Jump to content

is the seasonic s12ii 620w good for this build?

Codebreaker3683

I'm on a very tight budget, I am going to buy a new PC. Please let me know if this PSU is ok or not. I'm very confused right now.

My specs:

Ryzen 5 3600

RTX 2070

MSI MORTAR MAX MOBO

G-Skill Trident-Z RGB 16GB DDR4 3200MHZ

 

Link to comment
Share on other sites

Link to post
Share on other sites

No

At least tier B, preferably higher.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

17 minutes ago, Cars Canadian said:

I would go up to 750 or 800 casue the graphics card

3600 dont even exceed 100w from the socket while RTX 2070 cant go over 250w no matter what you do to it, I see zero sense to go to 750w or more. Even 500w is sufficient

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Jurrunio said:

3600 dont even exceed 100w from the socket while RTX 2070 cant go over 250w no matter what you do to it, I see zero sense to go to 750w or more. Even 500w is sufficient

oh I thought they pulled quite a bit more, maybe im confusing them with a different one. Sry

Link to comment
Share on other sites

Link to post
Share on other sites

11 minutes ago, Codebreaker3683 said:

What about the Thermaltake smart se 630w?

That's even worse.

 

Where are you located?  U.S.?  Canada?  Europe?  UK?

 

Link to comment
Share on other sites

Link to post
Share on other sites

I'm from located in Bangladesh. How many watts do I need for this build? Will the ANTEC truepower 550 be ok or the NEO ECO II 550m 

 

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, Codebreaker3683 said:

I'm from located in Bangladesh. How many watts do I need for this build? Will the ANTEC truepower 550 be ok 

 

Is this the one you are talking about? It's Tier B, so it should be fine.

MAIN PC:

CPU: Intel® Core™ i9-9900K Processor  Motherboard: Gigabyte Z390 Aorus Pro Wifi  CPU Cooler: Scythe Fuma 2  GPU: EVGA RTX 3080 FTW3 Ultra  RAM: Corsair Vengeance 32GB (4x8GB) 3000Mhz CL15

Case: CoolerMaster TD500 Mesh PSU: Thermaltake GF1 PE 750w Storage: 1TB Western Digital Blue 3D + 1TB Crucial P1 + 1TB ADATA XPG Gammix S11 Pro + 4TB Seagate Barracuda 5400RPM OS: Windows 10 Home

Headphones: Philips SHP9500s   Keyboard: Corsair K70 RGB MK.2 Cherry MX Red  Displays: Gigabyte M27Q (27" 1440p 170hz IPS), Samsung UN32EH4003FXZA (32" 768p 60hz TV)

 

SECONDARY PC:

CPU: Intel® Core™ i3-9100F Processor  Motherboard: ASRock Z390 Phantom Gaming 4-CB  CPU Cooler: Arctic Alpine 12 CO  GPU: EVGA RTX 3060 XC RAM: ADATA XPG 16GB (2x8GB) 2400Mhz CL16

Case: CyberpowerPC Onyxia  PSU: ATNG ATA-B 800w 80 Plus Bronze  Storage: 500GB Samsung 850 EVO + 2TB Seagate FireCuda SSHD 5400RPM    OS: Windows 10 Home

 

Former parts that I've used: Acer XG270HU, Asus Dual OC 2080, Gigabyte Aorus Master 3080, Gigabyte Gaming OC 3080, EVGA XC3 Ultra 3080, EVGA FTW3 Ultra 3080 Ti

Link to comment
Share on other sites

Link to post
Share on other sites

27 minutes ago, Jurrunio said:

3600 dont even exceed 100w from the socket while RTX 2070 cant go over 250w no matter what you do to it, I see zero sense to go to 750w or more. Even 500w is sufficient

Thanks bro, I was so worried man

 

Link to comment
Share on other sites

Link to post
Share on other sites

Yes it will be. The S12II 620 is capable and well-built enough to handle pretty much any single-GPU setup. 

 

I have the S12II 500W with a Ryzen 3600 and a RX480, which will be at most only a 20-30W difference in power draw compared to your system, and performs perfectly.

"Rawr XD"

Link to comment
Share on other sites

Link to post
Share on other sites

3 hours ago, Aniallation said:

Yes it will be. The S12II 620 is capable and well-built enough to handle pretty much any single-GPU setup. 

 

I have the S12II 500W with a Ryzen 3600 and a RX480, which will be at most only a 20-30W difference in power draw compared to your system, and performs perfectly.

It's a 10 year old group regulated unit that performs like garbage when crossloaded. You don't want this powering a 3600/2070.

Link to comment
Share on other sites

Link to post
Share on other sites

11 hours ago, Aniallation said:

I have the S12II 500W with a Ryzen 3600 and a RX480, which will be at most only a 20-30W difference in power draw compared to your system, and performs perfectly.

mind you, these aren't the same thing

 

yours is a Seasonic ET, while S12ii x20 is a Seasonic GB Bronze.

 

for multiple reasons, I wouldn't let a S12ii run this system. It's group regulation, it not meeting haswell standards, it not having OTP/12v UVP and so on

 

it was a decent PSU at it's time, but not a decade later

Link to comment
Share on other sites

Link to post
Share on other sites

It has the power and integrity to run that setup. Older design but capable. Upgrade when you can.

Link to comment
Share on other sites

Link to post
Share on other sites

14 minutes ago, Gorilla Warfare said:

It has the power and integrity to run that setup. Older design but capable. Upgrade when you can.

Capable ? Yes. Recommended ? No. Because it wouldn't perform good under crossloads associated with modern PCs, you're unlikely to notice that as it's not that terrible, GPU and motherboard VRM will cope but that would degrade their lifetime.

Tag or quote me so i see your reply

Link to comment
Share on other sites

Link to post
Share on other sites

28 minutes ago, Gorilla Warfare said:

That's all speculation.

No, that's a common sense, if you have high-end PC - don't get low-end PSU.1.PNG.2bf7ee43ab80ca313587df6464dc5ffd.PNG

 

Tag or quote me so i see your reply

Link to comment
Share on other sites

Link to post
Share on other sites

I have this exact model powering a 2600 and a RTX 2060, plenty of drives and fans. It works fine. Despite its flawed design, it stays within spec in crossload tests (admittedly barely, but it does) and it does have UVP, unlike stated earlier.

 

But you shouldn't buy one. It's extremely old and, while it's one of the best GR units out there, it's GR. It will struggle under certain load scenarios that you will probably meet in your day-to-day, and it may not always handle those scenarios gracefully. It's a decade old. It's missing several protections that have been developed over the years.

 

You've got a lot of money invested in those parts. You want them to last. Get a decent-quality unit with a modern internal design. Drop the RGB tax on the RAM, or get a weaker GPU, but don't skimp on the PSU.

Link to comment
Share on other sites

Link to post
Share on other sites

2 hours ago, X1650 said:

it does have UVP

But not on the 12v rail.

 

As stated earlier. 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×