Ram locked at 2400, out of idea's :(

[RGoodall]

41 minutes ago, KarathKasun said:

Try swaping the modules around in the slots.  The SPD may be invalid on one of the sticks, and AFAIK the board only uses one modules SPD data.

yeah tried 1, works fine got it stable to 3600, tried the other 1 in the same slot, won't shift above 2400. I noticed on the ram themselves that under the hyperx it says 1915 and 1930, should these be the same number? No idea what this number stands for

[KarathKasun]

Hmmm, you could try booting with the one stick at 3200, recording the timings it sets with Ryzen Master, then manually setting all of the timings if they are different than what you tried before, plop the other module in and cross your fingers.

[RGoodall]

22 hours ago, KarathKasun said:

Hmmm, you could try booting with the one stick at 3200, recording the timings it sets with Ryzen Master, then manually setting all of the timings if they are different than what you tried before, plop the other module in and cross your fingers.

No joy, tried a multitude of things at this point, just going to buy another set and assume one of these is kaput. Thanks for all the suggestions anyways guys

[KarathKasun]

Just now, RGoodall said:

No joy, tried a multitude of things at this point, just going to buy another set and assume one of these is kaput. Thanks for all the suggestions anyways guys

Well crap.  It happens sometimes.