Need a little help. (Solved)

[lord of mush]

So I installed a new SSD today to get to the sata ports on my Motherboard I needed to take out my GPU witch has worked fine until now. When I boot I get this error. What do I do I cannot get into the UEFI I have been trying.

[Guest]

3 minutes ago, lord of mush said:

So I installed a new SSD today to get to the sata ports on my Motherboard I needed to take out my GPU witch has worked fine until now. When I boot I get this error. What do I do I cannot get into the UEFI I have been trying.

Just to clarify, pressing F1/2 does nothing? Id recommend doing the same thing you did to break your system in reverse. So in this case, take your gpu out and put it back in, try switching back to the old ssd and see if the problem persists

[Skiiwee29]

Reseat the GPU. if that doesnt work, clear CMOS by pulling the battery from it for about 10 minutes. 

[Guest]

4 minutes ago, Skiiwee29 said:

Reseat the GPU. if that doesnt work, clear CMOS by pulling the battery from it for about 10 minutes. 

10 minutes? 10 seconds will do most of the time...

[lord of mush]

10 minutes ago, OddGreyFox211 said:

Just to clarify, pressing F1/2 does nothing? Id recommend doing the same thing you did to break your system in reverse. So in this case, take your gpu out and put it back in, try switching back to the old ssd and see if the problem persists

Yes pressing F1 or 2 does nothing I see the LEDs on my keyboard are on But it wont register. Also I did not replace an SSD just added one. But I will take out the GPU and try again.

[lord of mush]

12 minutes ago, Skiiwee29 said:

Reseat the GPU. if that doesnt work, clear CMOS by pulling the battery from it for about 10 minutes. 

I cleared cmos I have a button for that. And repeated and unplugged all USB Deviced but my keyboard and mouse.

[lord of mush]

15 minutes ago, lord of mush said:

Yes pressing F1 or 2 does nothing I see the LEDs on my keyboard are on But it wont register. Also I did not replace an SSD just added one. But I will take out the GPU and try again.

I have taken the old drive out and repeated the GPU it is still an issue.

[Skiiwee29]

14 minutes ago, lord of mush said:

I cleared cmos I have a button for that. And repeated and unplugged all USB Deviced but my keyboard and mouse.

reseat the GPU. 

[i_build_nanosuits]

2 minutes ago, lord of mush said:

I have taken the old drive out and repeated the GPU it is still an issue.

check the PCIe power connectors on the graphics card make sure they are how they should be plugged and well...

[bmx6454]

do you have an igpu? if so, try to access bios through that instead

[lord of mush]

4 minutes ago, bmx6454 said:

do you have an igpu? if so, try to access bios through that instead

 

[lord of mush]

Just now, lord of mush said:

 

Same issue with the IGPU on my 9900k

[lord of mush]

16 minutes ago, bmx6454 said:

do you have an igpu? if so, try to access bios through that instead

It did not work...

[lord of mush]

55 minutes ago, OddGreyFox211 said:

10 minutes? 10 seconds will do most of the time...

I recalled hearing of an issue with corsair keyboards booting to UEFI in certain situations. I swapped to another keyboard and it booted from the igpu on my 9900k...🖐

[lord of mush]

[lord of mush]

Off as it may be this whole thing seems to have been resolved via swapping from my corsair K95 plat to a beater keyboard.....

[lord of mush]

Just now, lord of mush said:

Off as it may be this whole thing seems to have been resolved via swapping from my corsair K95 plat to a beater keyboard.....

 

[Neggy-Z]

Some corsair keyboards have/had a switch on them some where for compatibility issues, does yours have that? If so you could try the different positions to see if it fixes your issue