Jump to content

PC wont post after installing hdd

Sir_damian
 Share

Hey guys, I'm installing a second hdd to my system. My bott drive is a 500gbs m.2 so. But anyways when I plug everything in when I go to turn on pc the power light turn on for a second and fan started to spin but than everything went dark on me. And just stop. Than i decided to do another port on the motherboard for the hdd but i switch the sata 3 port to hot plug. So than when I did that computer started to actually boot but by the time I looked at the monitor it started to smoke. What could be wrong the raid setting is on ahci so I'm not sure if I have to change that there only 0 1 or 10 so I'm not sure which one to put it as if I have to. But any advice you guys can help me with?

Link to comment
Share on other sites

Link to post
Share on other sites

if it started smoking, your a bit past a software issue. what was smoking? if your not sure, look through everything until you find the damage.

Link to comment
Share on other sites

Link to post
Share on other sites

19 minutes ago, Sir_damian said:

Hey guys, I'm installing a second hdd to my system. My bott drive is a 500gbs m.2 so. But anyways when I plug everything in when I go to turn on pc the power light turn on for a second and fan started to spin but than everything went dark on me. And just stop. Than i decided to do another port on the motherboard for the hdd but i switch the sata 3 port to hot plug. So than when I did that computer started to actually boot but by the time I looked at the monitor it started to smoke. What could be wrong the raid setting is on ahci so I'm not sure if I have to change that there only 0 1 or 10 so I'm not sure which one to put it as if I have to. But any advice you guys can help me with?

I smell PSU issue. Have you taken a look inside to see if there are any signs of arcing? 

Intel® Core™ i7-12700 | GIGABYTE B660 AORUS MASTER DDR4 | Gigabyte Radeon™ RX 6650 XT Gaming OC | 32GB Corsair Vengeance® RGB Pro SL DDR4 | Samsung 850 EVO 250GB | WD Green 1.5TB | Windows 11 Pro

Sony MDR-V250 | GNT-500 | Logitech G610 Orion Brown | Logitech G402 | Samsung C27JG5 | ASUS ProArt PA238QR

Intel® Core™ i7-7600U | Seagate 500GB HDD | 16GB DDR4 | Windows 10 Enterprise | HP EliteBook 850 G4

Intel® Core™ i5-8520U | WD Blue M.2 250GB | 1TB Seagate FireCuda | 8GB DDR4 | Windows 11 Home | ASUS Vivobook 15 

Intel® Core™ i7-3520M | GT 630M | 16 GB Corsair Vengeance® DDR3 | Samsung 850 EVO 250GB | macOS Catalina Lenovo IdeaPad P580

iPhone 12 Mini (iOS 16.1) | iPhone XR (iOS 16.1) | iPad Mini (iOS 9.3.5) | KZ AZ09 Pro x KZ ZSN Pro X

Link to comment
Share on other sites

Link to post
Share on other sites

56 minutes ago, bmx6454 said:

if it started smoking, your a bit past a software issue. what was smoking? if your not sure, look through everything until you find the damage.

The hard drive I think it a faulty hard drive now.

Link to comment
Share on other sites

Link to post
Share on other sites

47 minutes ago, BlueChinchillaEatingDorito said:

I smell PSU issue. Have you taken a look inside to see if there are any signs of arcing? 

It's a new pc built like 2 weeks ago all I did was adding a hdd to it. Everything else is fine thou. 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


×