Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Not booting after Ram

Redux254
By Redux254
in Troubleshooting
 Share Followers 1
Posted

Hey guys, hoping to get some help.

 

Decided to increase my ram and after doing so my computer wont boot up.

 

When I turn it on the fans start up and the lights in the case do but after a couple seconds it goes off and then just keeps rebooting itself every couple seconds.

 

Nothing comes on my monitor. I have tried resetting the ram, different slots. I tried the old ram as well and same result.

 

CU-215-201      OEM INTEL CORE I7-6700K 4.0GHZ 8MB INTEL SMART CACHE    
HD-403-306      1TB HDD 3.5 SATAIII 7200RPM 
FA-104-116      CASE FAN 
FA-WATER-104    ASETEK 550LC 120MM

MB-445-108      GIGABYTE GA-G1.SNIPER Z170 LGA 1151 2 WAY SLI 3 WAY C  
       ROSSFIREX USB 3.1 ATX                    
VC-255-101      NVIDIA GEFORCE GTX 1070 8GB GDDR5 
SW-190-D10HE    WINDOWS 10 HOME
SW-190-110      WINDOWS 10 64-BIT RECOVERY 

HD-505-401      256GB INTEL 600P SERIES SSD PCIE NVME M.2 1800MB/560M   1      20.00      20.00
                B 80mm                                                                         
RM-602-111      KINGSTON 8GB DDR4-3000 HYPERX SAVAGE  
HD-504-291      240GB INTEL 540S SERIES SSD 2.5" SATAIII 6.0 GB/s 

 

Power supply is 750 watts, was swapping to 4 sticks of HyperX fury, ddr4, 3000

Link to post
Share on other sites
Posted

Try clearing CMOS with the new RAM installed.

BabyBlu (Primary Rig): 

  • CPU: Intel Core i9 9900K @ Per Core 5.2Ghz, 5.2Ghz, 5.2Ghz, 5.2Ghz, 5.1Ghz, 5.1Ghz, 5.0Ghz, 5.0Ghz; Cache @ 4.8Ghz; 0 AVX offset
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 CL14 @ 4000Mhz 16-18-18-36
  • GPU: MSI RTX 2080 Sea Hawk EK X
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB NVME, 3x ADATA Ultimate SU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB NVME
  • PSU: Corsair HX1000i
  • Monitor: Dell S2417DG 23.8" 2560x1440 165 Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: Corsair Scimitar Elite/MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ Per Core 5.0Ghz - 5.0Ghz - 4.9Ghz - 4.8Ghz, Cache @ 4.6Ghz, De-lidded
  • Motherboard: Asus Z97A
  • RAM: G.Skill Ripjaws X 4x4GB DDR3-2133 CL9 @ 2200Mhz 9-11-10-22
  • GPU: EVGA GTX 1080 FTW2 Gaming ICX
  • Case: Corsair Vengeance C70, With Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 1TB NVME
  • PSU: Corsair AX760
  • Monitor: Samsung C27JG56 27" 2560x1440 144Hz Curved Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: Rosewill RK 9000V2(Cherry MX Blue)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BlackBox (HTPC):

  • Intel Pentium G4600 (Kaby Lake)
  • Asus H110T/CSM Thin Mini-ITX
  • G.Skill 1x8GB DDR4-2400 SO-DIMM CL16
  • iGPU
  • Akasa Euler Fanless Solid Aluminum THIN Mini ITX Case (passively cooled)
  • Samsung 850 EVO 250GB
  • External 120W Power Adaptor
  • 4K TV
  • Passively cooled by the Akasa case. No moving parts!
  • Handheld QWERTY keyboard and trackpad.
  • Windows 10 Pro, Kodi autostarts on boot

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to post
Share on other sites
Posted

Did you try to plug the mobo speaker? the beeping sounds may tell the problem.

Also try to unplug all unecesary things, disks, usb... if it boots, plug again all things one by one and try to boot each time.

Wait about 30s each time you turn on the pc with more things pluged in, since it can reboot 1 or 2 times before it stays on.

Link to post
Share on other sites
Posted
2 minutes ago, HairlessMonkeyBoy said:

Try clearing CMOS with the new RAM installed.

yea, first of all

Link to post
Share on other sites
Posted
  • Author
1 hour ago, HairlessMonkeyBoy said:

Try clearing CMOS with the new RAM installed.

Cleared it but no change

Link to post
Share on other sites
Posted
2 minutes ago, Redux254 said:

Cleared it but no change

Clear CMOS again, this time with only 1 stick of the new RAM. Try that stick in every slot. If it doesn't work, try a different stick.

 

What is the new kit exactly? What is the part number?

BabyBlu (Primary Rig): 

  • CPU: Intel Core i9 9900K @ Per Core 5.2Ghz, 5.2Ghz, 5.2Ghz, 5.2Ghz, 5.1Ghz, 5.1Ghz, 5.0Ghz, 5.0Ghz; Cache @ 4.8Ghz; 0 AVX offset
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 CL14 @ 4000Mhz 16-18-18-36
  • GPU: MSI RTX 2080 Sea Hawk EK X
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB NVME, 3x ADATA Ultimate SU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB NVME
  • PSU: Corsair HX1000i
  • Monitor: Dell S2417DG 23.8" 2560x1440 165 Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: Corsair Scimitar Elite/MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ Per Core 5.0Ghz - 5.0Ghz - 4.9Ghz - 4.8Ghz, Cache @ 4.6Ghz, De-lidded
  • Motherboard: Asus Z97A
  • RAM: G.Skill Ripjaws X 4x4GB DDR3-2133 CL9 @ 2200Mhz 9-11-10-22
  • GPU: EVGA GTX 1080 FTW2 Gaming ICX
  • Case: Corsair Vengeance C70, With Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 1TB NVME
  • PSU: Corsair AX760
  • Monitor: Samsung C27JG56 27" 2560x1440 144Hz Curved Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: Rosewill RK 9000V2(Cherry MX Blue)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BlackBox (HTPC):

  • Intel Pentium G4600 (Kaby Lake)
  • Asus H110T/CSM Thin Mini-ITX
  • G.Skill 1x8GB DDR4-2400 SO-DIMM CL16
  • iGPU
  • Akasa Euler Fanless Solid Aluminum THIN Mini ITX Case (passively cooled)
  • Samsung 850 EVO 250GB
  • External 120W Power Adaptor
  • 4K TV
  • Passively cooled by the Akasa case. No moving parts!
  • Handheld QWERTY keyboard and trackpad.
  • Windows 10 Pro, Kodi autostarts on boot

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to post
Share on other sites
Posted
  • Author
7 minutes ago, HairlessMonkeyBoy said:

Clear CMOS again, this time with only 1 stick of the new RAM. Try that stick in every slot. If it doesn't work, try a different stick.

 

What is the new kit exactly? What is the part number?

 

16070986502068311772226968539934.jpg

Link to post
Share on other sites
Posted
  • Author
45 minutes ago, HairlessMonkeyBoy said:

Clear CMOS again, this time with only 1 stick of the new RAM. Try that stick in every slot. If it doesn't work, try a different stick.

 

What is the new kit exactly? What is the part number?

I appreciate the help.

I found the problem and will own up to my stupidity.

 

I THOUGHT I put them in completely as the clips closed on them, turns I was wrong.

 

Live and learn I suppose lol.

 

Thanks again.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Followers 1
Go to topic listing Troubleshooting

×