Radiators with multiple in/outlets

[scrytv]

Hey guys,

Im just wondering if there is a radiator with multiple in/outlets on different sides because i would like to mount it in the rear compartment of my o11 dynamic in a way that i am able to (if you are looking straight onto it) come in from my pump which is behind the mainboard in the lower psu spot (psu is moved in the upper mounting location) into the radiator without having to come through that rubber grommet and than im planning to exit the radiator on the front into the main compartment of the case.

 

Are there any slim 360mm radiator with such a setup, in/outlets on the sides and front?

And because im going to mount it in the back it has to be a slim one...

 

greetings from germany

[Bombastinator]

You want to use different sizes of tubing at the same time?  Just use the narrower stuf throughout.  Necking down tubes just makes the stuff in the bigger tube flow more slowly and creates pressure problems.  There’s just no win to be had.

[For Science!]

6 hours ago, scrytv said:

greetings from germany

Off the top of my head, Alphacool 45 mm radiators have ports on the edge as well. I don't know of any radiators that have them on the side as well except for the really thick HWlabs radiators. Not sure if the XT45 will fit in the O11 dynamic rear though...

 

https://www.alphacool.com/shop/radiatoren/radiatoren-aktiv/12340/alphacool-nexxxos-xt45-full-copper-360mm-radiator

 

 

5 hours ago, Bombastinator said:

 

OP wants radiator ports that are not in the standard layout, nothing to do with tubing size.

[W-L]

7 hours ago, scrytv said:

Hey guys,

Im just wondering if there is a radiator with multiple in/outlets on different sides because i would like to mount it in the rear compartment of my o11 dynamic in a way that i am able to (if you are looking straight onto it) come in from my pump which is behind the mainboard in the lower psu spot (psu is moved in the upper mounting location) into the radiator without having to come through that rubber grommet and than im planning to exit the radiator on the front into the main compartment of the case.

 

Are there any slim 360mm radiator with such a setup, in/outlets on the sides and front?

And because im going to mount it in the back it has to be a slim one...

 

greetings from germany

XSPC has a 35mm version of the multiport, if having that option is of high importance. However from the top of my head I don't recall the performance of this rad being very high comparing to similar units from Alphacool or hardware labs. 

http://www.xs-pc.com/radiators-ex-series/ex240-multiport-radiator