Jump to content

Hey all!

 

I'd like to replace my current air cooling setup in my case to something more effective. Not that its currently bad, but I want to do better.

 

I have a Cooler Master H500 case with the following config;

 

240mm AIO on the CPU, front mounted, push/pull with 2x 200mm fans on the outside and 2x 120mm fans on the inside.

3 x 120mm fans for exhaust (2 in roof, 1 at back).

 

Fans are 120mm Antec Prizm fans and the 200mm fans are the CM stock with the case.

 

Mobo is the X370-F with 7x 4 pin fan headers.

 

Should I just buy 5x Noctua 120mm fans and plug each into its own header?

 

Feedback on what I can do to make this the most effective and cool system possible is appreciated

SETUP:

  • Ryzen 9 3900XT @ 4.3 all core (peak core voltage 1.3)  (water)
  • 2x8GB TeamGroup 8Pack Ripped Edition 3600mhz CL14
  • RTX 2080ti OCd @ +150 core, +1000 memory (water)
  • Aorus B550 Elite (rev1)

 

Personal Bests:

  • Cinebench R15: 1785  1883 (Aug 2020)
  • Cinebench R20: 4136  4243 7125 7550 (Feb 2021)
  • 3DMark/Time Spy: 10,238 13,106 13,993 14,149 15,295 (Feb 2021)

Build Log: https://linustechtips.com/topic/1314971-the-ultimate-noctua-pc-15-fans-custom-loop-case-mods/

 

 

Link to comment
https://linustechtips.com/topic/1211212-ultimate-air-cooling/
Share on other sites

Link to post
Share on other sites

Mesh front version of the case?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1211212-ultimate-air-cooling/#findComment-13733340
Share on other sites

Link to post
Share on other sites

Is the case one of the mesh front versions...?

If not, is the mesh front available as an optional extra?  Might help...

 

EDIT:

@Jurrunio Looks like the non-mesh version should come with the mesh front in the box as an option...

**I frequently edit any posts you may quote; please check for anything I 'may' have amended.**

 

Current PC spec. in my profile.
Can I realistically call myself a gamer, if I only play ONE, twenty year old game...?

Did you test boot it, before you built in into the case?

WHY NOT...?!

Link to comment
https://linustechtips.com/topic/1211212-ultimate-air-cooling/#findComment-13733345
Share on other sites

Link to post
Share on other sites

27 minutes ago, Eighjan said:

EDIT:

@Jurrunio Looks like the non-mesh version should come with the mesh front in the box as an option...

Early versions don't, it's only media outlash on how bad the solid front is that CM started sending out mesh fronts within the box.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1211212-ultimate-air-cooling/#findComment-13733449
Share on other sites

Link to post
Share on other sites

31 minutes ago, Eighjan said:

Is the case one of the mesh front versions...?

If not, is the mesh front available as an optional extra?  Might help...

 

EDIT:

@Jurrunio Looks like the non-mesh version should come with the mesh front in the box as an option...

Mesh front, 100% I threw the acrylic front in  the attic.

SETUP:

  • Ryzen 9 3900XT @ 4.3 all core (peak core voltage 1.3)  (water)
  • 2x8GB TeamGroup 8Pack Ripped Edition 3600mhz CL14
  • RTX 2080ti OCd @ +150 core, +1000 memory (water)
  • Aorus B550 Elite (rev1)

 

Personal Bests:

  • Cinebench R15: 1785  1883 (Aug 2020)
  • Cinebench R20: 4136  4243 7125 7550 (Feb 2021)
  • 3DMark/Time Spy: 10,238 13,106 13,993 14,149 15,295 (Feb 2021)

Build Log: https://linustechtips.com/topic/1314971-the-ultimate-noctua-pc-15-fans-custom-loop-case-mods/

 

 

Link to comment
https://linustechtips.com/topic/1211212-ultimate-air-cooling/#findComment-13733469
Share on other sites

Link to post
Share on other sites

4 minutes ago, Jurrunio said:

it's only media outlash on how bad the solid front is that CM

Oh it was horrible 

 

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
https://linustechtips.com/topic/1211212-ultimate-air-cooling/#findComment-13733470
Share on other sites

Link to post
Share on other sites

Can confirm, mesh front on case.

 

Or else I'd be buying a different case, too :P

SETUP:

  • Ryzen 9 3900XT @ 4.3 all core (peak core voltage 1.3)  (water)
  • 2x8GB TeamGroup 8Pack Ripped Edition 3600mhz CL14
  • RTX 2080ti OCd @ +150 core, +1000 memory (water)
  • Aorus B550 Elite (rev1)

 

Personal Bests:

  • Cinebench R15: 1785  1883 (Aug 2020)
  • Cinebench R20: 4136  4243 7125 7550 (Feb 2021)
  • 3DMark/Time Spy: 10,238 13,106 13,993 14,149 15,295 (Feb 2021)

Build Log: https://linustechtips.com/topic/1314971-the-ultimate-noctua-pc-15-fans-custom-loop-case-mods/

 

 

Link to comment
https://linustechtips.com/topic/1211212-ultimate-air-cooling/#findComment-13733484
Share on other sites

Link to post
Share on other sites

I'd say just ditch the AiO & put an NH D14 (or similar) in it's place.

**I frequently edit any posts you may quote; please check for anything I 'may' have amended.**

 

Current PC spec. in my profile.
Can I realistically call myself a gamer, if I only play ONE, twenty year old game...?

Did you test boot it, before you built in into the case?

WHY NOT...?!

Link to comment
https://linustechtips.com/topic/1211212-ultimate-air-cooling/#findComment-13733499
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×