WIll it fit?

[Empire24453]

Using the following:

 

Case Phanteks Enthoo Pro M

Corsair H115i PRO that's 140mm fan

ATX board size

Corsair Vengeance RGB PRO 

 

Question! RIght now the AIO is on the top of the case, Rather it be on top. However, have no choice to remove and put it on the front of the case now since the memory sticks are to high and there is no clearies and enough space for the AIO to be on the top. JUst to confirm it will fit or not???????????

 

rather then messing around, thinking on where to be put and the spaces so that it clear from the corsair sticks

 

[TVwazhere]

1 minute ago, Empire24453 said:

remove and put it on the front of the case

it will fit or not???????????

These answers are always found on the product page  

http://www.phanteks.com/Enthoo-Pro-M.html

[Empire24453]

aware of that but time you have the fans and heatsink then the highness of the ram sticks it will fit? 

[TVwazhere]

4 hours ago, Empire24453 said:

aware of that but time you have the fans and heatsink then the highness of the ram sticks it will fit? 

Well if you were aware of it, you'd also see the lsited RAM clearances for 102mm and 140mm fans as well

And you can see the Corsair RAM height listed here:

Quote

First things first. The modules are unusually tall, standing at 51mm high, up 7mm on regular Vengeance RGB. Most enthusiast RGB modules tend to measure 40-44mm tall, so do be aware of the extra height restriction if contemplating for a small-form-factor PC.

  

https://hexus.net/tech/reviews/ram/118355-corsair-vengeance-rgb-pro-32gb-ddr4-3600-cmw32gx4m4c3600c18w/

RAM sticks only affect the mounting of the Top rad position