MX Red switches
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×