prohibited sign on boot

[xcluse]

hi forum 

i have a issue and it is driving me CRAZY

after i boot in to clover i select boot macos high sierra the apple logo shows up and the load line it gets full until half and then it stops and gives me a prohibited sign what should i do i havent found any usefull information

my specs are

ASUS ROG STRIX H370-f GAMING

intel core i3 9100f

gtx 1060 3gb

2x4 gb crucial ram

intel stock cooler

and a sandisk cruzer blade 16 gb

usb 3 is not the problem and i doubt the bios is an issue 

[Meganter]

10 minutes ago, xcluse said:

 i doubt the bios is an issue 

Hello,

 

Yes it is if you didn't updated it, Z370 is for 8th gen, unless it's 9th gen ready too.

[Uptivuptiz]

Have you followed a guide to install clover?

[xcluse]

yes i have followed a guide on how to install clover because i did it once on my own that did not work so i needed to use a guide and an chipset update or motherboard issue wont be it because it runs fine i have a windows install on a separete drive and that works fine its my daily driver

 

i really hope i dont need to flash or something like that i am just a 14 year old guy so breaking the board would be a pretty big deal

Edited March 6, 2020 by xcluse

[Uptivuptiz]

5 minutes ago, xcluse said:

yes i have followed a guide on how to install clover

Can you provide a link to this guide?

[xcluse]

https://www.tonymacx86.com/threads/unibeast-install-macos-catalina-on-any-supported-intel-based-pc.285366/

i used this guide but in stead of catalina i used high sierra because my imac wont download catalina (and i takes ages to download:))

[Kilrah]

49 minutes ago, xcluse said:

and an chipset update or motherboard issue wont be it because it runs fine i have a windows install on a separete drive

Mac OS requires particular BIOS settings that don't matter for Windows.

[maxtch]

• macOS requires specific BIOS settings, so you need to follow those closely.
• macOS has no support of anything from nVidia after Kepler, or as of early 2020 anything recent at all, so you must use an older generation AMD graphics card like RX 580 to get proper graphics acceleration.
• You should be able to download any version of macOS Installer using any Mac from Apple website as a concrete DMG file. The DMG file contains a single PKG file, which installs the actual system installer (/Applications/Install macOS Catalina.app) for you.
• You should not use the F SKU as that will prevent you from using Sidecar and a few other features that relies on the integrated graphics. For those features your graphics don't matter at all. I would suggest a i5-9600K, as that is the exact same processor used in the 2019 iMac, along with that RX 580 8GB graphics.
• You must make sure your Clover installation have apfs.efi file.

[xcluse]

so its not possible with my system?