1M strip enough for 350D?

[Trail Mixorz]

I'm not sure how big one meter is, but will it fit all the way around the inside of a corsair 350d? I'm looking at buying this with a molex adapter off ebay. Jk comes with a molex adapter already lol

 

http://www.newegg.com/Product/Product.aspx?Item=N82E16811994051

[CtW]

Yup; it should be fine. 

[TheNinjaNextDor]

Get icemodz leds and a control box. Much better.

[Trail Mixorz]

Get icemodz leds and a control box. Much better.

can I get a link?

[TheNinjaNextDor]

can I get a link?

http://www.icemodz.com

If you need to know what to buy just ask.

There are controller/strip packages and individual stuff.

http://www.icemodz.com/webshop/#!/~/product/category=5346676&id=22177940

[Trail Mixorz]

http://www.icemodz.com

If you need to know what to buy just ask.

There are controller/strip packages and individual stuff.

I'm on the webstore and I can't find which one you're talking about. But I do see a few rgb led ones

[TheNinjaNextDor]

I'm on the webstore and I can't find which one you're talking about. But I do see a few rgb led ones

I edited it into the post above oops

http://www.icemodz.com/webshop/#!/~/product/category=5346676&id=22177940

[Trail Mixorz]

I edited it into the post above oops

http://www.icemodz.com/webshop/#!/~/product/category=5346676&id=22177940

gotcha, I think the 100cm should be good right?

[TheNinjaNextDor]

gotcha, I think the 100cm should be good right?

You dont need nearly that much. I would get enough to go on the top of your case and shine down and maybe a strip for the bottom. I got a 60cm strip for my 750D and it goes perfectly across the top. I would get 60 or 45 and cut them to size.

[Trail Mixorz]

You dont need nearly that much. I would get enough to go on the top of your case and shine down and maybe a strip for the bottom. I got a 60cm strip for my 750D and it goes perfectly across the top. I would get 60 or 45 and cut them to size.

I want it to go pretty much all the way around the inside of the case. So is 100 not enough for me?

[TheNinjaNextDor]

I want it to go pretty much all the way around the inside of the case. So is 100 not enough for me?

That would probably be enough.

I would suggest getting 2 strips and fitting them to sit in the bottom and top of the case, shining up and down. It will look much better.

[Trail Mixorz]

That would probably be enough.

I would suggest getting 2 strips and fitting them to sit in the bottom and top of the case, shining up and down. It will look much better.

Maybe I'll just get the 100, and leave the top right without leds or something, wont I need a box if I'm running 2 or more strips?

[TheNinjaNextDor]

Maybe I'll just get the 100, and leave the top right without leds or something, wont I need a box if I'm running 2 or more strips?

It will come with everything including a 3 way splitter.

[Trail Mixorz]

It will come with everything including a 3 way splitter.

oh nice so I can get the 60cm with the remote and the 60cm without the remote and use them together on the tip and bottom?

[TheNinjaNextDor]

oh nice so I can get the 60cm with the remote and the 60cm without the remote and use them together on the tip and bottom?

Yep, with the same control point too.

[Trail Mixorz]

Yep.

and I could run both of them on one molex? Sorry for 20 questions haha

[TheNinjaNextDor]

and I could run both of them on one molex?

Yeah. You connect them to the splitter, that to the controller, then the controller to molex.

[zak rooley]

The question is do you really need RGB Led's its really simple to do it your self for one colour with a 12 volt light strip which are cheep and and use a molex's yellow wire (12V) and black wire which is ground just simple electronics with a quick google would teach you and you could use a infnate amount you could even extended it to go under your desk

[The Syndicate]

im curious as how to this would look in a 350D.

Please post pics of end result.

[Trail Mixorz]

im curious as how to this would look in a 350D.

Please post pics of end result.

Sorry I'm not buying these strips anymore

The question is do you really need RGB Led's its really simple to do it your self for one colour with a 12 volt light strip which are cheep and and use a molex's yellow wire (12V) and black wire which is ground just simple electronics with a quick google would teach you and you could use a infnate amount you could even extended it to go under your desk

I don't need anything but I want to have the rgb leds

[zak rooley]

Sorry I'm not buying these strips anymore

I don't need anything but I want to have the rgb leds

Yeah i understand it wouldnt be as easy to do rgb led's your self was just saying if you where just doing one colour you might as well do it your self