UnRaid: Can't access VM over network

[Senzelian]

I've managed to get a Alcatel OXE PBX running on a Linux VM inside UnRaid.

I've set the VM to use the network bridge br0 and gave the PBX a IP and GW address, but I still can't ping the PBX, nor can I ping from the PBX to any other network device.
Any ideas?

GW: 192.168.178.1 /24
UnRaid: 192.168.178.3 /24
OXE PBX: 192.168.178.5 /24

MyPC: 192.168.178.37 /24

 

 

VM network settings:

 

UnRaid network settings:

[Electronics Wizardy]

Does the vm get a dhcp address if you set it to use dhcp?

 

Does the vm's nic show up under brctl on the host?

 

 

[Senzelian]

5 minutes ago, Electronics Wizardy said:

Does the vm get a dhcp address if you set it to use dhcp?

 

Does the vm's nic show up under brctl on the host?

I can't set the PBX to use a DHCP provided address. At least I don't know of any way on how to do that on an OXE.

 

No clue what brctl is  
I don't see any way to select a certain NIC within the VM's settings either.

[Electronics Wizardy]

1 minute ago, Senzelian said:

I can't set the PBX to use a DHCP provided address. At least I don't know of any way on how to do that on an OXE.

 

No clue what brctl is  
I don't see any way to select a certain NIC within the VM's settings either.

DO other vms work on the host?

 

brtctl is a command on linux, try to ssh in.

[Senzelian]

3 minutes ago, Electronics Wizardy said:

DO other vms work on the host?

 

brtctl is a command on linux, try to ssh in.

I'll get back to you tomorrow if that's okay.
Don't have the nerves rn to install another VM to then try that out.