Jump to content

Chipset/vrm cooling?

DominicNikon
 Share
Posted

Hello, I was wondering is it worth it to liquid cool a Gigabyte Aorus Master X570 board with a monoblock (cpu+vrm) and a chipset waterblock or should i just cool the cpu? I know the Aorus master x570 has a heatpipe for its vrm and large heatsinks so i'm not sure if its needed or if it would be any good for looks.

Thanks in advanced

Link to comment
https://linustechtips.com/topic/1165198-chipsetvrm-cooling/
Share on other sites
Link to post
Share on other sites
Posted

No need for chipset unless you have a 3 slot card kicking out 300w of heat. You could check chipset temperature if you're worried, even 70C is fine for it

 

No need for VRM, only use it for looks which is in the "want" category

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1165198-chipsetvrm-cooling/#findComment-13375812
Share on other sites
Link to post
Share on other sites
Posted
  • Author
11 hours ago, Jurrunio said:

No need for chipset unless you have a 3 slot card kicking out 300w of heat. You could check chipset temperature if you're worried, even 70C is fine for it

 

No need for VRM, only use it for looks which is in the "want" category

Ok, my chipset is around 50C with graphics cards under 100% load.

This is the product picture of the monoblock what are your thoughts on the looks?

image.thumb.png.362c76be4a667d20757ca55bb77763e3.png

Link to comment
https://linustechtips.com/topic/1165198-chipsetvrm-cooling/#findComment-13376941
Share on other sites
Link to post
Share on other sites
Posted
4 hours ago, DominicNikon said:

Ok, my chipset is around 50C with graphics cards under 100% load.

This is the product picture of the monoblock what are your thoughts on the looks?

look ok, not a fan of watercooling myself

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1165198-chipsetvrm-cooling/#findComment-13377576
Share on other sites
Link to post
Share on other sites
Posted

I check the block manufactures then get a board they have stuff for. Normally ASUS for me. Get ram blocks while you are at it. 

Main RIg Lian Li O11 MINI, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz 

 

Link to comment
https://linustechtips.com/topic/1165198-chipsetvrm-cooling/#findComment-13379548
Share on other sites
Link to post
Share on other sites
Posted
7 minutes ago, DominicNikon said:

Wouldn't ram blocks make it look too crowded with the extra tubing involved?

Depends on how dedicated you are. Some of the best looking builds pull it off. 
My spare rig is kinda crowded but I like it that way. Seems worth while. 

Main RIg Lian Li O11 MINI, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz 

 

Link to comment
https://linustechtips.com/topic/1165198-chipsetvrm-cooling/#findComment-13379797
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×