Sending mic and receiving call audio to iPhone over Bluetooth

[ninbura]

Been on the search for a way to send my SM7B mic to my iPhone over Bluetooth so I can take calls without taking my CIEMs out and physically putting my Phone up to my head, and or switching to a Bluetooth headset.

Essentially the device would need a mono input and a mono output (but it would be awesome if the output was stereo), where the input is sent back to the phone as if it were the input on a Bluetooth headset and the output was sent back to my interface / mixer so I could hear the calls at the very least. Would be most preferable if the device, like any headset, auto switched to headset mode so I could use the device as a standard Bluetooth adapter to listen to music and such until I take a call. Though I'm really not getting my hopes up on that last part.

The only device I've been able to find with even a similar feature set is the JK Audio BlueDriver-M3, but there are some major caveats. The device was manufactured over a decade ago, uses Bluetooth 2.0, has a mono output, requires external power for continuous use despite using an XLR connection (why doesn't it convert phantom power??), has a physical switch for headset mode (my interface isn't at arms reach, it's in a rack 6 feet away under my desk), and costs $200.

I'd think that someone out there would be making something like this that isn't 10 years old with Bluetooth 4.0 / 5.0, but I can't seem to find it. All it would need to be is a Bluetooth receiver / transmitter that can act as a headset with a line in and a line out, seems weird that I can't find anything other than this JK Audio BlueDriver-M3.

[sub68]

out of mixer head phones output you could put a BT adapter

https://www.amazon.com/TaoTronics-Bluetooth-Transmitter-Receiver-Simultaneously/dp/B01EHSX28M

[ninbura]

1 minute ago, sub68 said:

out of mixer head phones output you could put a BT adapter

https://www.amazon.com/TaoTronics-Bluetooth-Transmitter-Receiver-Simultaneously/dp/B01EHSX28M

This doesn't allow for 2 way audio.

[sub68]

3 minutes ago, Ninbura said:

This doesn't allow for 2 way audio.

I can't think of a two way system for BT